MikeBhardware 1 #1 Posted April 23, 2020 Wondering if anyone has installed a 60" mid deck on a D-200 I know they offered a 60" for the D-250 would one of those fit? I picked up this poor old girl and it came with a 48" mower but would like something bigger. Any thoughts? 1 Share this post Link to post Share on other sites
"D"- Man 827 #2 Posted April 23, 2020 I am fairly certain that there are a couple of post of this being done. It took a bit of modifications. 1 Share this post Link to post Share on other sites
MikeBhardware 1 #3 Posted April 23, 2020 Thank you I tried searching for someone that has done it but didn't see anything, it must be an old post I will look further back. Share this post Link to post Share on other sites
"D"- Man 827 #4 Posted April 23, 2020 The one I was searching was not found either, I was able to get the pics from the gallery, not sure if I would be permitted to repost. I'll check with a moderator. Share this post Link to post Share on other sites
"D"- Man 827 #5 Posted April 23, 2020 (edited) Here are some pictures of the post, however; it is no longer listed. These are from Andy, Wheeledhorseman. Edited April 23, 2020 by "D"- Man Share this post Link to post Share on other sites
MikeBhardware 1 #6 Posted April 23, 2020 That is a 60" deck it looks small to me? Share this post Link to post Share on other sites
pacer 3,168 #7 Posted April 23, 2020 12 minutes ago, MikeBhardware said: That is a 60" deck it looks small to me? Same here, Ive got 3 D's all with the 48" deck and .... well, without going out in the rain and checking more closely, that one sure looks like my 48's Share this post Link to post Share on other sites
MikeBhardware 1 #8 Posted April 23, 2020 Yes I have a 48 now just looking to see if anyone has put a 60 on one. Share this post Link to post Share on other sites
pfrederi 17,674 #9 Posted April 23, 2020 WH sold a 3pt 60" finish mower for you tractor. Was actually made by Woods Share this post Link to post Share on other sites
MikeBhardware 1 #10 Posted April 23, 2020 Yes I saw that, I'm looking to put a mid mount 60 on the tractor I am aware it was not available from wheel horse just curious if anyone had done it and had some insight on what was done to do it. Share this post Link to post Share on other sites
"D"- Man 827 #11 Posted April 23, 2020 O.K. I stand corrected. I only was able to find a post by Kelly, "fitting a deck on a D" Posted April 26 2012 Share this post Link to post Share on other sites
MikeBhardware 1 #12 Posted April 23, 2020 Lol no problem thanks for trying Share this post Link to post Share on other sites
