PeacemakerJack 10,738 #3251 Posted October 23, 2021 On 10/20/2021 at 4:46 PM, 19richie66 said: I’m working on thinning out my woods area… Next time we are down by you, we can do some trail riding on the tractors!🙌🏻 1 1 Share this post Link to post Share on other sites
19richie66 17,508 #3252 Posted October 23, 2021 11 minutes ago, PeacemakerJack said: Next time we are down by you, we can do some trail riding on the tractors!🙌🏻 I’m hoping to get some trails cut out soon. I have a lot of unforgiving vines with needles on them. Cutting out bushes and stringy trees. Little by little …….. 4 Share this post Link to post Share on other sites
19richie66 17,508 #3253 Posted October 23, 2021 Two more done….. 2 5 Share this post Link to post Share on other sites
Pullstart 62,876 #3254 Posted October 23, 2021 1 hour ago, ZXT said: I must've missed it - what was the reason for the name change? It was Pullhosen’s Pony Express for a bit. Haulin’ horses and wearing Lederhosens all across the land 6 Share this post Link to post Share on other sites
Pullstart 62,876 #3255 Posted October 23, 2021 47 minutes ago, 19richie66 said: I’m hoping to get some trails cut out soon. I have a lot of unforgiving vines with needles on them. Cutting out bushes and stringy trees. Little by little …….. You need you a goat on a rope Richie 3 Share this post Link to post Share on other sites
8ntruck 7,004 #3256 Posted October 23, 2021 Not today's projects, but I've promised pictures. First the sub $100 trailer 'kit' I've picked up: Like I said, more of a loosely assembled kit suggesting what the final project should look like. It is a 6 x 10, so it will be capable of transporting a couple of horses. The door was side hinged, but it appears the option to convert it into a ramp door is there. Next is the work I'm starting in our 20 acres of woods in Ky. This picture is representative of what I started with: Several hours and a couple of tanks of gas with a brush saw on the Stihl trimmer resulted in this: Now I can get my laser level and elevation stick in there to shoot ground contours and start figuring the grading requirements for the site. Planning on a 36 by 48 metal arch building here. Next trip to Ky., I'll have to pack real chain saw along. On this trip, I just had a 10" battery powered B&D saw along for light limb trimming. Wasn't going to try to fell trees with it. The C195 sure would be handy working in the woods. Got to get the trailer done so I can get it there. 2 1 Share this post Link to post Share on other sites
ebinmaine 67,497 #3257 Posted October 23, 2021 3 hours ago, Pullstart said: all across the land One o our favorite phrases. Oft times when exacerbating exaggerations of our limitless talents and skills BBT or I say I'm known for *******. "all across the land". 1 Share this post Link to post Share on other sites
WHX?? 48,815 #3258 Posted October 23, 2021 8 hours ago, Pullstart said: It was Pullhosen’s Pony Express for a bit. Haulin’ horses and wearing Lederhosens all across the land He ain't lying @ZXT I can vouch for that! Hauled a horse over for me and co-piloted on another score! 3 Share this post Link to post Share on other sites
WHX?? 48,815 #3259 Posted October 23, 2021 (edited) 9 hours ago, PeacemakerJack said: Next time we are down by you, we can do some trail riding on the tractors!🙌🏻 And swing by Jim's place and pick up a water heater that belongs in Disney World but is taking up the space of horse here! Ain't that right 'Hosen @Pullstart! Edited October 23, 2021 by WHX?? 2 Share this post Link to post Share on other sites
Goldnboy 920 #3260 Posted October 24, 2021 On 10/19/2021 at 2:35 PM, RandyLittrell said: Took a little roadtrip and picked up this 312 classic for Terrie @Goldnboy It's a nice tractor that he should be arrested for stealing! Haven't made up my mind if I am gonna give it to him yet!! This one didn't want to leave we had to use the 1277 and loader to get in my trailer (I knew it stayed to long). For some reason it wouldn't start or roll well and the parking brake wasn't on. But I introduced it to its new friend at home it had been alone for several years. 2 1 Share this post Link to post Share on other sites
RandyLittrell 3,877 #3261 Posted October 24, 2021 My son picked up a slide off the curb someone was getting rid of, so we did a little modification to the deck this afternoon. Bryan and Grandson Vincent were a big help!! 4 1 3 Share this post Link to post Share on other sites
AMC RULES 37,130 #3262 Posted October 24, 2021 Saved these two 1951 & 1953 cast iron blocked Briggs model 5s & 6s from obscurity here today. 3 1 Share this post Link to post Share on other sites
19richie66 17,508 #3263 Posted October 24, 2021 1 minute ago, AMC RULES said: Saved these two 1951 & 1953 cast iron blocked Briggs model 5s & 6s from obscurity here today. Those are cool. I have a 1.75 hp Briggs “N” engine I got with some others I bought. I believe it’s a 1948. 2 Share this post Link to post Share on other sites
Jeff-C175 7,202 #3264 Posted October 26, 2021 (edited) On 10/24/2021 at 5:52 PM, AMC RULES said: Saved these two I'll have to look, but I believe that I've got two of that same engine out in the 'junque shop' that I've been tripping over for many years. I don't plan to do anything with them. You want them for parts perhaps? PM me if you're interested! You can have 'em but I can't ship 'em. edit: there's actually three of them. One is incompleted, missing flywheel and carb, one missing air cleaner, one hooked up to a water pump. I'm not sure if all of them are 6S or not but the blocks look very similar. They're up for grabs for free, pickup only. Edited October 26, 2021 by Jeff-C175 Share this post Link to post Share on other sites
Jeff-C175 7,202 #3265 Posted October 26, 2021 I tripped over those engines again yesterday as a matter of fact... moving some stuff around to get access to a confined space where tree rats (squirrels) had gotten into the rafters and pulled all the insulation out and built a nest with it. What a nasty job that was! Squirrels have TERRIBLE housekeeping and bathroom habits! Climbing into the rafters crawling on my belly like a reptile suited up and duct taped with respirator and all... in a space about a foot and a half high between ceiling joists and rafters. If Mike Rowe can do it, so can I ! I guarantee that that particular squirrel will not be back. I've done all I could to exclude future visitors... Share this post Link to post Share on other sites
ebinmaine 67,497 #3266 Posted October 26, 2021 5 minutes ago, Jeff-C175 said: crawling on my belly like a reptile suited up and duct taped with respirator and all... in a space about a foot and a half high between ceiling joists and rafters. I guarantee that that particular squirrel will not be back. I've done all I could to exclude future visitors... Yeah.... No. I find it much more enjoyable to combine the comfort of a lounge chair with the excitement of a 12 ga. 1 2 Share this post Link to post Share on other sites
8ntruck 7,004 #3267 Posted October 26, 2021 I spent the afternoon winterizing the plumbing at the lake house. Antifreeze in the drains and toiled and hooked up my little air compressor to blow the water out of the pipes. The air compressor is a little 2 gallon job for air staplers. A bigger compressor would make the job go quicker. Stuffed the porch furniture into the storage sheds too. Winter is coming. Share this post Link to post Share on other sites
squonk 41,115 #3268 Posted October 26, 2021 3" of rain. Roof leak, flooded basement and wife's birthday. 4 Share this post Link to post Share on other sites
Jeff-C175 7,202 #3269 Posted October 26, 2021 1 minute ago, squonk said: 3" of rain. Roof leak, flooded basement and wife's birthday. Tell your bride Happy Birthday! In spite of the flooding... We didn't get quite as much rain here at the 'shaw' but at least 2" and I'm happy to say that there was no evidence that the back shop roof is still leaking. I think I finally discovered where the leak I've been chasing for 15 years is !!!! About TWENTY FEET from where it comes out on the bottom !!! Water must have been entering and traveling between the two layers of roofing before finding it's exit route. Share this post Link to post Share on other sites
Achto 27,572 #3270 Posted October 27, 2021 (edited) I cooked up the final fresh pickings from my poblano pepper plant tonight. Stuffed them with some chicken, black beans, cheese, and a few other goodies. Then cooked them in the smoker. Garnished with some sour cream and salsa with some white rice on the side. Yummy!!! Can't wait for the next growing season. Edited October 27, 2021 by Achto 5 3 2 Share this post Link to post Share on other sites
WHX?? 48,815 #3271 Posted October 27, 2021 11 minutes ago, Achto said: I cooked up the final fresh pickings from my poblano pepper plant tonight. Stuffed them with some chicken, black beans, cheese, and a few other goodies. Then cooked them in the smoker. Garnished with some sour cream and salsa with some white rice on the side. Yummy!!! Can't wait for the next growing season. I'm hungry and yer an @$$ .... 1 2 Share this post Link to post Share on other sites
Achto 27,572 #3272 Posted October 27, 2021 4 minutes ago, WHX?? said: I'm hungry and yer an @$$ .... I'm full and sweating just a lil bit. 1 6 Share this post Link to post Share on other sites
Stormin 9,981 #3273 Posted October 27, 2021 Yesterday, removed the rotting wooden lintel from above the farm workshop door and fitted a new one. Sounds simple but was anything but. Door runners and door to replace yet. May get done today now the hard work's been done. Thought the weather has turned nasty. Heavy rain and high winds. 3 Share this post Link to post Share on other sites
Pullstart 62,876 #3274 Posted October 27, 2021 Doing some slow, select cutting. This tree is over the shop, storage barn, chicken house and LP tank. Slow and steady does it. Might get on the barn roof with the saw and trim as much if the top as possible. 3 Share this post Link to post Share on other sites
Pullstart 62,876 #3275 Posted October 27, 2021 Slow. Steady. Oh yeah, breathe. Just cleared the coop roof and brushed the fence but no damage. Break time. 2 1 Share this post Link to post Share on other sites
