RobHobbs 1 #1 Posted May 25, 2020 (edited) I can’t get the blades off of my 48in deck. 78363. The nuts are frozen, wd40 didn’t help Edited May 25, 2020 by RobHobbs Wanted to set the automatic notification Share this post Link to post Share on other sites
Adams94 1,068 #2 Posted May 25, 2020 Impact and wedge the blade up against a board 2 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #3 Posted May 25, 2020 The torque spec on those nuts is 80-100 ft/lb when installing and it takes more torque to break them loose. That is 80-100 lbs on a wrench 12 inches long. I use a 30" bar and socket. A good application for Never-seize so they are easier next time. Garry 3 Share this post Link to post Share on other sites
skrusins 128 #4 Posted May 26, 2020 If you don't have any luck with these suggestions.Take to a service station and they will use a impact wench. Share this post Link to post Share on other sites
