On going project
By
OldWorkHorse, in Restorations, Modifications, & Customizations
-
Similar Content
-
By sjoemie himself
You know those people that have too many projects?? Yeah me neither!
Another tractor added to the heard. Case International 585 with canopy/sunroof.
It's a 60-ish horsepower tractor with very limited electronic gimmicks. Has a nice tight turning radius. It was built in Doncaster from 1985 to 1990 and the hourmeter says it has ran 4700 hours since then, I'll take that with a grain of salt though.
Plan is to use it for all kinds of jobs around the house and barn/stable for my gf's horses.
Ofcourse it is not a new machine so there are things that will need looking after but all the basics are there.
Pictures you say? Sure!
-
By PWL216
I have for sale a 1984 C-105 with deck and Snowblower. I got this as part of a package. There’s no battery and I haven’t tried to start it. I’m selling it as a project. The deck has one spindle out, but with it, as prior owner claims bearing was replaced. The snowblower has the flag and looks to be in very good condition. All but 1 tire holds air. The mower is complete. Includes mule drive. The extra hood (c-175) you see in the picture can go with the tractor for an additional $50. Thx for looking.
-
By Spottedeventer
Hi! The shafts of my fathers old 314-8, deck number 73449 have worn to the point the blades don’t stay secured. I’ve struck out tonight trying to find a part number. If anyone can assist, I would greatly appreciate it.
thank you,
Patricia
-
By Thatoneguy
I finally decided to restore my grandpa's 1974 C-120 with the original HH120 motor on it.
It will be a big project and i look forward to getting it completed for everyone to see!
I would like to hear anyone's criticism or advice as i have never done a project this big especially engine work on this level!
Happy 4th to everyone out there!
BTW he (my grandpa) is waving at everyone in the picture!
-
By colbyeast
Looking for someone in the Northeast (New England area) that can look at my Kohler Magnum 14 ( over 2000hrs
)had rebuilt about 2 years ago (very little hours after rebuild)it's now blowing white smoke and going through oil, (checked breather :ok; cylinder has carbon build up no wear on cylinder wall) Could it be rings gone?Also needs carb work (throttle linkage very loose) Thanks in advance
-