Goldnboy 910 #1 Posted September 22, 2020 Picked up this cultivator off of a Indian reservation. Can someone explain the slot with fixed pin and c shaped hitch? I could also use a source for two shanks and clamps 1 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #2 Posted September 22, 2020 Click on the fuzzy picture Garry Share this post Link to post Share on other sites
Goldnboy 910 #3 Posted September 22, 2020 16 minutes ago, gwest_ca said: Click on the fuzzy picture Garry You right about fuzzy even the manual is fuzzy Share this post Link to post Share on other sites
Lee1977 6,648 #4 Posted September 23, 2020 (edited) I don't know either. My guess is that those pieces change it from a slot hitch to a clevis hitch. Can't see enough of the rear cultivator or the c-shaped piece to see how.. The hitch you have is a clevis hitch. Edited September 23, 2020 by Lee1977 Share this post Link to post Share on other sites
Lee1977 6,648 #5 Posted September 24, 2020 (edited) The picture showing the attachment is on page 3 of operators manual. Extend the bar over the hitch and using a 5/8" pin that's not in your pictures . Pin the hitch through both top and bottom holes in the cultivator through the clevis hitch then tighten the two set screws on the clevis hitch. Edited September 24, 2020 by Lee1977 Share this post Link to post Share on other sites
Goldnboy 910 #6 Posted September 24, 2020 (edited) These two pieces are not shown in the manual how are they installed here's a close up of the hitch Edited September 24, 2020 by Goldnboy Share this post Link to post Share on other sites
Lee1977 6,648 #7 Posted September 24, 2020 29 minutes ago, Goldnboy said: These two pieces are not shown in the manual how are they installed here's a close up of the hitch I don't think you need them, might be for something else. Share this post Link to post Share on other sites
