stephanie88 0 #1 Posted November 23, 2020 CAN I USE AN AUTOMOBILE OIL FILTER ? IF SO,WHAT PART NUMBER FROM NAPA? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,096 #2 Posted November 23, 2020 The preferred transmission filter for all models is a Wix 51410 or Napa 1410 because it does not have a by-pass valve Garry 1 1 Share this post Link to post Share on other sites
Pollack Pete 2,273 #3 Posted November 23, 2020 Are you looking for a transmission filter or an engine oil filter?Two different filters. 1 Share this post Link to post Share on other sites
Bill D 1,933 #4 Posted November 23, 2020 Napa 1762 for engine oil. Bill Share this post Link to post Share on other sites
peter lena 8,721 #5 Posted November 23, 2020 88, whatever filter you get , pre oil fill it on a bench , to soak in oil , so you do not have a dry engine start , pete Share this post Link to post Share on other sites
WheelhorseBob 1,549 #6 Posted November 23, 2020 3 hours ago, peter lena said: 88, whatever filter you get , pre oil fill it on a bench , to soak in oil , so you do not have a dry engine start , pete How would you screw in a horizontal filter without making a mess? Really curious as I fill the filters on all of my vehicles but not the Onans or Harley because they are horizontal. Btw I’ve purchased 2 of the Napa gold 1762’s recently. At 18 bucks it’s pricey. Share this post Link to post Share on other sites
Handy Don 12,460 #7 Posted November 23, 2020 Could you stand the tractor on its back end? 1 Share this post Link to post Share on other sites
peter lena 8,721 #8 Posted November 23, 2020 the oil , will soak the filter material , so the possibility of spill will be minimal , done that , pete Share this post Link to post Share on other sites
stephanie88 0 #9 Posted November 23, 2020 thank you everyone for your responses Share this post Link to post Share on other sites
BAM1 40 #10 Posted November 25, 2020 When I prefill a filter for a horizontal filter I will fill it only half way let that soak in, then slowly add trying not to fill to much so it can be turned on it's side. to avoid the mess of an oil spill. 1 Share this post Link to post Share on other sites
Horse Newbie 7,114 #11 Posted November 25, 2020 On 11/23/2020 at 2:10 PM, peter lena said: 88, whatever filter you get , pre oil fill it on a bench , to soak in oil , so you do not have a dry engine start , pete @peter lena Do you fill filter, let oil soak in, drain, install ?...or fill, let soak in then slap it on and clean up spilled oil ?...I'm serious... Share this post Link to post Share on other sites
Horse Newbie 7,114 #12 Posted November 25, 2020 Oh, nevermind...I didn't read the whole thread before I asked...my bad ! 1 Share this post Link to post Share on other sites
