johnreece 0 #1 Posted October 8, 2020 I have a 1980 C-105, Id 01-10K801. Can someone lend me their experience on push blade fitment. The range of years that they would be compatible with mine. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #2 Posted October 8, 2020 Welcome to the forum. Earlier blades will fit but the handle to swing the blade may need to be modified to fit. 1980 and newer should be plug and play. The wider blades work better when angled. Dozer DNA of long tractor frame dozer blades 1968 model 6-4111 - First to fit LONG & SHORT frame tractors and first to mount under the rear axle with a loose A-frame crossbar - replaced by 1969 model [6-4112 + 6-9621] 1970-73 model [6-4113 + 6-9622] 1973-74 model [6-4113 + 6-9623] 1974 model [6-4114 + 6-9624] 1974 model 6-2131 1975 model 6-2132 1976 model 6-2133 1976 model 66-42BC01 1977 model 76-42BC01 1978 model 86-42BC01 1979 model 96-42BC01 1980 model 06-42BC01 - (Last blade to have a loose A-frame crossbar #7701) 1981-1984 model 06-42BC02 (Up to here including this one they are 42" wide) and (First blade to have a welded-in rear A-frame crossbar) 1984-1989 model 06-48BC01 (They are now 48" wide) - replaced by the following 1990 model 06-48BC02 (Last blade to have 3 angle positions) 1991-1993 model 06-48BC03 (First blade to have 5 angle positions) 1993-2001 model 79350 - (105-1502 kit adapts 2001 and older GT Classic-Series blades to fit 2002 and later tractors 2002 2004-2009 2012 model 79364 - (105-1501 kit adapts 79364 blade to fit 2001 and older GT Classic-Series) Garry Share this post Link to post Share on other sites
johnreece 0 #3 Posted October 8, 2020 Thanks, I had a like new blade with mine unused for many years and ignorantly sold it. I'm looking at a 96 2BC01 and wanted to get input on fitment. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #4 Posted October 8, 2020 It should fit. The 1978-79 tractors also had the wide hoodstand. Garry Share this post Link to post Share on other sites
johnreece 0 #5 Posted October 8, 2020 Thanks Gary! Best Regards Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #6 Posted October 8, 2020 If the angle lever interferes with the pto handle you can take the lever off and turn it around. Sometimes that is all it takes. Garry 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,494 #7 Posted October 8, 2020 Looks like you got the info you need! Love my C 105!!! Great machines!!! Love the Black Hoods!!! Share this post Link to post Share on other sites
