Side shot Saturday... AND SUNDAY !

[rjg854 11,361]

She has her priorities , perfect.

[JCM 9,157]

This was Thursday before the disappearing snow act, or at least 80% of it. And yes @Sparky the Brook is passable, way easier than snowshoes to get to the cabin. Good call.      

[ebinmaine 67,464]

1 hour ago, JCM said:

disappearing snow

Whaddya got left?

Our 16" storm is most gone. 

[Gregor 4,846]

While the Predator engine did work well, I think this one just looks better. I need to find some sort of fuel tank that will fit under the seat pan, and install either a mechanical or electric fuel pump. I also installed a seat I had on hand.

[ebinmaine 67,464]

8 minutes ago, Gregor said:

fuel tank that will fit

What about the stock location on the shelf?

[Gregor 4,846]

The original Tecumseh engine had the fuel tank mounted right on it. The shelf directly behind the engine might work, but there isn't much clearance there with the hood on. The small bottom tray is for the battery. I am trying to come up with an option that doesn't require drilling any holes.

[JCM 9,157]

2 hours ago, ebinmaine said:

Whaddya got left?

Our 16" storm is most gone. 

Still some out back in the woods where the sun don't shine and the 4' which were 7' high piles left over from snow removal up along the driveway.

[ebinmaine 67,464]

31 minutes ago, Gregor said:

The original Tecumseh engine had the fuel tank mounted right on it. The shelf directly behind the engine might work, but there isn't much clearance there with the hood on. The small bottom tray is for the battery. I am trying to come up with an option that doesn't require drilling any holes.

That's where it would have been if it had a Kohler originally

 

 

 

 

 

[Gregor 4,846]

I think I have one of those, but it has a hole in it. Well 3 holes actually, and it is really bad inside.

[ebinmaine 67,464]

43 minutes ago, Gregor said:

I think I have one of those, but it has a hole in it. Well 3 holes actually, and it is really bad inside.

I've got one that has the outlet nearer the end but I now you're not wanting to drill extra holes. 

It's yours for shipping if you're interested. 

 

Otherwise you can call Lincoln at A to Z Tractor in PA. 

 

 

[Gregor 4,846]

Thanks, but I have not given up on the H70 quite yet. I won't do anything drastic unless it is dead.

[ebinmaine 67,464]

39 minutes ago, Gregor said:

Thanks, but I have not given up on the H70 quite yet. I won't do anything drastic unless it is dead.

I admire your incredible persistence. 

 

 

 

Just had a thought.....

Is there a thing like could it be the wrong flywheel or anything?

I know it ran for a bit...

 

 

[Lee1977 6,658]

Quit wasting your time with the H 70. You'll have a lot less trouble with a Kohler.

Edited December 27, 2020 by Lee1977

[Gregor 4,846]

 

26 minutes ago, Lee1977 said:

Quit wasting you time with the H 70. You'll have a lot less trouble with a Kohler.

And just what would I do with my time? Watch my neighbors chickens? Besides, it's become a personal thing.

43 minutes ago, ebinmaine said:

I admire your incredible persistence. 

 

 

 

Just had a thought.....

Is there a thing like could it be the wrong flywheel or anything?

I know it ran for a bit...

 

 

I really don't know. I know it had the wrong motor shroud on it when I got it. It originally had a spark plug in it the size of a small pine tree.  I know it seems odd, but when I spin it with my drill, turning off all the lights, I have good spark with my spark tester at low rpm. At high rpm, I have no spark. The points are new, but that doesn't always mean anything. I kind-a wish there was someone else here to witness it.  I put the condenser on from my K161, didn't hep. All I can do is wait for the new ignition parts I have ordered.

 

Edit.  There are 2 Tecumseh motors for sale on Facebook, right in my hometown. Surely I can't be that stupid.

Edited December 26, 2020 by Gregor

[ebinmaine 67,464]

31 minutes ago, Gregor said:

Tecumseh motors for sale

Once you figure out what makes em tick you may even like it. 

Maybe if one is currently running well you reverse engineererize it. 

[Gregor 4,846]

On 12/26/2020 at 11:44 AM, ebinmaine said:

That's where it would have been if it had a Kohler originally

 

 

If anyone could tell me the patr number for that gas tank, I would like to find one. Thanks Greg

 

 

 

 

[ebinmaine 67,464]

@Gregor

Part number for something like that might not matter much because there were slight variances and they haven't even been used on a Horse since about 1968 or 9.

 

Best bet is to either put an ad in our wanted section, call Lincoln at a to z, or both.

 

 

[Gregor 4,846]

I tried to get one from Lincoln. He does not have that exact style. He sent me the tank that is on it now.

[Pullstart 62,849]

OH WHAT FUN IT IS TO RIDE A SENIOR ON SATURDAY!

 

 

[ebinmaine 67,464]

10 minutes ago, pullstart said:

SENIOR

Niiiice photo enhancement!

[Oldskool 6,644]

5 minutes ago, ebinmaine said:

Niiiice photo enhancement!

X2

[Oldskool 6,644]

@pullstart does that Senior have a clutch in the bell housing or is it in the drop from the transmission output shaft?

[Pullstart 62,849]

45 minutes ago, ebinmaine said:

Niiiice photo enhancement!

 

37 minutes ago, Oldskool said:

X2

Mrs. P. Got a new IPhone 12.  It has a very nice camera.

[Pullstart 62,849]

9 minutes ago, Oldskool said:

@pullstart does that Senior have a clutch in the bell housing or is it in the drop from the transmission output shaft?

It’s in the bell housing.  Ford Model A stuff, I believe.  @oldiron613’s lever steer clutch you push to go, lift to stop.  This one, it’s like a vehicle.

[Sparky-(Admin) 21,315]

Might be getting an inch or two or three tonight....I’m ready.