B J 23 #1026 Posted September 12, 2021 Just a pair 10 6 Share this post Link to post Share on other sites
Lane Ranger 10,968 #1028 Posted September 13, 2021 7 5 Share this post Link to post Share on other sites
cafoose 3,355 #1029 Posted September 13, 2021 @WheelPuke 4 5 1 Share this post Link to post Share on other sites
Stormin 9,981 #1030 Posted September 13, 2021 Not one of mine, belongs to a fellow vintage club member. 6 6 Share this post Link to post Share on other sites
ebinmaine 67,498 #1031 Posted September 13, 2021 2 minutes ago, Stormin said: Not one of mine, belongs to a fellow vintage club member. Interesting adaptation on the seat and bracket. Well done. Perhaps a taller person? 1 1 Share this post Link to post Share on other sites
Stormin 9,981 #1032 Posted September 13, 2021 Just now, ebinmaine said: Perhaps a taller person? Nope! That's him in the back ground. 1 Share this post Link to post Share on other sites
ebinmaine 67,498 #1033 Posted September 13, 2021 4 minutes ago, Stormin said: Nope! That's him in the back ground. Ahh ... Now I see the pedal too. I like it. Share this post Link to post Share on other sites
AMC RULES 37,130 #1034 Posted September 13, 2021 Jim&Patti's M&G N. Berwick Maine 9/11/2021 3 14 2 Share this post Link to post Share on other sites
ebinmaine 67,498 #1035 Posted September 13, 2021 @AMC RULES Nicely done brother man 2 1 Share this post Link to post Share on other sites
Maxwell-8 4,275 #1036 Posted September 18, 2021 3 8 2 Share this post Link to post Share on other sites
Sparky-(Admin) 21,318 #1037 Posted September 18, 2021 8 6 Share this post Link to post Share on other sites
Rusty Tinsnips 477 #1038 Posted September 18, 2021 Junk cherry trees always falling apart. I made it 7 feet 4 inches before it all came out of the wagon. 2 6 Share this post Link to post Share on other sites
Sparky-(Admin) 21,318 #1039 Posted September 18, 2021 308 got some love today..carb dismantled cleaned and reassembled…fuel pump rebuilt with parts from ISAVETRACTORS, And a full test by mowing the yard 5 7 Share this post Link to post Share on other sites
Ifixoldjunk 778 #1040 Posted September 19, 2021 It’s been a productive weekend with the old Dixie horse 310-8. Hauled close to 500lbs of gravel and mowed down some old pathways in the woods. Figure it’s about time to start hauling firewood around so might as well clear the trails. these wheel horses continue to do nothing but impress me 1 5 Share this post Link to post Share on other sites
Ifixoldjunk 778 #1041 Posted September 19, 2021 18 hours ago, Sparky said: 308 got some love today..carb dismantled cleaned and reassembled…fuel pump rebuilt with parts from ISAVETRACTORS, And a full test by mowing the yard Thank god for websites like ISAVETRACTORS. It’s helped fuel my wheel horse addiction for a while now🤣 Share this post Link to post Share on other sites
ebinmaine 67,498 #1042 Posted September 19, 2021 7 minutes ago, Ifixoldjunk said: these wheel horses continue to do nothing but impress me Same here. Couple years ago I set to pull a small tree over with the Cinnamon Horse C160. Tightened up the pull rope. Started forward ready to stop and reset the whole time. Went all the way I was going and then some.... Then.... I realized I hadn't even set the idle to full speed. Torque. Monster. 1 Share this post Link to post Share on other sites
Sparky-(Admin) 21,318 #1043 Posted September 19, 2021 6 minutes ago, Ifixoldjunk said: Thank god for websites like ISAVETRACTORS. It’s helped fuel my wheel horse addiction for a while now🤣 Yep! Brought my 308 back to life for the cost of a fuel pump kit ($9.99) 1 Share this post Link to post Share on other sites
Ifixoldjunk 778 #1044 Posted September 19, 2021 8 minutes ago, ebinmaine said: Same here. Couple years ago I set to pull a small tree over with the Cinnamon Horse C160. Tightened up the pull rope. Started forward ready to stop and reset the whole time. Went all the way I was going and then some.... Then.... I realized I hadn't even set the idle to full speed. Torque. Monster. I don’t think I’ve ever needed more than half idle to pull anything. They have some insane torque. 1 Share this post Link to post Share on other sites
ebinmaine 67,498 #1045 Posted September 19, 2021 2 hours ago, Ifixoldjunk said: I don’t think I’ve ever needed more than half idle to pull anything. They have some insane torque. I normally run about 1/2 to 3/4 throttle. That engine in fact is set low on the max RPM screw. Should be 3600 or so. I keep it around 3200, 3300. I don't run any engine driven implements except a chipper and it prefers a little lower than full rpm anyhow. Just keep in mind being air cooled and oil splash lubed these engines should never be run below 1/2 throttle or a little more for the sake of longevity. 1 Share this post Link to post Share on other sites
Jennifer 1,877 #1046 Posted September 19, 2021 (edited) Got this tractor had no decals and the front wheel horse wasn’t painted. Decals from redo your horse. Nice Quality. The thumb screws for the hood had bolts but we were able to get some reproduction thumb screws later on eBay and I have since been put on Edited September 19, 2021 by Jennifer 9 5 Share this post Link to post Share on other sites
Jennifer 1,877 #1047 Posted September 19, 2021 Rusty didn’t want left out! 5 5 2 Share this post Link to post Share on other sites
Pullstart 62,878 #1048 Posted September 20, 2021 Nice to see you still having a whole bunch of fun @Jennifer! 1 Share this post Link to post Share on other sites
AMC RULES 37,130 #1049 Posted September 20, 2021 (edited) A little Wheel-Horse mood lighting. Edited September 21, 2021 by AMC RULES 5 3 Share this post Link to post Share on other sites
Sam Pasch 449 #1050 Posted September 21, 2021 On 9/18/2021 at 9:41 AM, Sparky said: A fellow 867 owner! 1 1 Share this post Link to post Share on other sites
