K91 Wrench 5 #1 Posted May 6, 2020 I have a Suburban 400 that is not running. Bought it on impulse for almost nothing years ago, but never got around to getting it running. Since I have had some time on my hands, I've been working to get it going again. I took the cylinder head off, and found a stuck exhaust valve. (Happy it was nothing worse) I think I got it freed up. So the engine seems like it will run again, but the tractor is missing some parts. Sheet metal like the belt guard, and also the shrouds around the engine. 1 2 Share this post Link to post Share on other sites
stevasaurus 22,707 #3 Posted May 6, 2020 Welcome to Red Square Want some pictures of that. That missing belt guard acts like a clutch. It funnels the belt drive slack toward the engine pulley so the input shaft on the transmission comes to a stop. Without one, you will grind the gears in the trans. 3 Share this post Link to post Share on other sites
WHX?? 48,771 #4 Posted May 6, 2020 The belt guard someone was repoping & the engine tins some guys may have. Yes 1 Share this post Link to post Share on other sites
Lane Ranger 10,945 #5 Posted May 6, 2020 Joe Papke sells the remake rj and suburban belt guards. you can contact him at horsedr2004@yahoo.com He knows more about the early. Wheel Horses then almost anyone I know! Yes 3 3 Share this post Link to post Share on other sites
Achto 27,502 #7 Posted May 6, 2020 Please show us some pictures of your Suburban. When you know what parts you will need, place a post in our wanted section. 1 1 Share this post Link to post Share on other sites
K91 Wrench 5 #10 Posted May 7, 2020 On 5/6/2020 at 1:39 PM, Lane Ranger said: Joe Papke sells the remake rj and suburban belt guards. you can contact him at horsedr2004@yahoo.com He knows more about the early. Wheel Horses then almost anyone I know! Yes Excellent! Thank you. 1 Share this post Link to post Share on other sites
