Is this in or out??

[stevasaurus 22,710]

Check out this picture to see if you need a wrench or a socket.  Optical illusion for sure.  See if you can see it both ways.  One on the left.

 

[squonk 41,030]

I think it's an outie. 

[Racinbob 11,045]

I've got to go the other way and say innie and an allen wrench is in order.  But I can see it both ways. lo

Edited May 16, 2020 by Racinbob

[gwest_ca-(File Mod) 11,033]

If the right one is in the left one is out.

 

Garry

[The Tuul Crib 7,336]

🤪🤪

[Lane Ranger 10,946]

I see it as a problem! 

[953 nut 55,083]

1 hour ago, squonk said:

I think it's an outie. 

        I'm with Mike on this one.

[Shynon 7,459]

Now that would depend on how much Rock n Rye you had. I'm saying innie. Changed my mind after further review. 

Edited May 16, 2020 by Shynon

[CCW 1,292]

Look at the shadow lines.  Lower side is has a shadow line along the inner edge and the upper side does not.  It's an innie.

[WHX?? 48,788]

It's got depth....innie.... care to give use any tips at to what it is??? Hydro of sorts with a patina???

[adsm08 2,022]

I say it's in, but whatever it is I'll bet a left hand drill bit takes it out.

[Racinbob 11,045]

Steve, do you mean the one on the left in the picture but it was right on the tractor? A wrench or socket won't work on the right one in the picture.  I stand by my innie 

[squonk 41,030]

IT'S AN OUTIE!  

 

 

 

Edited May 17, 2020 by squonk

[stevasaurus 22,710]

This ends up being an amazing thread.  The starter thread is in Transmissions.  It did end up being an outie.  

[Goldnboy 910]

On 5/16/2020 at 6:23 PM, WHX24 said:

It's got depth....innie.... care to give use any tips at to what it is??? Hydro of sorts with a patina???

Eaton 1100 from GT1848