Andy N. 2,153 #4376 Posted July 10, 2022 Man did my chipper/vac make the loudest screeching sound when this paddle let go. Luckily they still sell aftermarket kits. All good to go back to work at the branch pile. Should last another 30 years. And now I have 3 spares. 3 1 Share this post Link to post Share on other sites
ebinmaine 67,480 #4377 Posted July 10, 2022 6 hours ago, Stormin said: Sears GT16 Is that a Tecumseh engine Norm? Share this post Link to post Share on other sites
ebinmaine 67,480 #4378 Posted July 10, 2022 Here's what Trina and her mom built today. 1 1 1 4 3 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #4379 Posted July 10, 2022 Your new place is finished!!! They did a great job!!! 5 Share this post Link to post Share on other sites
Stormin 9,981 #4380 Posted July 10, 2022 7 hours ago, ebinmaine said: Is that a Tecumseh engine Norm? B&S twin 16hp. Love the loo BTW. 1 1 Share this post Link to post Share on other sites
ebinmaine 67,480 #4381 Posted July 10, 2022 1 hour ago, Stormin said: B&S twin 16hp. Love the loo BTW. Thanks Norm. I'll pass that along. She's had the idea for several years now. There are places in our forest that we'd like to set up cabin tents as little get-aways. The new loo would be nice to have out there. It'll first get used for her daughter's wedding here next month then be relegated to the original intended position. I ask about the engine because I understand some Sears used a Tecumseh. I'm fiddling around with one of my '74 C160-8 Tec powered tractors. I cleaned out the carb and put a Facet electric fuel pump on. It'll start and run for a bit then makes some interesting popping and dies out. I'm leaning towards retrofitting a Kohler #30 carb off a C160 to see what happens. Today I'll check the flywheel pin clearance then see about the carb swap. 1 1 Share this post Link to post Share on other sites
Horse Newbie 7,069 #4382 Posted July 10, 2022 On 7/6/2022 at 9:03 PM, ebinmaine said: Me n BBT installed the trailer hitch on the Kia Soul this evening. Need to install the wiring harness. Internet indicates that's the tough part. Welded it right to the plastic bumper… good job ! 6 Share this post Link to post Share on other sites
ebinmaine 67,480 #4383 Posted July 11, 2022 13 hours ago, Horse Newbie said: Welded it right to the plastic bumper… good job ! That's one o them magic floating hitches. 1 1 Share this post Link to post Share on other sites
19richie66 17,500 #4385 Posted July 12, 2022 1 hour ago, AMC RULES said: Nice office view! 2 Share this post Link to post Share on other sites
Stormin 9,981 #4386 Posted July 13, 2022 Looks a reet GRADELY job. 3 Share this post Link to post Share on other sites
8ntruck 6,999 #4387 Posted July 14, 2022 Got out in our 20 acres of woods today with my chain saw. I dropped the trees in the clearing for the shop building I started last fall that were too big for my brush blade. Again, I was ready to quit when the saw's gas tank ran out - good design work on the saw, there. Two of the trees were cedars. Think I will just limb those and roll the logs out of the way, as they are a good size for possible use in a structure of some sort. Here are some 'after' pictures: Along the way, I found one of nature's oddities in one of the pieces of brush. Notice how one stick is growing through a branch at almost 90 degrees: I'll probably be back out there tomorrow tossing more brush onto the growing brush pile and making short ones out of long ones. 3 Share this post Link to post Share on other sites
Stormin 9,981 #4388 Posted July 14, 2022 Went over to my mates in Scotland this morning as usual for a Thursday. First job was to mount the P.T.O. saw onto the tractor. MF farm tractor BTW. Filled a dumpy bag full of logs from a heap of branches. Then swapped the saw for the log splitter. With that we filled four more dumpy bags from the heap of cut up tree trunks. About two and a half ton for four hours work. There's about 20T at least of ash trees to come down due to ash die back. Keep the home fires going for a while. 5 Share this post Link to post Share on other sites
Ed Kennell 38,170 #4389 Posted July 14, 2022 50 minutes ago, Stormin said: Filled a dumpy bag ????? 1 1 Share this post Link to post Share on other sites
Stormin 9,981 #4390 Posted July 14, 2022 Here you go Ed. 2 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #4391 Posted July 14, 2022 Not what I imagined. 2 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,297 #4392 Posted July 14, 2022 @Ed Kennell and @AMC RULES I thought @Stormin was talking about gunny sack that would hold about 50 lbs. Glad he cleared that up. 1 3 Share this post Link to post Share on other sites
Ed Kennell 38,170 #4393 Posted July 14, 2022 That's a trash bag we normally rent from our Waste management company for around $25. 2 Share this post Link to post Share on other sites
Horse Newbie 7,069 #4394 Posted July 14, 2022 (edited) So I had to pull in and “I’m just looking”. Sold from the same dealer my 1994 520H was sold from… Quick poll… would you do $1650.00… no one came out… did not try to crank… Edited July 14, 2022 by Horse Newbie 1 Share this post Link to post Share on other sites
oliver2-44 9,745 #4395 Posted July 14, 2022 Nice low hours on that 416, but kind of weathered all around. To high a price for me! 1 Share this post Link to post Share on other sites
Handy Don 12,217 #4396 Posted July 14, 2022 At least $500 above my best offer. Despite low hours, the rust, dings and dents would indicate neglect or indifference to me and cause me concern about hidden issues. 1 Share this post Link to post Share on other sites
Horse Newbie 7,069 #4397 Posted July 14, 2022 34 minutes ago, oliver2-44 said: Nice low hours on that 416, but kind of weathered all around. To high a price for me! Yes low hours, but does the clock work ? Share this post Link to post Share on other sites
Horse Newbie 7,069 #4398 Posted July 14, 2022 1 minute ago, Handy Don said: At least $500 above my best offer. Despite low hours, the rust, dings and dents would indicate neglect or indifference to me and cause me concern about hidden issues. Exactly !… one look and you/I can tell if a piece of equipment has been cared for. Share this post Link to post Share on other sites
8ntruck 6,999 #4399 Posted July 15, 2022 Back out to our woods this afternoon. Temperature was about 90. Worked a couple of hours, mostly piling the brush from the trees I cut down yesterday. Got out the pull along and ratchet straps to skid the cedar logs out of the way. Didn't work out too well. Broke a couple of the ratchet straps and lost the nut off of the drum pivot bolt on the come along. Was pretty wiped out by then and took that as a sign that I should call it a day. While walking the 700 feet or so out of the woods, I started mentally marking the trees that will have to be removed for the driveway. Man, I'll have a lifetime supply of firewood after that project. 2 Share this post Link to post Share on other sites
Stormin 9,981 #4400 Posted July 17, 2022 SWMBO has been hinting for some time, about a new fence along the front of the garden. So this morning went out and bought eight sections of picket fencing 6ft long x 4ft. The posts I'll get in the morning from a local wood yard. This afternoon I started cutting down a big leylandi bush. Just the stump and roots to get out now. Wasn't going to tackle them. 27C = 80.6 F. A tad warm for me. Last time I can remember this hot was in 1978-97. Took SWMBO and some of her paintings for an art exhibition in a seaside village just down the coast. Pleasant, cooling drive down the coast road with all the car windows open. 2 Share this post Link to post Share on other sites