RJ 58 or is it

[Frankenstein 58 213]

I really wanted to use my original tires on my build but I think they are to far gone. Major cracks and dry rot plus the beads are pretty tore up. What are you guys using for replacements. I did find the Carlisle tires. They look nice. 

[Frankenstein 58 213]

I wanted to use my original tires on this build but I think they are to far gone. Major cracks and dry rot plus the beads are pretty torn up. I some some Carlisle tires.?? What are you guys using as replacements  

[AMC RULES 37,132]

https://www.millertire.com/products/lawn-garden-tires/4-00-8/4-80-8-firestone-turf-guide-4-ply/

[Frankenstein 58 213]

Ok great. Thanks.  Front tires look great. The Carlisle rear looks closer to my original than the Firestone rear ag tho. 

[oliver2-44 9,765]

@Frankenstein 58 Sorry somehow I  haven't kept up with your thread.  if you havent replaced your gas tank filler neck yet, you can get as close to original as feasible filler necks from here.   I recently got a couple for my suburban projects.

[Frankenstein 58 213]

Thanks for the reply. I was reading a lot of old posts over the weekend maybe  to many  and I did find this. It’s on my Christmas list

[Frankenstein 58 213]

Has anyone one just turned their axle and drilled another pin hole 

[Frankenstein 58 213]

Finally some progress. Thanks for heading me in the right direction on this. Should work fine now 

[ebinmaine 67,695]

2 hours ago, Frankenstein 58 said:

Finally some progress. Thanks for heading me in the right direction on this. Should work fine now 

Looks really really good.

 

Forgive my ignorance cuz I've never done one of those ... is that a de-solder and resolder?

[Frankenstein 58 213]

No ignorance. Yes it is. It actually was pretty easy. 

[Frankenstein 58 213]

2 minutes to fix. 2 weeks to clean out tank

[Lane Ranger 10,968]

On 12/5/2020 at 3:09 PM, Frankenstein 58 said:

Has anyone one just turned their axle and drilled another pin hole 

that has been done before and Steveasaurus mentions this in one of his three piece transmission rebuild threads. 

[Frankenstein 58 213]

Thanks I will try and find it

[oliver2-44 9,765]

I turned and re-drilled a set as Steve’s thread had mention was an option. To help me center in the drill press vice I Ran the drill bit into the existing hole and got  the vice centered up.  The I swapped the shaft around and put a fowl in the existing hole. I put a vertical eleven on the dowel and that got me back to the same center in the vice. 
Be careful to not get the hole to far onto the shaft. You can have trouble with the ends of the shafts hitting in the differential. 

Edited January 4, 2021 by oliver2-44

[Frankenstein 58 213]

Ok thanks for the heads up

[Frankenstein 58 213]

Got holes drilled on the other side of the axles and so it seems two newly made ones appeared  my nephew decided he wanted to make new ones 

[DennisThornton 4,769]

On 10/19/2020 at 10:24 AM, bottjernat1 said:

Here is original sales literature for the rj58 and 59. I have this in a double sided glass frame

Awesome! 

If this is NOT in this forum's collection of files perhaps you would consider copying and uploading.

[Frankenstein 58 213]

New tires and tubes. New rear axles and repaired front spindle. Trans rebuilt with new bearings bushings and seals. Put dual axel seals on just to make sure they don’t leak. Still a ways to go but at least it looks like a tractor again

[Frankenstein 58 213]

It lives.!  It’s running and moving. Thanks everyone for their help on this. It’s been a lot of fun. 

[AMC RULES 37,132]

Nice W-H work!

Love that green!

[Frankenstein 58 213]

Thanks. And I do believe it’s staying that color