Pullstart 62,797 #1 Posted June 16, 2020 Here’s my turn to point out a silly mistake. On I’ve NEVER done before (sarcasm alert!)... Forgot the nut before the double flare! 8 Share this post Link to post Share on other sites
WHX?? 48,788 #2 Posted June 16, 2020 Stupid is as stupid does ... 4 Share this post Link to post Share on other sites
Pullstart 62,797 #3 Posted June 16, 2020 I was just looking at that nub too... I guess I have done it before! 1 3 2 Share this post Link to post Share on other sites
The Tuul Crib 7,336 #4 Posted June 16, 2020 Kevin I think we're allowed a mistake every now and then but if it keeps happening then they're definitely is a problem.😳😳😳 6 Share this post Link to post Share on other sites
JAinVA 4,619 #5 Posted June 16, 2020 Kev, If you spent all your time typing on a keyboard that kinda thing would never have happened.That oops is your reward for doing something and proof that you are mortal.Keep trying as it is fun to watch.Just kidding,luck,JAinVA 2 1 2 Share this post Link to post Share on other sites
Tractorhead 9,064 #6 Posted June 16, 2020 That‘s the reason while i hate it to work in a hurry or start several things the same timeline. This is a nearly guarantee such things can happen, but you just have to cut few mm to redo. 4 Share this post Link to post Share on other sites
Stormin 9,981 #7 Posted June 16, 2020 Man who never made a mistake, never made anything. 5 2 Share this post Link to post Share on other sites
ebinmaine 67,279 #8 Posted June 16, 2020 I tell people I haven't perfected making mistakes so I try everyday 2 1 3 1 Share this post Link to post Share on other sites
midpack 862 #9 Posted June 16, 2020 I've done a bit of brake line double flares (vintage Mustang, kids cars...) I picked up an "Inline Flaring" tool and can't believe how much easier/professional looking the flares came out! On my Daughters car I had limited space to work in, no problem it was around $20 and well worth every cent! 1 1 Share this post Link to post Share on other sites
Pullstart 62,797 #11 Posted June 16, 2020 51 minutes ago, TractorJunkie said: I don’t get what you are saying? Share this post Link to post Share on other sites
953 nut 55,083 #12 Posted June 16, 2020 He who has never made a mistake has never made an attempt! 2 Share this post Link to post Share on other sites
Pullstart 62,797 #13 Posted June 16, 2020 7 hours ago, Tractorhead said: That‘s the reason while i hate it to work in a hurry . or tired... Ran that dozer 10.5 hours yesterday, then that. It’s fixed now, so I can fill up that machine 1 Share this post Link to post Share on other sites
JoeM 7,871 #14 Posted June 16, 2020 15 minutes ago, pullstart said: saying? Just saying, I don’t think they remind you in the instructions to put that nut on, I remember one time bending a tube, wanting to get one more job done, it had a double Z configuration. Ran into 3 problems, nut was on the other side of the Z, two the last bent went left not right, three didn’t have another one, I think I may still have that trophy. 1 2 Share this post Link to post Share on other sites
ebinmaine 67,279 #15 Posted June 16, 2020 15 minutes ago, TractorJunkie said: trophy Share this post Link to post Share on other sites
WHX?? 48,788 #16 Posted June 16, 2020 I usually just leave the nut off on purpose the first flare. Have that screw up over and done with right off! 4 Share this post Link to post Share on other sites
Pullstart 62,797 #17 Posted June 16, 2020 1 hour ago, WHX24 said: I usually just leave the nut off on purpose the first flare. Have that screw up over and done with right off! wise man once said... 12 hours ago, WHX24 said: Stupid is as stupid does ... 2 Share this post Link to post Share on other sites
Stormin 9,981 #18 Posted June 16, 2020 (edited) Had an oops! today mesel'. Changing engine oil and filter, plus fuel filter on one of the farm tractors. Warmed it up then removed the sump drain plug. While it was draining removed the oil filter above it. I knew there was a tool for removing filters, but during lockdown my farmer friend had tidied the workshop up and some things had a new storage place.. Couldn't find the tool so used the well known method of a screwdriver through the filter and removed the filter. Thought it was strange that the oil in it was clean. Then the penny dropped. It was the hydraulic oil filter. The engine oil filter was on the other side and I didn't have a hydraulic filter. One was quickly sent for. Edited June 16, 2020 by Stormin 1 4 Share this post Link to post Share on other sites
JoeM 7,871 #19 Posted June 18, 2020 found that tube trophy, I did use one end for another job. 2 Share this post Link to post Share on other sites
Pullstart 62,797 #20 Posted June 18, 2020 Here’s the day’s “Doh!” Moment... My old two row disc sheared some bolts. 1 Share this post Link to post Share on other sites
