608KEB 795 #1 Posted June 29, 2020 How do I release the tension on the motion control for the transmission. I installed a foot pedal. It won't go back to neutral easily. 1 Share this post Link to post Share on other sites
JAinVA 4,620 #2 Posted June 29, 2020 Turn the nut CCW on the elongated slot portion. 1 Share this post Link to post Share on other sites
JAinVA 4,620 #3 Posted June 29, 2020 Just to be clear the upper plate closet to the camera.You can see where the washer rubs. Share this post Link to post Share on other sites
JCM 9,391 #4 Posted June 29, 2020 I would be interested in your opinion @608KEB of that hydro pedal once you put it through a workout. Thanks 1 Share this post Link to post Share on other sites
608KEB 795 #5 Posted June 30, 2020 9 hours ago, JCM said: I would be interested in your opinion @608KEB of that hydro pedal once you put it through a workout. Thanks It's actually the 2nd one I installed. I put one on the 520H I use for a dedicated snow machine. I also have a homemade one that came with a 520th I bought 5 years ago. I like the homemade one the best. Because it has a flat plate for reverse. The 2 that I installed work really good. But I'm not a big fan of the reverse pedal. But, I haven't used this much yet to cut grass. I'll try to remember to report back after I cut the grass a few times. 1 Share this post Link to post Share on other sites
