What did you do today?

[peter lena 8,627]

@pullstart  good for you , use it in your most problem area , and make things work easier , like i said , bearings love this stuff , all my linkages and swing points work seamlessly. mower deck bearings , pto bearings , plow steering quadrant area , swings like power steering . i buy bearings with wide rubber side shields , so its easy to pop them off and do a grease swap with lucas , bearings love it , hope you try it , pete   

[19richie66 17,508]

2 hours ago, lynnmor said:

 

I never knew they were that docile, maybe the young ones have a better attitude.

He hasn’t posted the photo yet without a left ear 😁 

[ebinmaine 67,496]

49 minutes ago, 19richie66 said:

He hasn’t posted the photo yet without a left ear 😁 

That explains what happened to Picasso..

[Handy Don 12,225]

2 hours ago, 19richie66 said:

He hasn’t posted the photo yet without a left ear 😁 

Too right! Try that move with an adult swan and you'd better have serious protective clothing.

[ebinmaine 67,496]

Maybe Mick's a swan whisperer...

[Pullstart 62,870]

I’m not a big fan of swans.  Growing up on the lake, the males saw PWCs of all types as other males intruding on their lake.  I’ve had plenty of rides with a 55mph flying bird winging me on both sides.  They are protected, so we just had to get to shore and tuck and roll into the beach more times than I care to admit.  We ended up on year obtaining a paper it from the DNR to capture it.  It was in our garage in a special DNR cage for the night and they came to pick it up in the morning.

Edited September 14, 2021 by pullstart
Auto correct

[8ntruck 7,004]

I worked on the tiller carb this afternoon.  It is running better now, but it is still surging.  At least it will run with no choke now.  Ran it under load long enough that I will get a good read on the plug.  It won't idle either.  

 

Seems to run steadly when I hold the throttle linkage.  Might as well research how to set a governor on a B&S Intek engine.  Not sure what I will find, as the governor linkage looks good and operates freely.  An oil change won't hurt, either.

Edited September 16, 2021 by 8ntruck

[ebinmaine 67,496]

21 minutes ago, 8ntruck said:

running better now, but it is still surging.  At least it will run with no choke now.  Ran it under load long enough that I will get a good read on the plug.  It won't idle either

You're clearly headed the right direction. 

Did you change the fuel line too?

Our splitter runs a similar (if not same) engine. 

I did have to soak my carb for a few days to get into the tiny ports effectively. 

 

If you're not in possession of a soak kit I've found dedicating 2 to 3 full cans of brake clean to spray in every orifice every direction to be a decent alternative. 

[Wheel Horse 3D 3,795]

For those following along on the GT 14 dash project, while the 3d models are done, I'm still working on lining out the printer. Now I'm into reviewing and customizing my own firmware version for the large printer..line after line of C++ code, then test, then tweak, and test again. This ONE file has ONLY  2889 lines of code. Scary when it starts to make sense, kinda like interpreting the Matrix.

Edited September 16, 2021 by Wheel Horse 3D

[Mickwhitt 4,624]

Been doing a lot of litter picking lately, keeping the area tidy.

I broke a pair of litter tongs so decided to have a bash at making one.

Its turned into a bit of an epic build to be honest. 

The next step will be hydraulic power lol.

[Handy Don 12,225]

2 minutes ago, Mickwhitt said:

The next step will be hydraulic power lol

Go all the way to a laser and you can just blast the stuff into oblivion.

[19richie66 17,508]

A little more on my cup. Just needs epoxy and it’s done. @WHX?? check your messages. I need some info 

Edited September 17, 2021 by 19richie66

[Gregor 4,846]

Not today, but in the morning.

"East bound and down, loaded up and truckin' "

Antique tractor and equipment show about an hour east of me tomorrow morning. First show I have ever been to out of town.

[ebinmaine 67,496]

4 minutes ago, Gregor said:

Not today, but in the morning.

"East bound and down, loaded up and truckin' "

Antique tractor and equipment show about an hour east of me tomorrow morning. First show I have ever been to out of town.

Leave em loaded up and head to Maine in November. 

 

 

[WHX?? 48,815]

Not now @19richie66.... old lady is lookin over my shoulder ... 'sposed to be a surprise .....says she wants to see red porn but more over the  tractors I just scored.... not to mind  the cups....

Edited September 18, 2021 by WHX??

[Gregor 4,846]

7 hours ago, ebinmaine said:

Leave em loaded up and head to Maine in November. 

 

Isn't it just a tad chilly in Maine in November?

[ebinmaine 67,496]

2 hours ago, Gregor said:

Isn't it just a tad chilly in Maine in November?

Depends on your outlook of chilly. I prefer cooler weather so fall is my favorite time of year. 

Average daily highs and lows for Fryeburg Maine (closest weather reporting airport) are about 50 and 30 for November 13th. 

Last year we went to the Great North Woods the first weekend of November. It didn't go above freezing for 3 days. The very next weekend it was nearly 70. 

[JPWH 6,033]

I recently bought a bunch of metal at an estate sale but my metal rack did not have enough tubes to organize it so I added some tubes and some uprights at the bottom for small sheet goods.

Metal loaded onto rack.

Edited September 20, 2021 by JPWH

[adsm08 2,057]

I bought a Horse cousin for $100.

 

 

Speedex S17.

Edited September 18, 2021 by adsm08

[ebinmaine 67,496]

Quite a productive day. 

We took the 5 x 8 utility trailer loaded with all manner of recycling, refuse, metal, and a fair pile of broken shingles (from the roof installation last April and May) to the transfer station. 

On the way back we stopped and picked up a few tools and some pegboard along with a trailer load of firewood from the widow downstreet we've been helping out. 

Got back and unloaded that. 

 

The BBT and her constant energy kept going and her mom came over to help. They moved a dozen or so 5 to 6 cubic foot loads of gravel from the 14 yard pile in the front down to the back of the house. 

 

We're filling in some of the holes and rough spots so we'll able to use that area for walking around and drive the tractors on it. 

I'll get video of that project sometime. It's part of the clearing project we've been working on for a good 2 years now. 

 

Ater all that we took about 3-1/2 hours to do a fairly decent detail cleaning on the Kia. 

I've been mulling over trading it in. We'll see what a couple dealers are willing to offer and go from there. 

 

Now it's time to set a spell and enjoy a nice adult beverage.  

 

[RandyLittrell 3,877]

23 minutes ago, ebinmaine said:

We'll see what a couple dealers are willing to offer and go from there. 

 

You will get damn good money for it right now, it's buying the next one that's gonna hurt!! 

 

Prices are crazy in my area, maybe your's will be better. 

 

 

Randy

[RandyLittrell 3,877]

Played with the Grandkids in the portable sandbox today, great day!!! 

 

 

Randy

[ebinmaine 67,496]

4 minutes ago, RandyLittrell said:

 

You will get damn good money for it right now, it's buying the next one that's gonna hurt!! 

 

Prices are crazy in my area, maybe your's will be better. 

 

 

Randy

 

They're up a little but not as much as other areas. 

 

Living in the sticks like we do and having a long commute takes its toll on vehicles. 

I average 25K miles a year. 

Been buying used with fair miles for a long time. 

They are worn right out by the time I get another in a few years. 

 

This time I'll get new or near new and it should be in better condition and more saleable at trade-in time. 

 

 

[RandyLittrell 3,877]

3 minutes ago, ebinmaine said:

 

They're up a little but not as much as other areas. 

 

Living in the sticks like we do and having a long commute takes its toll on vehicles. 

I average 25K miles a year. 

Been buying used with fair miles for a long time. 

They are worn right out by the time I get another in a few years. 

 

This time I'll get new or near new and it should be in better condition and more saleable at trade-in time. 

 

 

 

 

My last job was at a Chevy dealership and the owner has 8 locations including a Kia dealership. Most of the money he makes is in repairs and parts, not selling the vehicles. He found out in his research that Kia's don't break down as much so he put a carwash and quicklube in that location to bring revenue up. 

 

Randy

[ebinmaine 67,496]

6 minutes ago, RandyLittrell said:

 

 

My last job was at a Chevy dealership and the owner has 8 locations including a Kia dealership. Most of the money he makes is in repairs and parts, not selling the vehicles. He found out in his research that Kia's don't break down as much so he put a carwash and quicklube in that location to bring revenue up. 

 

Randy

 

I can believe that. I'll be looking for a small hatch back. Toyota, Hyundai, or Kia.