Mr Magoo 226 #51 Posted July 6, 2020 2 minutes ago, peter lena said: very good results using LUCAS RED AND TACKY GREASE ON DECK SPINDLE ISSUES, with a 550 drop point , the grease will not run off the bearings , having rebuilt a couple of decks with red and tacky on every contact friction point , they run with a total ease and very quiet . i also cut at the highest setting , and have rear discharge decks . pete Shaft is bent. Share this post Link to post Share on other sites
Mr Magoo 226 #52 Posted July 19, 2020 Getting close to getting it all back together. Could have had it done if I had remembered to bring home the wrench I made at work for the big az nut on the new shaft. 1 1 1 Share this post Link to post Share on other sites
Guest 88vic #53 Posted July 20, 2020 With all due respect, that is a sexy looking deck ! Fine workmanship there sir ! Share this post Link to post Share on other sites
Tuneup 1,433 #54 Posted July 20, 2020 Sweet deck! This is my project for this winter - got a 42 SD and RD that need refresh. Share this post Link to post Share on other sites
