Ed Kennell 38,159 #5726 Posted June 1, 2023 Finally finished moving my MILs household goods to the auction house for sale next week. It seems strange to be hauling to the auction instead of hauling stuff home. 1 4 Share this post Link to post Share on other sites
Horse Newbie 7,069 #5727 Posted June 2, 2023 My weeds is thigh high… got the two skid plates back on the Cub deck and couldn’t wait any longer to scare some gophers… 5 Share this post Link to post Share on other sites
Horse Newbie 7,069 #5728 Posted June 3, 2023 One cut and the blades need repainted… less than 100 feet and the left front dust cap came off… with no glob of old grease behind it, it would not stay on… yard is cut… will have to detail it tomorrow before I ride the hog up to Kannapolis NC to see Collective Soul at a free concert… 3 1 Share this post Link to post Share on other sites
Horse Newbie 7,069 #5729 Posted June 5, 2023 Cut the yard Friday evening. Trimmed and blowed Saturday… So today I jumped on trimming the 2 Holly bushes that I despise… Decided to get the rolling stock out and run them around a little. The 1984 Work Horse GT-1600 got called up to work. I really trimmed those Holly bushes up good. Now they are out of my hair for good. Picking up all of those prickly leaves was a pain in the fingers. After hauling the Holly bush limbs to the curb for pick up, I decided to cut some neighbors limbs that were hanging over the fence into my airspace. The Work Horse and the 10 cubic feet Agri-Fab trailer made fairly easy work of that. 2 2 Share this post Link to post Share on other sites
ebinmaine 67,455 #5730 Posted June 5, 2023 8 hours ago, Horse Newbie said: really trimmed those Holly bushes up good. Now they are out of my hair for good Looks good. A little C4 or tannerite might have been more fun but it looks good. 😜 We spent yesterday in the basement after I made a run to the transfer station in the AM. Cleaning up all the supplies and such from the Saturday events. When that was done I moved on to opening the packages I hadn't been able to touch all week and organizing where that all went. Got a carb to rebuild for a good man and several others for myself so I decided to bite the bullet and ordered an ultrasonic cleaner. Just an afternoon very well spent decluttering the various areas down there. 1 1 Share this post Link to post Share on other sites
Shynon 7,459 #5731 Posted June 5, 2023 Shop upgrade just finished up. 4 2 Share this post Link to post Share on other sites
ebinmaine 67,455 #5732 Posted June 5, 2023 1 minute ago, Shynon said: Shop upgrade just finished up. Niiiiice. Is that AC only or heat as well? Trina has been looking at those for the garage upstairs. 1 Share this post Link to post Share on other sites
Shynon 7,459 #5733 Posted June 5, 2023 AC and heat 24k BTU 1 1 Share this post Link to post Share on other sites
ebinmaine 67,455 #5734 Posted June 5, 2023 2 minutes ago, Shynon said: AC and heat 24k BTU If you have any details or links or anything she'd be interested 1 Share this post Link to post Share on other sites
Shynon 7,459 #5735 Posted June 5, 2023 14 minutes ago, ebinmaine said: If you have any details or links or anything she'd be interested It's a Mr. Cool brand, bought through Menards 1 1 Share this post Link to post Share on other sites
Horse Newbie 7,069 #5736 Posted June 6, 2023 (edited) 4 hours ago, Shynon said: Shop upgrade just finished up. All I have is a measly window unit, and it barely keeps the Lackey’s Hot Rod, Lawn Mower, Tractor, and Motorcycle Repair and Restoration Shop cool. BTW @Shynon that’s a “cool” upgrade. That will be the “hottest” ticket in the shop ! Edited June 6, 2023 by Horse Newbie 2 Share this post Link to post Share on other sites
Tractorhead 9,064 #5737 Posted June 6, 2023 On 6/3/2023 at 1:58 AM, Horse Newbie said: My weeds is thigh high… got the two skid plates back on the Cub deck and couldn’t wait any longer to scare some gophers… Not the weeds only here.... our whole grass grows that height the last 3 rainy months.... No chance to mow inbetween. That was my reason for the highgrass mower.... today few parts arrived and i decided to upgrade it a little... Firstly i removed the Discs from the Mower and greasing all the gearboxes. Than i gram a parted old Sicklebr i have for spareparts - to have is allway’s better than need- They be about 30years old but in good shape - just a little surface rust. than i drilled the middlesection up to 11mm next step was to shorten the Tips a little, because they be too long. and at least i mounted they into the Discs. instead of that thingis... boy, that looks dangerous but also hot. i machined up the Jackshaft pulley to it’s final Bearings fit and changed also both Belts, the one to the Jackshaft and the other to the Mowerdeck. at least i adjusted the Belt spanner to its final position and cut the screwhead that it didn‘t collide with the Belt when it goes to hard sideway‘s. Again it was time for a Testdrive - just in idle... let‘s see how it works... Niiiice - after few rpm‘s it stabilizes itself completely and no flattering is there. pretty Cool. 5 Share this post Link to post Share on other sites
ebinmaine 67,455 #5738 Posted June 6, 2023 14 minutes ago, Tractorhead said: Niiiice I'd say! Seems to me with those new teeth your cutter should be able to take on grass, weeds, shrubs, small trees. Maybe a mountain or two. 2 Share this post Link to post Share on other sites
Tractorhead 9,064 #5739 Posted June 6, 2023 Maybe a Foot or a Leg....😂 4 Share this post Link to post Share on other sites
Horse Newbie 7,069 #5740 Posted June 6, 2023 (edited) That thing makes space travel and deep sea diving look safe…😆 Edited June 6, 2023 by Horse Newbie 1 5 Share this post Link to post Share on other sites
Pullstart 62,841 #5741 Posted June 9, 2023 I put an alternator in a diesel pusher motor home today. Fun, fun. I learned that one style has enough internal cooling, the old style external fan isn’t required. I also came up with a snazzy trick to remove the nut for the pulley swap too! 2 1 Share this post Link to post Share on other sites
ebinmaine 67,455 #5742 Posted June 9, 2023 34 minutes ago, Pullstart said: snazzy trick to remove the nut for the pulley swap too! That's on the list of things I could have known 30 years ago. Nicely done. 1 Share this post Link to post Share on other sites
19richie66 17,500 #5743 Posted June 9, 2023 Back wall 98.2 % complete. 6 Share this post Link to post Share on other sites
ebinmaine 67,455 #5744 Posted June 10, 2023 11 minutes ago, 19richie66 said: Back wall 98.2 % complete. What's the other 1.8% ? 2 Share this post Link to post Share on other sites
Pullstart 62,841 #5745 Posted June 10, 2023 Looks like he missed a spot there 3 Share this post Link to post Share on other sites
19richie66 17,500 #5746 Posted June 10, 2023 1 hour ago, ebinmaine said: What's the other 1.8% ? The paint. I may be off on my percentage. 4 Share this post Link to post Share on other sites
8ntruck 6,998 #5747 Posted June 10, 2023 (edited) We had a busy, productive week here. Finally got the brick masons and roofers on site for my front porch rebuild project. Before picture - roof structure complete, ready for final roofing & re-application of bricks: After brick masons & roofing. We went with a light gray membrane roof: Now all I got left to do is get the brick masons back to build knee walls for the steps, get the concrete guy to pour the steps, wire the porch lights, refinish the front door woodwork, refinish the front windows, caulk the door and windows, build the brick columns and railings, box the beams in, install a ceiling, facia, soffit, gutters, and downspouts. Piece O cake. Edited June 10, 2023 by 8ntruck 2 6 Share this post Link to post Share on other sites
ebinmaine 67,455 #5748 Posted June 10, 2023 13 minutes ago, 8ntruck said: front porch rebuild project Lookin' excellent!! 1 Share this post Link to post Share on other sites
ebinmaine 67,455 #5749 Posted June 10, 2023 We had the electrician here today to connect the two circuits left in the shed and add several more to the barn. We now have a 220V circuit out on the far side of the building for where the air compressor is going to set. Another 220 just inside the main small door. The upstairs and downstairs light circuits are complete. We also added a 120V circuit to the near side of the building under the shed roof for where the chop saw lives. And a 120 just inside the main door with a couple extra feeds off that so there's 6 plugs within a few feet inside the barn. That'll be it til we make a decision on climate control for both floors. 3 Share this post Link to post Share on other sites
Tractorhead 9,064 #5750 Posted June 10, 2023 Take a resumee after several Day‘s and Months of Fawn saving flights. Today first Mowing tasks ends in our Valley, next mowing tasks begin in 4 Weeks. 24 flights each day at 20:00-21:00 to locate fawns and when there be out. So no fawns where harmed also this year at our Valley while Mowing. At all we saved 12 fawns since i do my first drone flight for fawn saving. We all be very proud of that success. 👍 2 Valley‘s away they mowed 3 fawns last week at the first Mowing. Nobody of them ask me to help with the thermal drone, but they know what i do. I do this all volunteer, including my drones cost and the Thermalcams. so if they call me, they have absolute no cost. each saved fawn is payment enough for me.❤️ 2 4 Share this post Link to post Share on other sites
