Mickwhitt 4,642 #1551 Posted February 27, 2021 Yesterday... Fitted blade to a Husqvarna T-130 Repaired the switch on a Flymo Fitted a clothes airer rack Did a couple of hours toad patrol Quite a nice steady day. 2 Share this post Link to post Share on other sites
ebinmaine 67,627 #1552 Posted March 6, 2021 Just got done spending a couple hours dialing in the new sights I put on the .22 pellet rifle and the .22 rimfire. Had Trina doing most of the shooting so she could get more accustomed to both guns. We dialed them both in at a point less than 10 yards out because that's our normal usage range. We'll do some longer range plinking when the weather's a little warmer. 3 1 Share this post Link to post Share on other sites
DennisThornton 4,769 #1553 Posted March 6, 2021 57 minutes ago, ebinmaine said: Just got done spending a couple hours dialing in the new sights I put on the .22 pellet rifle and the .22 rimfire. Had Trina doing most of the shooting so she could get more accustomed to both guns. We dialed them both in at a point less than 10 yards out because that's our normal usage range. We'll do some longer range plinking when the weather's a little warmer. Something else we could spend time talking about... Need more time! 2 1 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,326 #1554 Posted March 7, 2021 Spent 3 hours cutting down saplings and low hanging branches. Tomorrow is clean up with the 416 pushing to the back of the property . 2 Share this post Link to post Share on other sites
haydendavid380 759 #1555 Posted March 7, 2021 Took a break from my usual weekend garage tinkering to head to the casino to play some poker with a couple of guys from work, followed by a couple hours of beer and appetizers down at the pub. First time I've been out to do that in quite a long time. 2 Share this post Link to post Share on other sites
cschannuth 3,816 #1556 Posted March 7, 2021 (edited) I added an additional shelf in my garage so that I can get organized and came across some Wheelhorse goodies I forgot about. Edited March 7, 2021 by cschannuth 3 1 Share this post Link to post Share on other sites
Horse Newbie 7,075 #1557 Posted March 7, 2021 8 hours ago, ebinmaine said: We dialed them both in at a point less than 10 yards out Why don't you just throw a rock, or shoot a spitball through a straw ? 3 Share this post Link to post Share on other sites
Tractorhead 9,064 #1558 Posted March 7, 2021 3 hours ago, Horse Newbie said: Why don't you just throw a rock, or shoot a spitball through a straw ? Slingshot, on that range 😎 2 Share this post Link to post Share on other sites
ebinmaine 67,627 #1559 Posted March 7, 2021 10 hours ago, Horse Newbie said: throw a rock I kid you not. Trina's done that and succeeded. 7 hours ago, Tractorhead said: Slingshot, on that range 😎 We've used those too but they aren't lethal. 2 Share this post Link to post Share on other sites
ebinmaine 67,627 #1560 Posted March 7, 2021 11 hours ago, cschannuth said: get organized and came across some Wheelhorse goodies I forgot about I love doing that. 😁 2 Share this post Link to post Share on other sites
Ed Kennell 38,227 #1561 Posted March 7, 2021 2 minutes ago, ebinmaine said: We've used those too but they aren't lethal. Ya think! 3 1 1 2 Share this post Link to post Share on other sites
ebinmaine 67,627 #1562 Posted March 7, 2021 7 minutes ago, Ed Kennell said: Ya think! Now HOLDONAMINITT!! THAT looks like a fun rig! 1 1 Share this post Link to post Share on other sites
Handy Don 12,237 #1563 Posted March 7, 2021 1 hour ago, Ed Kennell said: Ya think! So one deer says to the other "Hey, what's that red dot on your forehead?" 6 Share this post Link to post Share on other sites
Tractorhead 9,064 #1564 Posted March 7, 2021 1 hour ago, ebinmaine said: Now HOLDONAMINITT!! THAT looks like a fun rig! Not only looks like, it is.. 😎 2 Share this post Link to post Share on other sites
Pullstart 62,912 #1565 Posted March 8, 2021 (edited) Got the old filthy HOG out today. Took a 30 minute spin around the block. Feels good to have wind in my face! Edited March 8, 2021 by pullstart 1 1 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #1566 Posted March 8, 2021 (edited) Working on cooking a couple beef tenderloin roast with a red wine reduction sauce! Sometimes I have to stay out of the barn and hang out in my kitchen too! Edited March 8, 2021 by OldWorkHorse Update! Kids said it came out awesome! Score for Dad! 2 2 1 Share this post Link to post Share on other sites
ebinmaine 67,627 #1567 Posted March 8, 2021 1 minute ago, OldWorkHorse said: Working on cooking a couple beef tenderloin roast with a red wine reduction sauce! Sometimes I have to stay out of the barn and hang out in my kitchen too! Bring some over. I'll trade coffee for that. 3 1 1 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #1568 Posted March 8, 2021 2 minutes ago, ebinmaine said: Bring some over. I'll trade coffee for that. Oooo coffee! That's a great deal right there! Been craving that boild stuff here latly! Should have never shown me that haha 2 1 Share this post Link to post Share on other sites
ebinmaine 67,627 #1569 Posted March 8, 2021 4 minutes ago, OldWorkHorse said: Oooo coffee! That's a great deal right there! Been craving that boild stuff here latly! Should have never shown me that haha Get outta work Saturday and stop by. I'll make some up. Share this post Link to post Share on other sites
OldWorkHorse 3,045 #1570 Posted March 8, 2021 7 minutes ago, ebinmaine said: Get outta work Saturday and stop by. I'll make some up. I'm really going to try! 1 Share this post Link to post Share on other sites
Lee1977 6,667 #1571 Posted March 10, 2021 On 3/7/2021 at 8:52 AM, Ed Kennell said: Ya think! Ed here is a slingshot # 107 rubber band 7" x 5/8" you can stretch it out to 4 or 5 feet. 4 Share this post Link to post Share on other sites
ohiofarmer 3,276 #1572 Posted March 10, 2021 (edited) Did something changing tires today that qualifies as "Why didn't I think of this--SOONER" At some point a feller runs out of birthdays and i am very close to four score and nine. I am trading a junk car for a really nice ahrends snowblower and it was time to swap some tires from the junker car to the almost junker car. I was gonna take 4 mounted tires to the tire changer guy in town because i hate to demount them much more than mount them back on.So just remove four wheels and take them to town in the SUV. I guess to avoid confusion, the swap was necessary to keep the best wheels with the best tires. As the car was jacked up, an idea hit that was so simple, it is a wonder that it has not shown up yet on youTube or somewhere. After jacking up the car to remove the tire, All i did was to spin a three lug nuts back on the disc brake to hold it steady and let the disc down close to the bead ans she came off with one stroke and a bit of stomping. I found it necessary to add a short piece of channel iron to make it work even better. You know what comes next, and no,I did not have much luck with a Wheel horse rear tire that has been on for forty years, but i have yet to invent the thingamabobberwhirlymagoo accessory to keep the tire from sliding away from the rim. You guys are free to experiment and i have some ideas already in the nogginformulus Edited March 10, 2021 by ohiofarmer 1 1 Share this post Link to post Share on other sites
ClassicTractorProfessor 5,314 #1573 Posted March 11, 2021 Seems all I did today to break stuff. Been replacing a bent front axle in a 2012 Ram 3500 with one from a salvage yard. Got it all out in today, and was pressing in ball joints. I recently bought an Icon 1/2 inch drive long handle flex head ratchet to try out, I’ve been extremely happy with it, the ratchet teeth are super smooth and it is just an all around comfortable ratchet to use. That being said it didn’t like having all 165 pounds of me pulling on it with the help of a 3 foot cheater pipe, just almost ended up flat on the floor when she turned loose. Then after work I twisted off two water pump bolts, more to come on that story later 4 Share this post Link to post Share on other sites
ohiofarmer 3,276 #1574 Posted March 12, 2021 i was changing oil on the car today and had the car jacked up and thought I would try to use the weight of the car to press a rear Wheel horse tire loose from the rim. i wound up removing the tire with a carbide saw blade as it was welded on with old tire stop leak. That thing is rusted and stuck on to perfection. Gonna get out the torch and see if the rim rubber will come loose . Gonna try again with the car press on some other tires as i think it's a great idea that worked like a charm on the auto tires . I have tickled tires from the rim with a steady hand on a backhoe before, but this one ---no way Share this post Link to post Share on other sites
Pullstart 62,912 #1575 Posted March 12, 2021 @HandyProfessor Bryce are you still in the tow truck too and wrench in downtime, or full time mechanic now? Share this post Link to post Share on other sites
