Project "Snow Drift"

[SylvanLakeWH 25,560]

1 hour ago, Oldskool said:

Just a WARNING. If you are using Super Glue, make sure you dont have ANY on your finger before you step out to take a leak.🤣🤣🤣🤣

Just a quick thank you for not following your usual practice of including detailed pictures of your progress with each post... 

[Oldskool 6,644]

15 minutes ago, DennisThornton said:

 

I've been promoting you all along and now I'm being asked what's going on?

 

PS.  Holler if you need help.  Wallfish will be right there!

I'm al set lol

[Oldskool 6,644]

15 minutes ago, DennisThornton said:

 

I've been promoting you all along and now I'm being asked what's going on?

 

PS.  Holler if you need help.  Wallfish will be right there!

I'm all set lol

[Oldskool 6,644]

8 minutes ago, SylvanLakeWH said:

Just a quick thank you for not following your usual practice of including detailed pictures of your progress with each post... 

I guess I was lucky it was my picture taking finger ? 🤣🤣🤣🤣

[Oldskool 6,644]

So here it is. Headlight? Probably so.  Here's a before and after.

[DennisThornton 4,769]

What's is like to have so many watching your every step?

And speaking of?  We're watching!  Your every step?  Next step?  Yes?

Gads I love this but it is in slow motion....

I'm sorry.   Just anxious...   I ordered some popcorn... Sorry, when you can... OK, I'm better now. Just show us something tomorrow. 

Or when you can.  Crap!  No use!  Obviously I'm hooked....

[Oldskool 6,644]

4 minutes ago, DennisThornton said:

What's is like to have so many watching your every step?

And speaking of?  We're watching!  Your every step?  Next step?  Yes?

Gads I love this but it is in slow motion....

I'm sorry.   Just anxious...   I ordered some popcorn... Sorry, when you can... OK, I'm better now. Just show us something tomorrow. 

Or when you can.  Crap!  No use!  Obviously I'm hooked....

Today was slow. Gathering parts and all. The 1 headlight took a while to do but just had to do one. Tomorrow the engine goes in and the wiring starts. Hope to have this thing up and running soon. Once all the bugs are out of the drivetrain  I will start on the screw drives themselves

[ebinmaine 67,502]

17 minutes ago, DennisThornton said:

What's is like to have so many watching your every step?

And speaking of?  We're watching!  Your every step?  Next step?  Yes?

Gads I love this but it is in slow motion....

I'm sorry.   Just anxious...   I ordered some popcorn... Sorry, when you can... OK, I'm better now. Just show us something tomorrow. 

Or when you can.  Crap!  No use!  Obviously I'm hooked....

@Oldskool

I s'pose I gotta get my dismantling/remantling/paint dept going on some of our five projects and take some  pressure off....... Maybe I'll even help. 

[SylvanLakeWH 25,560]

1 minute ago, ebinmaine said:

Maybe I'll even help. 

 

... what...did...he... say...??? 

 

[ebinmaine 67,502]

17 minutes ago, SylvanLakeWH said:

 

... what...did...he... say...??? 

 

Maybe. 

Man code for "Not actually gonna happen". 

[8ntruck 7,004]

5 hours ago, Oldskool said:

Just a WARNING. If you are using Super Glue, make sure you dont have ANY on your finger before you step out to take a leak.🤣🤣🤣🤣

 

This might be a good thread subject for the 'Bumps and Bruses' section?

[Stormin 9,981]

7 hours ago, ebinmaine said:

I s'pose I gotta get my dismantling/remantling/paint dept going on some of our five projects and take some  pressure off....... Maybe I'll even help. 

 

[ebinmaine 67,502]

9 hours ago, Oldskool said:

So here it is. Headlight? Probably so.  Here's a before and after.

So how did we accomplish this?

 

Where did the lense come from?

 

[Oldskool 6,644]

1 hour ago, ebinmaine said:

So how did we accomplish this?

 

Where did the lense come from?

 

I started with a sealed push in type light. Using my 4.5in angle grinder I cut the lens off. Then trimmed and sanded the edge. I then placed that lens on top of the red lens and scored the shape with an awl. Again with the grinder I painstakingly cut the circle from the red lens. Filed and sanded to fit then Super glued it together. Taped off the clear lens then painted. 

[ebinmaine 67,502]

That looks just fine boy. You done alright....

[Oldskool 6,644]

21 minutes ago, ebinmaine said:

That looks just fine boy. You done alright....

Thanks. Well ya know, Necessity is the mother of invention. Where there is a will there is a way and all that jazz

[Oldskool 6,644]

Here we go. Varoom varoom lol 

[Oldskool 6,644]

All that plastic had to go. It looked to modern and it just didnt fit very well "size wise". So older tin was put on. Changed over to an older style dip stick and changed the air filter style to something older as well. On to the exhaust. Although I'm not sure which way to go with this build. A stack? Salt & Pepper sbaker style muffler even though they are kinda loud. Or go low and long and run it out of the back?

[Lee1977 6,659]

13 minutes ago, Oldskool said:

All that plastic had to go. It looked to modern and it just didnt fit very well "size wise". So older tin was put on. Changed over to an older style dip stick and changed the air filter style to something older as well. On to the exhaust. Although I'm not sure which way to go with this build. A stack? Salt & Pepper sbaker style muffler even though they are kinda loud. Or go low and long and run it out of the back?

It needs a stack. How about an aluminum baseball bat with the ends cut off.

[ebinmaine 67,502]

In my head I'm about 60% stack, 40% low and out the back...

[Oldskool 6,644]

9 minutes ago, Lee1977 said:

It needs a stack. How about an aluminum baseball bat with the ends cut off.

A stack would be easier I think. I can work better with steel then I can aluminum

[Oldskool 6,644]

7 minutes ago, ebinmaine said:

In my head I'm about 60% stack, 40% low and out the back...

I'm leaning the same way ... I think. 

[Lee1977 6,659]

2 minutes ago, Oldskool said:

A stack would be easier I think. I can work better with steel then I can aluminum

Come off the engine with steel turn it up and fit the baseball bat in it. 

[Oldskool 6,644]

Just now, Lee1977 said:

Come off the engine with steel turn it up and fit the baseball bat in it. 

It's a possibility 

[Oldskool 6,644]

A buddy had just stopped by. He heard what I was building. He said I needed a safety helmet.