Ron Vander Tuuk 4 #1 Posted August 22, 2020 Is it possible to have a air lock in the hydro. When I start and put it in gear it takes up to 15 seconds to move. Once it goes forward or back it works fine. Tractor has set for a long time before I got it. It was kind of jerky when I first started running it but now has smoothed out. I am new at this whole game so any info would be appreciated . Share this post Link to post Share on other sites
pfrederi 17,866 #2 Posted August 23, 2020 When was last fluid and filter change.... 1 Share this post Link to post Share on other sites
8ntruck 7,082 #3 Posted August 23, 2020 Is the fluid level in the transmission correct? Share this post Link to post Share on other sites
Ron Vander Tuuk 4 #4 Posted August 23, 2020 Don't know when it was changed because I just got it. Ready to change it but read that you might have to prime it. Can't find any info on how to do that. Share this post Link to post Share on other sites
pfrederi 17,866 #5 Posted August 23, 2020 No need to prime. Wix 51410 filter. Fluid is either ATF (Dexmerc) will be cherry red or 10w-30 motor oil (tan) Use whatever is in there now do not mix!! Share this post Link to post Share on other sites
Ron Vander Tuuk 4 #6 Posted August 23, 2020 Thanks. Going to change it this week. Share this post Link to post Share on other sites
