WHNJ701 4,165 #2 Posted April 18, 2020 a few years ago on another site someone made a pull behind gang mower out 5 push mowers and pulled with an atv. 2 Share this post Link to post Share on other sites
squonk 41,020 #3 Posted April 18, 2020 Awesome how they got the exhaust away from the other carb! Share this post Link to post Share on other sites
WHNJ701 4,165 #4 Posted April 18, 2020 Just now, squonk said: Awesome how they got the exhaust away from the other carb! maybe an issue with the prototype blowing up 1 Share this post Link to post Share on other sites
scottbrucea 91 #5 Posted April 18, 2020 My daughter found this on Facebook, caption included. It’s not intended to offend anyone. Share this post Link to post Share on other sites
Ed Kennell 38,022 #6 Posted April 18, 2020 Interesting, but without the blades overlapping, it has to leave a uncut streak in the middle. If I were going to this much work, I would have used a typical three blade staggered overlapping design with all three decks turned for rear discharge. Of course it would have to be self propelled by a fourth engine pulling a sulky. Hmmm, possible covid lock down project? 2 Share this post Link to post Share on other sites
wallfish 16,984 #7 Posted April 18, 2020 (edited) Get on it Ed! Show'm how it's done. A few years ago at the big show a few of us were discussing building customs. It was late in the day and we were drink'n too so I wanted to just drive an attachment. No tractor just the attachment so I bought a small round WH deck from one of those little vertical engine mowers. A snow blower is too heavy. Never did get around to building it but maybe there's some time to do it now. Redneck junkyard wars. Edited April 18, 2020 by wallfish 1 1 Share this post Link to post Share on other sites
roadapples 6,983 #8 Posted April 18, 2020 Double wide... 1 hour ago, scottbrucea said: It’s not intended to offend anyone. I take it as a compliment.... 4 Share this post Link to post Share on other sites
