Lane Ranger 10,968 #826 Posted October 5, 2020 (edited) Rode my youngest granddaughter for the first time on one of the Wheel Horse tractors! Sophia could not get enough of the riding in the cart! After riding she had to try out every Tractor parked in the garage ! She then started in on helping me with some work on RJ parts! Thats what I did with the Wheel Horses today! Edited October 5, 2020 by Lane Ranger 1 2 10 Share this post Link to post Share on other sites
Mows4three 826 #827 Posted October 5, 2020 Beautiful little girl. Lots of smiles. Looks like a great time was had by all...! Dave 3 Share this post Link to post Share on other sites
Pullstart 62,889 #828 Posted October 6, 2020 Changed the oil again in Norman. 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,561 #829 Posted October 6, 2020 (edited) @Lane Ranger Lucky kid...! Lucky Grandpa...! Edited October 6, 2020 by SylvanLakeWH 3 Share this post Link to post Share on other sites
ohiofarmer 3,276 #830 Posted October 7, 2020 I diagnosed a problem with a Hobart Handler 135 welder. Stuff like that can be hard to figure when there are two unrelated points of failure. This welder is OK for the thin stuff ,and I was adding sheet metal behind some engine tins where the weight of the coil on a 145 blew out the metal [shaker mount engine}. First, the trigger on the gun did not work, but penetrating oil made it work again. Then the wire did not advance. Since the solenoid was making the click sound as normal, I decided to take the cover off and give it a look . The simplest control there was the wire feed with one wire in and out of the speed control potentiometer. Jumpered it and the wire started feeding again. At least the computer board was not compromised and it feels pretty good to guess right the first time. Double failures are not that common, unless the feed switch somehow took out the wire speed potentiometer. Share this post Link to post Share on other sites
Mickwhitt 4,625 #831 Posted October 7, 2020 Bit of a deliveries day. load of lumber from the Woodyard and steel box section from the steel supplier to make a new fence. New section of worktop and an oak internal door for the kitchen project. Then just enough time to put the Honda mower back together for a test run to make sure the new deck metal doesn't foul the blade. This is the underside before I began rebuilding. The new sections of aluminium bonded in place with specialist adhesive. All went well and I will have a test cut next dry day we get. Its tipping down here at present. 3 Share this post Link to post Share on other sites
Stormin 9,981 #832 Posted October 8, 2020 Spent the last two days helping my mate Dunc empty his workshop at his old home. Four trailer loads in total. My 6x12 and his 5x10, over to his new home in Scotland. He's hired a Merc' Sprinter for tomorrow, for the greenhouse glass and remainder of what's in the house. 2 Share this post Link to post Share on other sites
ebinmaine 67,508 #833 Posted October 8, 2020 I rolled out of bed at 3:40 this morning. Worked out doing martial arts with Trina and her Sensei from 4:00 to 4:35 via zoom. Got to work for 6:00 like usual. Still working at 3:15 Eastern Time. Intentions this evening are to go home and thoroughly research the inside of my eyelids... 4 1 Share this post Link to post Share on other sites
Pullstart 62,889 #834 Posted October 9, 2020 So... three butt kickins’ already today EB? Sorry ‘bout that! 3 Share this post Link to post Share on other sites
Pullstart 62,889 #835 Posted October 9, 2020 The gang’s all here... at the Winchester Speedway in Winchester, Indiana. @LengerichKA88 where you at buddy? Introducing “Snoot”, Snooter for short. He’s the happy guy waving at everyone. Don’t ask about his name... long story! 6 1 Share this post Link to post Share on other sites
WHX?? 48,815 #836 Posted October 9, 2020 Nice boards... Dan make them for ya?!?!? 2 Share this post Link to post Share on other sites
ebinmaine 67,508 #837 Posted October 9, 2020 8 minutes ago, pullstart said: Winchester, Indiana. @LengerichKA88 where you at buddy I sent 'im a text... 1 Share this post Link to post Share on other sites
Pullstart 62,889 #838 Posted October 9, 2020 18 minutes ago, WHX24 said: Nice boards... Dan make them for ya?!?!? I’ve had these a year or two. They’ll probably be in mid-WI in a couple weeks... 18 minutes ago, ebinmaine said: I sent 'im a text... Awesome! He stopped by last year and hung out for a while. We got him a pit pass (from the collection plate) and hung out for a while watching practice. Something about the World’s Fastest 1/2 mile track and the fastest cars in the nation coming to play! 2 Share this post Link to post Share on other sites
Achto 27,577 #839 Posted October 9, 2020 1 hour ago, pullstart said: I’ve had these a year or two. They’ll probably be in mid-WI in a couple weeks... Best get some lights set up @WHX24 Sounds like there may be a night time corn hole tournament at plow day. 1 2 Share this post Link to post Share on other sites
ebinmaine 67,508 #840 Posted October 9, 2020 1 minute ago, Achto said: lights You don't need no steenkin' lights. Just have Kevin bring some glow sticks from his pool.... 1 2 Share this post Link to post Share on other sites
WHX?? 48,815 #841 Posted October 9, 2020 What and interfering with our nite plowing?!?! We'll just round up all the horses with lights on! 2 Share this post Link to post Share on other sites
Pullstart 62,889 #842 Posted October 10, 2020 Figured out this weekend that a $5 wheelchair, a tow strap and a golf cart make for a real fun time! @Achto @prondzy @WHX24 @Shynon this might be more fun than water skiing behind a ! The key is to watch out for the ‘tater patch, loose crushed asphalt with your Jesus Cruisers on and make sure there is plenty of crowd to watch it not work out so well when those things arise! 1 7 Share this post Link to post Share on other sites
Achto 27,577 #843 Posted October 10, 2020 24 minutes ago, pullstart said: this might be more fun than water skiing behind a ! Looks like some one could get hurt. OK, I'm in!!! 1 3 Share this post Link to post Share on other sites
WHX?? 48,815 #844 Posted October 10, 2020 Just ain't right....I'm in! 5 Share this post Link to post Share on other sites
ebinmaine 67,508 #845 Posted October 11, 2020 Kev who does yer laundry. You got red shirt all over the dirt on ya back. 3 Share this post Link to post Share on other sites
Stormin 9,981 #846 Posted October 11, 2020 When I was a boy, we lived at the bottom of a hill. Up the hill lived a chap who had lost use of his legs through polio. He'd come down that hill in his wheelchair on the rear wheels only. The trick is to lean back so the castors are off the ground. Could be a bit difficult holding on to the straps though. Share this post Link to post Share on other sites
Mickwhitt 4,625 #847 Posted October 11, 2020 Today I heard a great friend of mine had passed away, he was younger than me and had only a few years till retiring from the force. He leaves a wife and two lovely kids. Bless him and keep him. Also took a trip to the coast with our dogs to blow away the blues. Made us smile seeing them on the beach fir the first time. 1 Share this post Link to post Share on other sites
ebinmaine 67,508 #848 Posted October 11, 2020 2 minutes ago, Mickwhitt said: Today I heard a great friend of mine had passed away, he was younger than me and had only a few years till retiring from the force. He leaves a wife and two lovely kids. Bless him and keep him. Also took a trip to the coast with our dogs to blow away the blues. Made us smile seeing them on the beach fir the first time. I'm Workin on gathering up some extra strength positive karma to ship over. Should be there momentarily... 1 Share this post Link to post Share on other sites
Mickwhitt 4,625 #849 Posted October 12, 2020 Thanks Eric, I feel it coming through loud and clear. Three years short of retirement my friend was taken from us by an aggressive cancer. I feel genuinely as if a part of me has died along with steve. Thank you for your kind thoughts and wishes, far too many people are being taken by this horrible illness. 2 Share this post Link to post Share on other sites
ebinmaine 67,508 #850 Posted October 12, 2020 Aye. Mitigate the morose mood my Mick mate. Over the last few years I've found positive karma to be quite lightweight. Some say it even compares to helium. With that in mind you can feel free to keep an amount of what I sent over with you in your pocket. The only real disadvantage to positive karma over helium that I can find is not being able to make a very interesting voice as we do after inhaling helium..... 1 1 Share this post Link to post Share on other sites
