parts for 42 inch mower deck

[1963 ford truck 1]

I have a WH C161 tractor w/ a 42 inch side discharge mower deck. The machine had been sitting for many years before I bought it. I got the engine and drive train running smoothly. I am in the process of freeing up and rebuilding the mower deck. I need replacement bolts and teflon brackets for the tension arm assembly, and possibly other parts. I have gone to local wheel horse distributors and they either don't stock the parts, or can't look them up because the deck has no. I.D. plate on it. I do have the I.D. plate on the tractor and engine. It is all Original WH equipment. Possibly 1980's. Is there any on-line parts suppliers for these kind of parts? 

[gwest_ca-(File Mod) 11,045]

That appears to be a 48" width of cut deck.

Only deck to have the heavy top plate

Adjuster on the left side.

 

Possible models

Mower DNA 48" side discharge

1966-1967 model RL-486 replaced by

1968 model 5-1481

1969 model 5-1482

1970 model 5-1483

1971 model 5-1200

1972 model 5-1201

1973 model 5-1202

1973-1974 model 5-1210

1975 model 5-1211

1976 model 65-48MS01

1976 model 65-48MS02

1977 model 75-48MS01 - These all used blades with 5/8" x 3/4" double-D center hole unless the spindles have been upgraded.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Note - 3/4" or .750" is 19.05mm

1977 model 75-48MS02 - Uses 6203 bearings with 3/4" ID - (First deck to use blades with 3/4" center hole) - Originally had a nylon-insert nut holding spindle pulley on.

1978 model 85-48MS01 - Uses 6203 bearings with 3/4" ID - Originally had a nylon-insert nut holding spindle pulley on.

1979 model 95-48MS00 - Uses 6203 bearings with 3/4" ID - Originally had a nylon-insert nut holding spindle pulley on.

1979 model 95-48MS01 - Uses 6203 bearings with 3/4" ID - Originally had a nylon-insert nut holding spindle pulley on.

1980 model 05-48MS01 - Uses 6203 bearings with 3/4" ID - Originally had a nylon-insert nut holding spindle pulley on.

1981-1983 model 05-48MS02 - Uses 6203 bearings with 3/4" ID - Originally had a nylon-insert nut holding spindle pulley on.

1984 model 05-48MS03 - Uses 6203 bearings with 3/4" ID - Originally had a nylon-insert nut holding spindle pulley on.

 

Note - 17mm is .669"

1985 model 05-48MS04 - Uses 6203 bearings with 17mm ID - Originally had a standard nut and lockwasher holding spindle pulley on.

1986-1988 model 05-48MS05 - Uses 6203 bearings with 17mm ID - Originally had a standard nut and lockwasher holding spindle pulley on.

1987-1988 model 05-48SC01 - Uses 6203 bearings with 17mm ID - Originally had a standard nut and lockwasher holding spindle pulley on.

1989 model 15-48SC01 - Uses 6203 bearings with 17mm ID - Originally had a standard nut and lockwasher holding spindle pulley on.

1990 model 15-48SC02 - Uses 6203 bearings with 17mm ID - Originally had a standard nut and lockwasher holding spindle pulley on.

1991-1992 model 15-48SC03 - Uses 6203 bearings with 17mm ID - Originally had a standard nut and lockwasher holding spindle pulley on.

1993-1997 model 78360 - Uses 6203 bearings with 17mm ID - Originally had a standard nut and lockwasher holding spindle pulley on.

1998-2007 and 2009-12 model 78361 - Uses 6203 bearings with 17mm ID - (These all use blades with 3/4" center hole) - Originally had a standard nut and lockwasher holding spindle pulley on.

 

Garry

[RJ Hamner 1,007]

Lane Ranger had some of the Teflon parts made and had them at the BigShow a couple of years ago.  He may have some left

[Goldnboy 920]

I have a pair of used  Teflon slides. 

 

Pm If you want a pair of used ones.

 

 

[Goldnboy 920]

I can get you pictures  today or tomorrow  but I sell a pair for $12 shipped

[76c12091520h 3,620]

 I have any thing you need (pulleys,spindle assy's. idler bars, for that deck on hand, let me know if I can help