grinchsr 626 #1 Posted September 13, 2020 I have a late 80's 520HC with a swept axle. Currently has a 60" deck on it with the special mule drive. I want to put my 48" on it with the standard mule but when I did the mule drive hits the axle and I can't get the belt onto the inner pulley. I came up with belt part number 94-2501 but one vendor says it is 102 inches and another says 103 inches or maybe they are both wrong. Am I missing another belt number that I don't know about. Deck #1548SC03 Tractor model is C1200E02 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #2 Posted September 13, 2020 I see 103". Click on the fuzzy picture. Garry Share this post Link to post Share on other sites
grinchsr 626 #3 Posted September 13, 2020 I failed to mention I tried a 102 inch belt. Would a 103 inch make that much of a difference? Like I mentioned the mule is up against the swept axle. Share this post Link to post Share on other sites
Ed Kennell 38,028 #4 Posted September 13, 2020 The 103" belt would give you 1/2" more clearance with the axle. Share this post Link to post Share on other sites
grinchsr 626 #5 Posted September 14, 2020 Ordered a 103" We will see. Thanks 1 Share this post Link to post Share on other sites
rick 233 #6 Posted September 15, 2020 For future information, the Gates crossover number is 6378, NAPA number is NBH 6378. I have a NAPA belt coming for my 48" mower. This belt measures ½ x 103.25. Share this post Link to post Share on other sites
grinchsr 626 #7 Posted September 15, 2020 Good info Rick Thanks Share this post Link to post Share on other sites
Bill D 1,910 #8 Posted September 15, 2020 I use the belts from TSC with no problems. Bill Share this post Link to post Share on other sites
grinchsr 626 #9 Posted September 15, 2020 Good idea Bill I forgot about them. Toro belts are getting a bit pricey Share this post Link to post Share on other sites
Ed Kennell 38,028 #10 Posted September 15, 2020 I also use the TSC belts with great success. The nice part is, free return if it does not fit. Sometimes I buy three, one size per the manual, one under and one oversize. Keep the one that works best and return the other two. Just keep the belts and the sleeve clean. Share this post Link to post Share on other sites
