JustinW.73 224 #1 Posted September 1, 2020 Restoring my 856 and need a voltage regulator for it. I’ve only found one place to get a s/g mounted one and it wasn’t quite right. Anyone know where to get one? Share this post Link to post Share on other sites
peter lena 8,580 #2 Posted September 1, 2020 if you have the original # and type , you could try THE ROP SHOP, i have picked up a number of tractor related parts on their site. did a cross check and verified the part specifications , then looked it up on their site, good source, pete 2 Share this post Link to post Share on other sites
Achto 27,504 #3 Posted September 1, 2020 1 hour ago, JustinW.73 said: Anyone know where to get one? I use the regulators from this site. Part #AHGDR6004 I have had good luck with them. http://www.psep.biz/store/kohler_starter_motors.htm 4 Share this post Link to post Share on other sites
pfrederi 17,665 #4 Posted September 1, 2020 Unless you are a stickler for restoration accuracy you can use any 12v saddle mount either 3 terminal or 4 4 Share this post Link to post Share on other sites
squonk 41,023 #5 Posted September 1, 2020 (edited) I just got this one for my 1075 Came from DB electrical https://www.dbelectrical.com/products/generator-regulator-12-volt-four-terminal-two-unit-8040-6171.html Edited September 1, 2020 by squonk 2 Share this post Link to post Share on other sites
JustinW.73 224 #6 Posted September 1, 2020 34 minutes ago, squonk said: I just got this one for my 1075 Came from DB electrical https://www.dbelectrical.com/products/generator-regulator-12-volt-four-terminal-two-unit-8040-6171.html That was the one I was looking at but was afraid of how much taller the bracket is and thought it would look weird. Share this post Link to post Share on other sites
wallfish 16,985 #7 Posted September 1, 2020 1 hour ago, JustinW.73 said: That was the one I was looking at but was afraid of how much taller the bracket is and thought it would look weird. The mounting bracket is curved to fit on the generator. It doesn't stand off that high 3 Share this post Link to post Share on other sites
953 nut 55,075 #8 Posted September 1, 2020 1 hour ago, JustinW.73 said: afraid of how much taller the bracket is and thought it would look weird. Looks just like the stock Delco Regulator to me. 3 Share this post Link to post Share on other sites
SPINJIM 1,981 #9 Posted September 2, 2020 Try I Save Tractors . Google them for their website. Share this post Link to post Share on other sites
JustinW.73 224 #10 Posted September 4, 2020 On 9/1/2020 at 5:40 PM, wallfish said: The mounting bracket is curved to fit on the generator. It doesn't stand off that high Not that part of the bracket. I ordered it so we’ll see. 1 Share this post Link to post Share on other sites
