ohiofarmer 3,276 #2651 Posted July 23, 2021 1 hour ago, D_Mac said: Went to an Estate Sale this morning. Walked out with this beauty. I have always made out pretty well turning them over. I already removed some paint splatter that was all over it. Cleaned it inside and out. Waxed it all up. Came out pretty good with not so much effort. I should do well with it. They are still making these chests and still family owned. Right down the road at 25 miles away 2 Share this post Link to post Share on other sites
tom2p 2,394 #2652 Posted July 23, 2021 (edited) 38 minutes ago, D_Mac said: Last one I got was loaded with tools. This one had stuff in it but mostly junk. He worked at Kodak here. Kodak was huge here in its day, not so much anymore. Has some spots towards the bottom. Not sure what it is, looks worse in the pictures then in person. I think the packing and shipping would kill any type of deal I gave you on the chest. I had a pedal car packed and shipped to Tennessee once and it was 350 bucks. This is a big, heavy chest. another nice find - you've been in a roll ! did not know you were in Rochester - was there around 2013 (?) ... my oldest kid almost went to Eastman School of Music in Rochester Edited July 23, 2021 by tom2p 1 Share this post Link to post Share on other sites
tom2p 2,394 #2653 Posted July 23, 2021 (edited) 31 minutes ago, ohiofarmer said: They are still making these chests and still family owned. Right down the road at 25 miles away oh farmer - my youngest kid goes to school close to you ... UD ! UD visit in 2017 Edited July 23, 2021 by tom2p Share this post Link to post Share on other sites
Mickwhitt 4,642 #2654 Posted July 23, 2021 This is the mower blade sharpener I picked up today. The grinding head runs on bearings sat over round bars so its pretty free running. Its very robust made of cast iron so it was well worth the £85 it cost me. its a manual machine so no leaving it to do its work, but it will sharpen cylinders and maybe bottom blades with a bit of head scratching. 3 3 1 Share this post Link to post Share on other sites
Gregor 4,846 #2655 Posted July 23, 2021 Not today, but yesterday. Got a package in the mail. Wheel Horse Collector Club jacket, and sweat shirt. My wife was impressed by both. When it comes to clothes, she is not easily impressed. Wheel Horse hat on order. 2 Share this post Link to post Share on other sites
ohiofarmer 3,276 #2656 Posted July 23, 2021 3 hours ago, tom2p said: oh farmer - my youngest kid goes to school close to you ... UD ! UD visit in 2017 Good lookin' kid going to a great school. UD Flyers have been playing above their weight before Covid hit. If he ever needs anything like solving a logistics problem that you are too far away from, I will do what i can. 2 1 Share this post Link to post Share on other sites
ohiofarmer 3,276 #2657 Posted July 24, 2021 15 hours ago, SylvanLakeWH said: New driveway, sidewalk and porch cap done! Cure time now for 7 days before I park on it… Broom finish, fiber mesh, six sack concrete for those interested in the details… exactly 30 yards. My “inspector” made sure the damage to the bamboo was limited… Hmmmmmmm That house looks strangely familiar........Just a lovely little enclave of houses very nicely kept 2 1 1 Share this post Link to post Share on other sites
Jeff-C175 7,202 #2658 Posted July 24, 2021 (edited) Just got back from the recycler... more cleaning out the garages. Came home with $492.00 today. $172.00 last weekend. Copper is way up, $3.25 / lb for #1, $2.95 for #2. Brass is at $1.70 Electric motors... had 287 pounds of those! Left over up in the rafters from my FILs heating cooling business back in the 60s. 20 cents a pound for those. I'll take it! Not bad pay for cleaning out the junk in the garages! Edited July 24, 2021 by Jeff-C175 5 3 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #2659 Posted July 24, 2021 Lets see..its a Saturday morning and tons of stuff to do at home...any guess what WH3D might be doing on a Saturday morning? 2 Share this post Link to post Share on other sites
formariz 11,987 #2660 Posted July 24, 2021 Delivering the two beauties to their final destination. 3 5 Share this post Link to post Share on other sites
Jeff-C175 7,202 #2661 Posted July 24, 2021 51 minutes ago, Wheel Horse 3D said: any guess what WH3D might be doing on a Saturday morning? Drinking beer? I got some jingle in my pocket, I'll buy the next round! 1 1 Share this post Link to post Share on other sites
Mickwhitt 4,642 #2662 Posted July 24, 2021 Got the blade grinder out the car and in the workshop this morning. Bit of a clean up and the sliders work well. I'll clean the blade holders tomorrow and see if I can mount a blade in them. No idea how to set it up yet but I'm sure I will work it out. Mick 4 Share this post Link to post Share on other sites
Mickwhitt 4,642 #2663 Posted July 24, 2021 Oh dear. It seems blade grinder are like busses, they come along in sets. I managed to buy another one today! Got to collect it in the week. Its a spin grinder, automatic so different to the one I have now. Looks like I'm going to be doing some learning lol 3 1 1 Share this post Link to post Share on other sites
Stormin 9,981 #2664 Posted July 24, 2021 Sounds as though you could well be in for some ear'ole bashing. 3 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #2665 Posted July 24, 2021 6 hours ago, Jeff-C175 said: Drinking beer? I got some jingle in my pocket, I'll buy the next round! I wish! Almost every Saturday morning is spent loading someone else's trash that they left in a storage unit just to clear it for someone else to leave their trash in it later....whats the definition of insanity again??? 1 1 Share this post Link to post Share on other sites
Jeff-C175 7,202 #2666 Posted July 25, 2021 1 hour ago, Wheel Horse 3D said: whats the definition of insanity again?? Let me Google that... QRX one... HEY! Why do all the hits have my picture on them???!!! 2 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #2667 Posted July 25, 2021 Last night finished repair and realignment of my trusty printer..now running orders again..looks like Ill still get them out on schedule, even though im usually a week ahead. Printed a couple dial indicator holders for the machines to simplify bed leveling Todays mission...pvc stand for Otter's bunny cage and litter box! 1 Share this post Link to post Share on other sites
Horse Newbie 7,075 #2668 Posted July 25, 2021 11 minutes ago, Wheel Horse 3D said: Printed a couple dial indicator holders for the machines to simplify bed leveling My goodness !... Who would use them ?...lol... Sheldon ? By golly I want all my grass blades the same height !...break out the nuclear powered grade stick and transit ! 1 Share this post Link to post Share on other sites
Stormin 9,981 #2669 Posted July 25, 2021 (edited) This morning, pressure washed, then wire brushed the peeling paint off the decking retaining wall, above the pond. Later gave it a sealing coat of PVA glue. Tomorrow morning it'll get a coat of paint. Edited July 25, 2021 by Stormin 2 1 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #2670 Posted July 25, 2021 1 hour ago, Horse Newbie said: My goodness !... Who would use them ?...lol... Sheldon ? By golly I want all my grass blades the same height !...break out the nuclear powered grade stick and transit ! Lol for the 3D printing machines not the mowing machines!! 1 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #2671 Posted July 25, 2021 Opted for easy to clean pvc, still looking for an appropriately sized under tray. 2 Share this post Link to post Share on other sites
adsm08 2,069 #2672 Posted July 25, 2021 Today I helped my dad get his pressure washer unstuck. From his roof. 5 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #2673 Posted July 25, 2021 A quick reapplication of my old patina protectant of choice today...necessary after I was caught out mowing during a recent midday downpour. 2 4 1 Share this post Link to post Share on other sites
Horse Newbie 7,075 #2674 Posted July 26, 2021 8 hours ago, Wheel Horse 3D said: simplify bed leveling @Wheel Horse 3D...somehow I read "deck" leveling instead of bed leveling... Thanks for seeing my humor...after I reread everything I was like "doh" ! 1 Share this post Link to post Share on other sites
Gregor 4,846 #2675 Posted July 26, 2021 I did a lot of things today, from getting the 341 running, and the MV 16 up on my test stand, to hanging a swing for my wife. I have very few days where all the stars seem to align, and everything goes as planned. In short, it was a good, but very long, day. 1 1 Share this post Link to post Share on other sites
