Jump to content
Sammy

1969 gt14

Recommended Posts

Sammy

I have a 1969 gt14 that I bought for $300 and I’m wondering if anyone could tell me anything about them like production numbers, how to locate the serial number, etc.... and if there is a common issue with the k321 where it knocks because this one knocks a good bit.

EFD888FA-9C65-4875-9CD3-719014B231C7.jpeg

FB8E8189-C850-4BF5-B6B8-4C7064241220.jpeg

  • Like 4

Share this post


Link to post
Share on other sites
 
gwest_ca

Can see the ID plate at the right side of the dash housing. Should have model number, serial number and possibly the Julian build date. Post the numbers and will add to the correct list.

Garry

Tractor GT-14 Serial SS.jpg

  • Like 1

Share this post


Link to post
Share on other sites
 
71_Bronco

I dont know anything about these models, but I'd say you got a great machine for $300 if it runs and works properly.

 

I'd start with an oil change on the motor.

Share this post


Link to post
Share on other sites
 
lynnmor

If you are sure it is a pre-ignition knock, pull the head and clean out the carbon.  Also check that it has the correct spark plug.  If the knock is mechanical, time to tear it down before it self destructs.

Share this post


Link to post
Share on other sites
 
stevasaurus

Here is what a stock one looks like...sorry about the Photo Bucket water mark.  

 

 

 

Share this post


Link to post
Share on other sites
 
19richie66

Someone converted it to manual pto, which isn’t a bad thing. One less electrical thing to worry about. Is the grille open in the front and the fuel tank pokes through? That would be a 1969 grille. The rest are solid front. 

Share this post


Link to post
Share on other sites
 
Sammy
10 hours ago, gwest_ca said:

Can see the ID plate at the right side of the dash housing. Should have model number, serial number and possibly the Julian build date. Post the numbers and will add to the correct list.

Garry

Tractor GT-14 Serial SS.jpg


the plate says that the model number is 17441 and the serial number is 568053. 

Edited by Sammy

Share this post


Link to post
Share on other sites
 
Sammy
5 hours ago, 19richie66 said:

Someone converted it to manual pto, which isn’t a bad thing. One less electrical thing to worry about. Is the grille open in the front and the fuel tank pokes through? That would be a 1969 grille. The rest are solid front. 


I thought it came with the manual pto but I guess not, and the grille is open with the gas tank through it so it’s a 1969.

Share this post


Link to post
Share on other sites
 
Sammy
8 hours ago, 71_Bronco said:

I dont know anything about these models, but I'd say you got a great machine for $300 if it runs and works properly.

 

I'd start with an oil change on the motor.


well other than the knock it works great and ok will do.

  • Like 2

Share this post


Link to post
Share on other sites
 
Pullstart

A video of it running would help determine the type of knock :handgestures-thumbupright:

  • Like 1

Share this post


Link to post
Share on other sites
 
ZXT
16 minutes ago, pullstart said:

A video of it running would help determine the type of knock :handgestures-thumbupright:

:text-yeahthat:

 

Sammy, congrats on getting an excellent tractor! I love GT-14's.

Share this post


Link to post
Share on other sites
 
Sammy
50 minutes ago, pullstart said:

A video of it running would help determine the type of knock :handgestures-thumbupright:


I can definitely get one tomorrow morning and also how do I upload a file of more than 14.78MB?

  • Like 1

Share this post


Link to post
Share on other sites
 
ZXT
41 minutes ago, Sammy said:


I can definitely get one tomorrow morning and also how do I upload a file of more than 14.78MB?

Non-paid members can only upload 16mb. You have to become a supporter to remove that cap.

 

If you're trying to upload a video, it's best to upload it to youtube rather than directly to the site if you know how. Videos take up enormous amounts of server space.

  • Like 1

Share this post


Link to post
Share on other sites
 
 
cafoose
20 hours ago, 19richie66 said:

Someone converted it to manual pto, which isn’t a bad thing. One less electrical thing to worry about. Is the grille open in the front and the fuel tank pokes through? That would be a 1969 grille. The rest are solid front. 

I have a GT-14 that I converted to manual PTO. Could you please post a close up picture of how the upper bracket is mounted to the hood stand? :banana-wrench::text-thankyouyellow:

13 hours ago, Sammy said:


I can definitely get one tomorrow morning and also how do I upload a file of more than 14.78MB?

Here is a link to become a supporter so you can upload unlimited pictures:

https://www.wheelhorseforum.com/store/ 

Share this post


Link to post
Share on other sites
 
Sammy
12 hours ago, Sammy said:


I can definitely get one tomorrow morning and also how do I upload a file of more than 14.78MB?

 

 there is the video of the knock, also the rings are trashed.

FE97F0FB-85F4-4D2D-BC8A-A18C3672455F.jpeg

2ABFAE25-4175-4FBC-AEF1-365BFEE76DA1.jpeg

Share this post


Link to post
Share on other sites
 
Sammy
19 minutes ago, cafoose said:

I have a GT-14 that I converted to manual PTO. Could you please post a close up picture of how the upper bracket is mounted to the hood stand? :banana-wrench::text-thankyouyellow:

Here is a link to become a supporter so you can upload unlimited pictures:

https://www.wheelhorseforum.com/store/ 


There are pictures of the setup on mine. And ok thank you!

51434B3C-677E-4D8C-8874-8EA0F27E3909.jpeg

A0F3872C-357B-4011-BCDB-88E0BD37C16F.jpeg

Share this post


Link to post
Share on other sites
 
cafoose
20 minutes ago, Sammy said:


There are pictures of the setup on mine. And ok thank you!

51434B3C-677E-4D8C-8874-8EA0F27E3909.jpeg

A0F3872C-357B-4011-BCDB-88E0BD37C16F.jpeg

Thank you! here's a thread on my conversion:

 

 

Share this post


Link to post
Share on other sites
 
lynnmor

A pre-ignition knock would happen with the engine under heavy load, your video is of the engine not loaded at all.  So, IMHO, you have an engine in serious need of an overhaul.  The carbon and oil in the cylinder head, plus your analysis says it all.

  • Like 1

Share this post


Link to post
Share on other sites
 
19richie66

 Might be able to find a good used one especially in the area you are from. All kinds if stuff around PA. Search facebook marketplace 👍

Share this post


Link to post
Share on other sites
 
ZXT

That engine is about to put a window in the block. I wouldn't run it any more. Looks like you're in for a complete rebuild, or finding a good used engine as Richie suggested. 

Share this post


Link to post
Share on other sites
 
Sammy

Thank you to everyone who got back to me and I’ll have to pull the engine this fall and overhaul it. Would anyone know of a place to get the plastic panels for a gt14 being the dash and console plastics?

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...