SylvanLakeWH 25,547 #5301 Posted January 10, 2023 @Pullstart still need some pics of the jeep... back side of your head is well ok the back side of your head , but come on man you knows the rules... 4 Share this post Link to post Share on other sites
Pullstart 62,840 #5302 Posted January 10, 2023 I’ll be back at some point. I’ll get you happy some day @SylvanLakeWH! 1 Share this post Link to post Share on other sites
Pullstart 62,840 #5303 Posted January 10, 2023 A friend bought a new stacker hauler. It was only powered by a generator, no shore power. Today I hooked up shore power and a transfer switch. We just need to charge the battery to start the genny to test the whole system. 3 Share this post Link to post Share on other sites
Pullstart 62,840 #5304 Posted January 10, 2023 And no… it doesn’t stack Wheel Horses. It’ll haul two race cars up top, while the tools and tires and crew stuff is below. 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,547 #5305 Posted January 10, 2023 5 minutes ago, Pullstart said: And no… it doesn’t stack Wheel Horses. It’ll haul two race cars up top, while the tools and tires and crew stuff is below. Of course not... wrong color... 1 1 Share this post Link to post Share on other sites
formariz 11,987 #5306 Posted January 10, 2023 Transplanted a little bit of hair. 3 4 Share this post Link to post Share on other sites
953 nut 55,198 #5307 Posted January 11, 2023 You must know the Fuller Brush man very well. 1 4 Share this post Link to post Share on other sites
WHX?? 48,815 #5308 Posted January 11, 2023 2 hours ago, Pullstart said: A friend bought a new stacker hauler. Gotta like the mini split... always nice to see how the rich people live... 1 1 Share this post Link to post Share on other sites
ebinmaine 67,455 #5309 Posted January 11, 2023 23 minutes ago, 953 nut said: I knew one growing up! 2 Share this post Link to post Share on other sites
formariz 11,987 #5310 Posted January 11, 2023 32 minutes ago, 953 nut said: You must know the Fuller Brush man very well. His last stop was here! 1 2 1 Share this post Link to post Share on other sites
WHX?? 48,815 #5311 Posted January 11, 2023 (edited) 27 minutes ago, ebinmaine said: I knew one growing up! The way you get at yer projects you should be one... You know Caz if that was one of @Ed Kennell's projects he would have coon an squirrel tails on it... Edited January 11, 2023 by WHX?? 2 Share this post Link to post Share on other sites
Ed Kennell 38,158 #5312 Posted January 11, 2023 20 hours ago, WHX?? said: he would have coon an squirrel tails on it Maybe gobbler beards and tails. 2 1 1 Share this post Link to post Share on other sites
Ed Kennell 38,158 #5313 Posted January 11, 2023 Plenty of blue PeeAaa tractors at the auction today....no reds though. I did pick up some AC parts that will be listed in other tractor classified. 2 1 Share this post Link to post Share on other sites
formariz 11,987 #5314 Posted January 11, 2023 @Ed Kennell What are the little heads on dresser top Ed? 1 Share this post Link to post Share on other sites
Handy Don 12,216 #5315 Posted January 11, 2023 21 hours ago, formariz said: His last stop was here! If you want a real shock, check out the current prices for a good quality whisk or brush. 1 Share this post Link to post Share on other sites
Ed Kennell 38,158 #5316 Posted January 11, 2023 21 minutes ago, formariz said: @Ed Kennell What are the little heads on dresser top Ed? I call them "tundra bunnies" Cas. I create them from deer and elk feet. 2 1 Share this post Link to post Share on other sites
ebinmaine 67,455 #5317 Posted January 12, 2023 1 hour ago, Ed Kennell said: tundra bunnies Themmuh native t' the nawth Maine woods auhm pritty sho-ahh. Share this post Link to post Share on other sites
SylvanLakeWH 25,547 #5318 Posted January 12, 2023 2 hours ago, Ed Kennell said: I call them "tundra bunnies" Cas. I create them from deer and elk feet. 6 minutes ago, ebinmaine said: Themmuh native t' the nawth Maine woods auhm pritty sho-ahh. Taste just like chicken... 1 Share this post Link to post Share on other sites
WHX?? 48,815 #5319 Posted January 12, 2023 2 hours ago, formariz said: @Ed Kennell What are the little heads on dresser top Ed? 2 hours ago, Ed Kennell said: I call them "tundra bunnies" Cas. I create them from deer and elk feet. Heaven forbid ... I thought they was shrunken heads... 2 Share this post Link to post Share on other sites
Ed Kennell 38,158 #5320 Posted January 12, 2023 4 hours ago, ebinmaine said: Themmuh native t' the nawth Maine woods auhm pritty sho-ahh. I did have a few escapees. Last seen they were headed Nawth. 2 2 Share this post Link to post Share on other sites
Pullstart 62,840 #5321 Posted January 12, 2023 On 1/10/2023 at 7:36 PM, WHX?? said: Gotta like the mini split... always nice to see how the rich people live... *new to him. It came from a dirt racing team in WI. It was filthy! Share this post Link to post Share on other sites
Horse Newbie 7,069 #5322 Posted January 13, 2023 I watched “Taryl Fixes All” on YouTube tonight . I seen @Pullstart ‘s “Snowmotractor” on the cover of Lawn and Garden Tractor magazine that Taryl was reading, and I believe Taryl was reading the article on it because I seen it in the centerfold I think. That’s a trip ! 3 1 1 Share this post Link to post Share on other sites
Pullstart 62,840 #5323 Posted January 13, 2023 Kind of a flop day today. I was contacted by the blood center I donate at, there is a local blood emergency. They are about 1/2 day ahead of demands as of this morning. They asked if I would go to another location ahead of my scheduled drive location. Sign me up! I am A+ and have a certain RO characteristic that makes me pretty special in their eyes. I got there at 12:00 and was the first person in a seat. I generally do double red donations, where they take extra blood cells out and replenish me with saline at the same time, but lately, they have needed my plasma more than my blood. Same machine, different process. Today, being in a different location with different nurses, I found it funny that it drew three times from me, with no returns. I pointed out that something was wrong, but was quickly assured that it was just taking longer than usual. The boss man walked by and pointed out the machine is not separating the plasma as intended and all my blood needs to be returned to me, and I am an abort mission on a 24 hour hood to be able to donate again. Liability, processes, lawyers, etc… I’m already here with a needle and no blood is drawn. Take it again, there are people who need my fluids more than I do! I ended up finding another location tomorrow at 12:05, and will start all over. Today was supposed to be my 3 gallon day. I got the pin, but no sense of the accomplishment. Fingers crossed, I can help someone tomorrow. 1 1 4 Share this post Link to post Share on other sites
ohiofarmer 3,265 #5324 Posted January 13, 2023 (edited) On 1/9/2023 at 8:08 AM, ohiofarmer said: I cracked open the disaster that is a Dana 80 rear axle. There are actually roller bearings loose when it fractured. I broke down five miles from home at a party yard and he loaded up the 3500 Diesel and brought me home. You can also see the bearing race over the place where the retention nut is supposed to be. The crappy clip meant to hold it on let the nut unwind. That thing got hot fellas and I ain't kiddin. Hopefully the infrastructure of the basic axle can be saved. Both axle hubs will be completely rebuilt. The other side is OK and shows the basic parts needed. Hub oil seal,inner bearing,outer bearing, and retention nut. I may have to buy a thread cutting die to chase the threads if the thread file dies not restore them. On edit:things are proceeding along and I have bought a needle scaler,all kinds of bearings and seals, drained the differential and it looks excellent. I used the hand held type thread chaser and a new axle nut is starting a bit. The regular two inch hex die is on its way. things are looking up i This is just at the root idea stage so far. i have a lot of things i can envision that may not work out, but I think that using the axle itself a kind of lathe bed might have some merit. The starting point will be putting a plastic pipe insert inside the axle and making a jig that holds the die in alignment that turns on the pipe Edited January 13, 2023 by ohiofarmer 2 Share this post Link to post Share on other sites
ohiofarmer 3,265 #5325 Posted January 13, 2023 Here is the due a two inch by 16 tpi 2 Share this post Link to post Share on other sites
