OldWorkHorse 3,045 #2201 Posted May 25, 2021 @pullstart 1 Share this post Link to post Share on other sites
The Tuul Crib 7,336 #2202 Posted May 25, 2021 (edited) @pullstart ill be around Kevin! When you come thru give me a shout! Do l need to lock up the horses? Stop by Pioneer Coach to say hello and ill give you a 50 cent tour!! Edited May 25, 2021 by The Tuul Crib Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #2203 Posted May 25, 2021 (edited) @pullstart What an adventure! Makes my past weekend look like a trip to the mailbox! Attached pic for reference...even if Denali and I went all Calvin and Hobbes .....not much goin on there! Edited May 25, 2021 by Wheel Horse 3D 4 Share this post Link to post Share on other sites
Pullstart 62,878 #2204 Posted May 25, 2021 8 hours ago, The Tuul Crib said: Stop by Pioneer Coach to say hello and ill give you a 50 cent tour!! As much as we’d love to stop by, we are so far behind schedule! It looks like you’re a stone’s throw from Hendersonville too! My glasses are breaking and Mrs. P’s cousin is an optometrist down here. We’re about 100 miles SE on 24 now and have sat in traffic jams about an hour and a half so far today. 1 Share this post Link to post Share on other sites
Mickwhitt 4,624 #2205 Posted May 25, 2021 Spent the afternoon stripping cleaning and refitting the carb on my new Honda wheeled strimmer. Still not running right but I'm sure its just a carb issue. The gasket placement is pretty critical and very fiddly. I will make some headless studs to make it a bit easier. Its the same engine as on my mower which runs fine so I can compare the two set ups to make sure the PO hadnt fitted things wrong. Mick 4 Share this post Link to post Share on other sites
Handy Don 12,227 #2206 Posted May 25, 2021 2 hours ago, pullstart said: have sat in traffic jams about an hour and a half so far today Just wait until this weekend! I am expecting TOTAL highway madness. 1 1 Share this post Link to post Share on other sites
ebinmaine 67,498 #2207 Posted May 25, 2021 2 minutes ago, Handy Don said: Just wait until this weekend! I am expecting TOTAL highway madness. I'm expecting TOTAL STAY HOME. 2 1 2 Share this post Link to post Share on other sites
Handy Don 12,227 #2208 Posted May 25, 2021 1 minute ago, ebinmaine said: I'm expecting TOTAL STAY HOME. That was my plan until yesterday. Then we got an invite to be with all four grandchildren (and, oh yeah, their parents). Leaving at 0530 on Friday morning and not comin' back 'til Monday midday! Fingers crossed. 3 Share this post Link to post Share on other sites
ebinmaine 67,498 #2209 Posted May 25, 2021 Just now, Handy Don said: That was my plan until yesterday. Then we got an invite to be with all four grandchildren (and, oh yeah, their parents). Leaving at 0530 on Friday morning and not comin' back 'til Monday midday! Fingers crossed. Hopefully those departure and arrival times will work out to your benefit Share this post Link to post Share on other sites
The Tuul Crib 7,336 #2210 Posted May 25, 2021 3 hours ago, pullstart said: As much as we’d love to stop by, we are so far behind schedule! It looks like you’re a stone’s throw from Hendersonville too! My glasses are breaking and Mrs. P’s cousin is an optometrist down here. We’re about 100 miles SE on 24 now and have sat in traffic jams about an hour and a half so far today. 20 min to H'ville! on a good day! Be safe, maybe next time! N' ville traffic is not any better Share this post Link to post Share on other sites
Jeff-C175 7,202 #2211 Posted May 26, 2021 Second sash and frame ready for caulk and trim; I found some OLD 14' long 1x4 lumber in my stash. Going to repurpose that into the casings. This is OLD because it's not actual 3/4 x 3-1/2, it measures 7/8 x 3-5/8 ! 3 3 Share this post Link to post Share on other sites
ebinmaine 67,498 #2212 Posted May 26, 2021 (edited) Trina's decided to resurface out back of the house in the area we call the "fire circle". It's a 26 foot diameter circle of 3/4" crushed stone with an antique truck rim in the center as our fire holder. That rim is surrounded by stones as is many things here. The Yard Decorations Department who also functions as our local stone setting expert will be laying in 12 x 12 x 2 cement pavers. Some gray, some red. Should be an interesting change of scenery but also the chairs will actually sit on top of the cement instead of sinking into the 3/4" stone. She figures it will take around 250 blocks to do what she wants done. The first 40 came home in her little Honda Fit this evening. We used Cinnamon Horse and the 17 cube Agri fab trailer to move a little over half of them from the upper driveway to the backyard. Edited May 26, 2021 by ebinmaine 5 4 Share this post Link to post Share on other sites
Jeff-C175 7,202 #2213 Posted May 27, 2021 4 hours ago, ebinmaine said: first 40 came home in her little Honda Fit this evening No pics of the Fit with the springs bottomed out? 😋 Sounds like it's gonna be awesome! 1 Share this post Link to post Share on other sites
ebinmaine 67,498 #2214 Posted May 27, 2021 5 hours ago, Jeff-C175 said: No pics of the Fit with the springs bottomed out? 😋 Sounds like it's gonna be awesome! Oh no. It did quite well. Vehicle load capacity is 850 lbs. Blocks weighed about 680. The rear seats fold up out of the way so you can load the floor. She spread the weight right out to keep it even. 1 1 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #2215 Posted May 27, 2021 (edited) @ebinmaine that is gonna look awesome! Edited May 27, 2021 by OldWorkHorse 1 Share this post Link to post Share on other sites
ebinmaine 67,498 #2216 Posted May 27, 2021 3 minutes ago, OldWorkHorse said: @ebinmaine that is gonna look awesome! I suspect by the time you show up in 36 hours she'll have already begun... In one of those pictures you can see the bottom portion of the large wood crate that used to be on the right. I'm going to slice that up and make two benches out of it for extra seating. We will likely have a little fire out there to continue burning up some of that scrap wood. Share this post Link to post Share on other sites
OldWorkHorse 3,045 #2217 Posted May 27, 2021 59 minutes ago, ebinmaine said: I suspect by the time you show up in 36 hours she'll have already begun... Heck yeah can't wait to come over and enjoy it! 1 1 Share this post Link to post Share on other sites
Andy N. 2,154 #2218 Posted May 28, 2021 Today I decided to catch up on my Red Square reading at work while ops checking the HDMI connections. IMG_0626.mp4 4 6 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #2219 Posted May 28, 2021 Well..other than letting the smoke out of Dug, I've been worrying the heck out of some printer issues in my brain, and tryin all kinds of stuff. For some reason, the new printer keeps dragging the nozzle, if i babysit and manually adjust height itll come out ok, but it needs to just go. Ill figure it out eventually, but my tests show eveything within tolerance...grrrrr. 3 Share this post Link to post Share on other sites
Dan.gerous 2,696 #2220 Posted May 28, 2021 Been a crazy few days. Lost all power to the electric fences while we were away (very mysterious and I suspect foul play). Our poor stockman ended up with half the fences destroyed and pigs wandering about wherever they felt like. After trying my best to problem solve over the phone we decided to cut our holiday short and head back on an 8 hour drive to help sort the problem out. A bunch of "experts" had been helping and I came home to some mess, with feed wires everywhere, money spent on new energisers that we dont need etc. Quickly found the actual problem after arriving home at 10pm and going for a wander - main wires disconnected from the fence in a location that only myself and one other person (ex employee) know about, and they had to be unbolted with a spanner... Anyway, we set about trying to get the fences back together, which is no mean feat when the pigs are destroying them as quickly as you fix them. Eventually we got to a point where we had enough fences repaired to put a half decent amount of power through them, which stopped the majority of the pigs trying it on. Its now day three and I just have 27 pens left to repair and the place is back to its calm and tranquil normality! phew - some way to end a weeks holiday! Its been quite fortuitous in one way as the whole system is a shambles anyway, its been on my list of things to completely revamp and this has now pushed it to top priority. Have started simplifing and improving it, already have more voltage on the fence than has ever been seen before - once all the work is finished we will have a much simpler system that will be easy to diagnose faults on. Currently its been added to and added to over the past 10 years without any thought, and about 50% of the wires about the place are no longer used, which makes it incredibly confusing to try and sort things out. So today will be fences, fences, fences. We are also installing security cameras, its no coincidence that the one time the farm is left unoccupied that mysterious faults start happening - and one of our staff left in a bad mood a few weeks ago (he was an awful grumpy old bastard anyway). Shame I don't have any proof or I would be down at the police station making a complaint, but we live and learn from these experiences. Here is hoping for a quiet weekend watching MotoGP and WSBK racing - might even cast an eye on the Indy 500 if time permits. 6 Share this post Link to post Share on other sites
Maxwell-8 4,275 #2221 Posted May 28, 2021 10 hours ago, Andy N. said: Today I decided to catch up on my Red Square reading at work while ops checking the HDMI connections. First picture, Me: great, watching redsquare on TV Second picture/video: dahm that is a loud RTV? very nice interior tho. Third picture: dahm it's a freaking private jet. 2 2 Share this post Link to post Share on other sites
OutdoorEnvy 1,522 #2222 Posted May 28, 2021 Well I found the weakness to the Lawnboy Gold Series 2 cycle mowers of the 90's...it's the plastic starter rope guide... The starter rope has eaten it's way through the plastic. Ordered a metal replacement one and it worked out great. Part number is Lawnboy/Toro 86-9671 if anyone else needs it. original plastic compared to metal replacement. You can use the same nylon nut from original with the new metal one. Now she's ready to role! 4 1 Share this post Link to post Share on other sites
Stormin 9,981 #2223 Posted May 28, 2021 (edited) Been to help my mate Dunc load up his trailer with things from his old workshop, to go up to his new one in Scotland. Turning into the single track lane that leads home, also to a local farm Tea Room, it was evident it was the start of the May Bank Holiday. Lock down restrictions are starting to be relaxed. Tea Room has reopened. Car coming towards me and taking it's time. Not local. Tea Room customer. Pulled in to let it past then just as I started to move, another appeared making it's leisurely down. Let that pass and $h**, yet another. Ten minutes to drive 3/4s of a mile. Now all three cars had past gateways, where they could have pulled in. But no, they're not going to chance getting dirty tyres. This will be a regular occurrence all summer now. Edited May 28, 2021 by Stormin 1 4 Share this post Link to post Share on other sites
ebinmaine 67,498 #2224 Posted May 28, 2021 @Stormin That's when it comes in handy to have a VERY large vehicle or something like an old farm tractor for transportation. 2 Share this post Link to post Share on other sites
Stormin 9,981 #2225 Posted May 28, 2021 44 minutes ago, ebinmaine said: @Stormin That's when it comes in handy to have a VERY large vehicle or something like an old farm tractor for transportation. Don't bet on it. Some years ago when I had my digger, I was towing it on the trailer home, when some rectum coming the opposite way kept on coming. The grass verge is about 2ft then a ditch both sides of the lane. No way I could possibly pull over. I stopped and he stopped. We looked at each other and he then signalled me to reverse. I got out and politely asked, honestly, if he was joking. He said you reverse. I got back in the Land Rover, rolled a smoke, put my feet up on the dash. Took him 5 minutes of his wife giving him earache before he reversed to the nearest gateway. 1 1 5 Share this post Link to post Share on other sites