Helped a friend on a house project of his for this

[The Tuul Crib 7,336]

So I just made it home today with my new find well actually a little labor trade for material. This is the lean to roof for my new horse shed. Got 10 sheets of 14 foot by 3 foot wide black 22 gauge sheet metal.

[ebinmaine 67,283]

Super cool. Do I see a 12 x 28 lean-to in the future?

[The Tuul Crib 7,336]

38 minutes ago, ebinmaine said:

Super cool. Do I see a 12 x 28 lean-to in the future?

Quite possibly Eric. I still have to finish my back porch with that first batch of steel. Then I have to fit in my new kitchen build in between! I plan on having my charger running by this fall! This ought to be interesting to say the least!

[The Tuul Crib 7,336]

And not to mention we were right in the middle of a tornado warning at this moment with the sirens going off constantly in the neighborhood. The guy that I got the metal from was insisting that I pick it up now because he didn't want it here no more. So we had to ride the storm out! Hmmm ridin the storm out... Anyway now we are expecting 3 to 4 inches of rain overnight🙃🙃🙃weeeeeee!!!!

[ebinmaine 67,283]

WOW

 

Be safe!!

 

Then get busy. You got a lot to do!!!!

[ZXT 2,401]

Very cool! Be sure to get the metal off the truck and weighted down before the big wind gets there! It might provide too much lift if you don't! 

[The Tuul Crib 7,336]

38 minutes ago, ZXT said:

Very cool! Be sure to get the metal off the truck and weighted down before the big wind gets there! It might provide too much lift if you don't! 

The big winds have already arrived around 2 to 3 this afternoon. Got the metal loaded up after the storms. Well the first wave came through then I loaded got  it up and unloaded now it's just nothing but steady rain!!!