Jump to content
fitchboys

Toro 265H Hydro issues

Recommended Posts

fitchboys

I had my Toro 265H tilted up to do some engine mount replacements.  When put back down, have very little motion forward or back.  Been doing a lot of research and most likely have air in the system.  trans says not serviceable, but I don't believe it.  What's the fastest way to restore full motion forward and backward?  I've had smaller units behave the same, and all I did was keep running them forward and back and around turns until the unit came back to life.  This Toro is coming back very slowly and seems to have reached a limit.  Very slow and no go up any kind of incline.   Any ideas out there for me to try..??

Share this post


Link to post
Share on other sites
 
fitchboys
On 6/2/2020 at 11:02 AM, fitchboys said:

I had my Toro 265H tilted up to do some engine mount replacements.  When put back down, have very little motion forward or back.  Been doing a lot of research and most likely have air in the system.  trans says not serviceable, but I don't believe it.  What's the fastest way to restore full motion forward and backward?  I've had smaller units behave the same, and all I did was keep running them forward and back and around turns until the unit came back to life.  This Toro is coming back very slowly and seems to have reached a limit.  Very slow and no go up any kind of incline.   Any ideas out there for me to try..??

 

On 6/2/2020 at 11:02 AM, fitchboys said:

I had my Toro 265H tilted up to do some engine mount replacements.  When put back down, have very little motion forward or back.  Been doing a lot of research and most likely have air in the system.  trans says not serviceable, but I don't believe it.  What's the fastest way to restore full motion forward and backward?  I've had smaller units behave the same, and all I did was keep running them forward and back and around turns until the unit came back to life.  This Toro is coming back very slowly and seems to have reached a limit.  Very slow and no go up any kind of incline.   Any ideas out there for me to try..??

 

Share this post


Link to post
Share on other sites
 
gwest_ca

Service manual help?

Garry

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...