19richie66 17,542 #76 Posted September 26, 2020 10 hours ago, sqrlgtr said: 69 GT 14 Very nice! 1 Share this post Link to post Share on other sites
JCM 9,902 #77 Posted October 30, 2020 That picture from Andover CT by member #2 today got me thinking it may be time for some additions to Front end Friday. 1 2 Share this post Link to post Share on other sites
AMC RULES 37,144 #78 Posted October 30, 2020 OH man! 1 Share this post Link to post Share on other sites
19richie66 17,542 #79 Posted October 31, 2020 All I got Filter friday? 3 2 3 Share this post Link to post Share on other sites
JCM 9,902 #81 Posted October 31, 2020 Leo has been talking it up about how he enjoyed the Meet n Greet in Maine down in Massachusetts, hope we didn't start something we can't handle, can't say you didn't warn us Craig. 3 3 Share this post Link to post Share on other sites
AMC RULES 37,144 #83 Posted October 31, 2020 Yep told you guys... if you build it they will come. Just like I've aready got two more tractors lined up for after this one leaves. 3 1 Share this post Link to post Share on other sites
19richie66 17,542 #85 Posted October 31, 2020 Ok Kevin......it already hurts bad enough I will never find a senior. Enough rubbing it in. Seriously though, nice tractor. 1 Share this post Link to post Share on other sites
Pullstart 63,435 #86 Posted October 31, 2020 2 minutes ago, 19richie66 said: Ok Kevin......it already hurts bad enough I will never find a senior. Enough rubbing it in. Seriously though, nice tractor. Some day, I’ll find the time to start it! Share this post Link to post Share on other sites
Tractorhead 9,065 #88 Posted October 31, 2020 6 4 1 Share this post Link to post Share on other sites
cschannuth 3,817 #89 Posted November 1, 2020 I’m not sure if this is a couple days late or a couple months late but I thought I’d jump in. 2 4 Share this post Link to post Share on other sites
pfrederi 18,126 #90 Posted November 13, 2020 (edited) OK a few hours early...but meet Cyclops. Richard, 953Nut @953nut should recognize her. Spent the last couple years on loan to a neighbor mowing his 2.5 acres. This year he bought a new Kubotoa 2601 with deck and FEL (about $20k) so she was excess. I didn't need another mower but I did need a Paver Plow Tractor.. 98% of what i plow is dirt. However there is about 60 ft of pavers and the other half prefers they not be scratched up. Some PO painted her black and since painting is not something i like she stays that way.. Added a LED head light (she never had lights) fitted front mount to have a plow aligning pin and added some front weight. Can't use my normal roller chain. Rear has rubber chains and 65 lbs weight on each wheel.. Added a Wheel horse parts and more receiver hitch, (have to find some more weights to hang on it), and added a poly plastic blade edge. The light is a single but it is really really bright. (Note in 20 years i have plowed snow twice after sunset... once just to check out some new LEDs I put on my main plow tractor.. You can't beat Charger/Electros for winter duty. Edited November 13, 2020 by pfrederi 4 3 1 Share this post Link to post Share on other sites
Pullstart 63,435 #91 Posted November 13, 2020 Sorry Richie, I’m still just so excited about it! 1 3 Share this post Link to post Share on other sites
SylvanLakeWH 26,492 #92 Posted November 13, 2020 Michigan Mask Mandate compliant... 1 1 2 Share this post Link to post Share on other sites
ebinmaine 69,583 #94 Posted November 13, 2020 12 hours ago, pfrederi said: OK a few hours early...but meet Cyclops. Richard, 953Nut @953nut should recognize her. Spent the last couple years on loan to a neighbor mowing his 2.5 acres. This year he bought a new Kubotoa 2601 with deck and FEL (about $20k) so she was excess. I didn't need another mower but I did need a Paver Plow Tractor.. 98% of what i plow is dirt. However there is about 60 ft of pavers and the other half prefers they not be scratched up. Some PO painted her black and since painting is not something i like she stays that way.. Added a LED head light (she never had lights) fitted front mount to have a plow aligning pin and added some front weight. Can't use my normal roller chain. Rear has rubber chains and 65 lbs weight on each wheel.. Added a Wheel horse parts and more receiver hitch, (have to find some more weights to hang on it), and added a poly plastic blade edge. The light is a single but it is really really bright. (Note in 20 years i have plowed snow twice after sunset... once just to check out some new LEDs I put on my main plow tractor.. You can't beat Charger/Electros for winter duty. Paul is that side deflection prevention setup just angle iron off the frame? I'd love to set something up a lot like that on Trina's 867. Share this post Link to post Share on other sites
bds1984 1,457 #96 Posted November 13, 2020 1 hour ago, ebinmaine said: Paul is that side deflection prevention setup just angle iron off the frame? I'd love to set something up a lot like that on Trina's 867. Eric, I made one that locks in on the front quick attach mount on my 520; basically two pieces of 1/2" round-stock welded together to form a big T. It definitely made the plow more stable but made me realize I need more weight up front. 2 Share this post Link to post Share on other sites
ebinmaine 69,583 #97 Posted November 13, 2020 5 minutes ago, bds1984 said: Eric, I made one that locks in on the front quick attach mount on my 520; basically two pieces of 1/2" round-stock welded together to form a big T. It definitely made the plow more stable but made me realize I need more weight up front. I've got one of those that I'm going to be putting on the Cinnamon Horse. Front weight on that one won't be an issue because of the oversized liquid filled front tires. Trina's tractor has no weight yet but I do have some to put on. I just need to build a bracket and I like the idea of having to stabilizer there as well. Share this post Link to post Share on other sites
bds1984 1,457 #98 Posted November 13, 2020 3 minutes ago, ebinmaine said: I've got one of those that I'm going to be putting on the Cinnamon Horse. Front weight on that one won't be an issue because of the oversized liquid filled front tires. Trina's tractor has no weight yet but I do have some to put on. I just need to build a bracket and I like the idea of having to stabilizer there as well. It will save a lot of stress on the transmission/frame mounting area. All my tires are filled and have weights on them, and despite the M18 up front, I still find myself needing more weight to push snow and turn. The next step for me would be swapping out the reversed ags in favor of tri-ribs. 1 Share this post Link to post Share on other sites
ebinmaine 69,583 #99 Posted November 13, 2020 2 minutes ago, bds1984 said: It will save a lot of stress on the transmission/frame mounting area. All my tires are filled and have weights on them, and despite the M18 up front, I still find myself needing more weight to push snow and turn. The next step for me would be swapping out the reversed ags in favor of tri-ribs. Could you run a roller chain or do you plow asphalt? Share this post Link to post Share on other sites
dalez 138 #100 Posted November 13, 2020 Tucked away. 2 Share this post Link to post Share on other sites
