Jump to content
Charbs152

C-175 hydro drive belt adjustment

Recommended Posts

Charbs152

Hello how can I adjust the belt? Eaton hydro

 

 

When the disengagement lever is pulled up, the hydro system is still engaged and will drive forward and reverse 

 

 

additionally, when the lever is down in the engaged position? The motion control lever hits it when in reverse.  
 

any adjustments I can make?

 

edit: my tractor has a Briggs 18hp opposed twin. I suppose I should take it apart and get a real look at the tensioner pulley 

 

thanks 

Edited by Charbs152

Share this post


Link to post
Share on other sites
 
Lee1977

There is no adjustment on a hydro drive belt. Rusty pulleys or the wrong belt would be my guess. There is adjustment to the hydro and the cam and the cam plate does wear out. I had to replace both on my 1989  520-H  last year after i bought it to get it to operate as it should.

When I got it had way to much reverse and was hard to get it stopped and back forward. I also replaced the original 1/4" joints with new heims joints. I don't have a C-175 I think the hydro adjustment would be similar.

The cam and cam plate adjustment should be in the owners manual.

 

Share this post


Link to post
Share on other sites
 
Charbs152
11 hours ago, Lee1977 said:

There is no adjustment on a hydro drive belt. Rusty pulleys or the wrong belt would be my guess. There is adjustment to the hydro and the cam and the cam plate does wear out. I had to replace both on my 1989  520-H  last year after i bought it to get it to operate as it should.

When I got it had way to much reverse and was hard to get it stopped and back forward. I also replaced the original 1/4" joints with new heims joints. I don't have a C-175 I think the hydro adjustment would be similar.

The cam and cam plate adjustment should be in the owners manual.

 

Thank you i will take a look

Share this post


Link to post
Share on other sites
 
edgro

If it should have originally had a Kohler, maybe with the  Briggs it takes a different belt?

Share this post


Link to post
Share on other sites
 
gwest_ca

1983 C-175 Twin Auto model 01-17KE03

Transmission drive belt 108502 - (HB/5L x 83" or 5/8" x 83")

 

1984 GT-1800 Twin Automatic model A1-18BE01

Transmission drive belt 108502 - (HB/5L x 83" or 5/8" x 83")

 

Garry

Share this post


Link to post
Share on other sites
 
Charbs152
16 hours ago, gwest_ca said:

1983 C-175 Twin Auto model 01-17KE03

Transmission drive belt 108502 - (HB/5L x 83" or 5/8" x 83")

 

1984 GT-1800 Twin Automatic model A1-18BE01

Transmission drive belt 108502 - (HB/5L x 83" or 5/8" x 83")

 

Garry

Thats what i have as well, just wanted to make sure i was looking at it correctly...

 

 

 

Edited by Charbs152

Share this post


Link to post
Share on other sites
 
Charbs152
19 hours ago, edgro said:

If it should have originally had a Kohler, maybe with the  Briggs it takes a different belt?

It does have a replacement briggs and it looks like someone wrote 5/8x82 on the belt cover, althought if thats what they used, its tight enough to drive tractor when disengaged.  I wonder if the OEM 83 will fit.  I must investigate further this weekend lol...but only after i replace the chain and sprockets on my blower!

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...