Plow bracket for 73 no name

[gt14rider 749]

Can someone please help me with this. I need dementions for this type of plow bracket for a 73 no name. Any help would be appreciated 

[ebinmaine 67,309]

I'd be happy to help but won't be in the shop til Saturday

[The Tuul Crib 7,336]

Are you wanting to know if this one 

will fit the no name?

[gt14rider 749]

Thank you sir, I ain't going nowhere,  something to do, trying to keep busy

[gt14rider 749]

It should fit,  104659 . Need measurements to build my own.

[ebinmaine 67,309]

Outside

 

 

 

 

 

[ebinmaine 67,309]

 

 

 

[ebinmaine 67,309]

Center to center measurement of the bolt holes appears to be 2.5"

 

 

 

If you need anything else don't hesitate to ask.

[gt14rider 749]

Thanks again,  this should be good for now, 

[WVHillbilly520H 10,373]

I built one a while back and also made my own locking keys wish I could find my post with blueprints.

Found my thread back in Nov 2016 no blue print for this bracket as I just copied the one I had on hand what I did have a blueprint for was snow plow skid shoes... 

 

Edited April 5, 2020 by WVHillbilly520H

[WVHillbilly520H 10,373]

On 4/2/2020 at 4:09 PM, gt14rider said:

Can someone please help me with this. I need dementions for this type of plow bracket for a 73 no name. Any help would be appreciated 

Maybe this thread will inspire you even more post #32 ... 

 

[gt14rider 749]

Nice job, thinking on the duels, mybe one for 856 and the 73 nn

[gt14rider 749]

Got a question on the bracket. Read on here about a spacer block to lower brackets, for clearance up front for plow to clear. Question is what size is the spacer.  Can't find the post.   Thanks

[ebinmaine 67,309]

8 hours ago, gt14rider said:

Got a question on the bracket. Read on here about a spacer block to lower brackets, for clearance up front for plow to clear. Question is what size is the spacer.  Can't find the post.   Thanks

@WVHillbilly520H I think participated in that... 

Perhaps Jeff can post sizes.

[WVHillbilly520H 10,373]

2 hours ago, ebinmaine said:

@WVHillbilly520H I think participated in that... 

Perhaps Jeff can post sizes.

I think I have an extra set that may be the easiest way to go... 

But 1" (plus) thick sqaure , 3" long ,same bolt spacing and holes as your plow bracket will give you approximately 2" (+/-) height under blade bottom at full lift. Oh and they don't have to be solid can be square tubing of at least 1/8 wall.

Edited April 26, 2020 by WVHillbilly520H

[gt14rider 749]

Thanks, so I was thinking,(smell the  wood burning) if I make the bracket 4" instead of 3" that would eliminate the spacer. 

[WVHillbilly520H 10,373]

7 hours ago, gt14rider said:

Thanks, so I was thinking,(smell the  wood burning) if I make the bracket 4" instead of 3" that would eliminate the spacer. 

Yes you could do that as well.

[Lee1977 6,648]

I built mine 3 3/4" deep, It's either 5/16" or 3/8" thick that"s what size angle I had. Did cut some of the width off at the top.

[gt14rider 749]

Question,  on the 73 no name,there is lift arm 7-56in pic. Does 7-58 and 7- 59 get replaced with 12" lift linkage or does link go from lift handle to plow?

[ebinmaine 67,309]

I have NONE of the red circle items.

My link is 11.5 to 12" solid and goes from handle to plow directly.

 

[gt14rider 749]

Does anyone know what that linkage circled in red is for? Mower deck?

[Lee1977 6,648]

4 hours ago, gt14rider said:

Does anyone know what that linkage circled in red is for? Mower deck?

Yes

[ebinmaine 67,309]

Yepp..

[WVHillbilly520H 10,373]

And any other mid mount implements that you want to "float" while engaged on the ground.

[gt14rider 749]

She ain't pretty but she works,