WVHillbilly520H 10,373 #476 Posted December 1, 2020 16 hours ago, Horse Newbie said: @Big Red Work Horse I am seriously considering one if things work out with my 94 previously owned 520H...need to drive her for a while to have time to do a full shakedown. Thanks ! 22 years without it, and I even owned an xi for a bit I personally didn't care for the foot pedal on it felt very awkward to me now on a sub compact 4wd with the side by side pedals vs the toe/heel rocker I am completely fine with that set up again personal preference here. 1 Share this post Link to post Share on other sites
Horse Newbie 7,071 #477 Posted December 2, 2020 (edited) 7 hours ago, WVHillbilly520H said: 22 years without it, and I even owned an xi for a bit I personally didn't care for the foot pedal on it felt very awkward to me now on a sub compact 4wd with the side by side pedals vs the toe/heel rocker I am completely fine with that set up again personal preference here. What I'll do is use the 520 H in the spring/ a little this winter , after adjusting that eccentric nut you were telling me about to get a good feel for the lever control...then most likely leave it factory. I think it will be fine when I get used to it. And besides I'm more often than not to keep my toys original when I can. Edited December 2, 2020 by Horse Newbie Share this post Link to post Share on other sites
8ntruck 7,014 #478 Posted December 2, 2020 @12Horse Paladin - I kind of like the red rims on that tractor. It's different. Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #479 Posted December 2, 2020 8 hours ago, Horse Newbie said: What I'll do is use the 520 H in the spring/ a little this winter , after adjusting that eccentric nut you were telling me about to get a good feel for the lever control...then most likely leave it factory. I think it will be fine when I get used to it. And besides I'm more often than not to keep my toys original when I can. Its your rig do as you want, I was just stating what worked best for me, most people prefer the pedal which was an option, but I learned to basically operate this machine "feet free". 1 Share this post Link to post Share on other sites
Horse Newbie 7,071 #480 Posted December 3, 2020 15 hours ago, WVHillbilly520H said: Its your rig do as you want, I was just stating what worked best for me, most people prefer the pedal which was an option, but I learned to basically operate this machine "feet free". @WVHillbilly520H so it was a factory option ?... I thought they were only made by the fellow on Red Square who makes the conversion kit. Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #481 Posted December 3, 2020 7 hours ago, Horse Newbie said: @WVHillbilly520H so it was a factory option ?... I thought they were only made by the fellow on Red Square who makes the conversion kit. Copied from the original O.E. kit i believe. 1 Share this post Link to post Share on other sites
Horse Newbie 7,071 #482 Posted December 3, 2020 8 hours ago, WVHillbilly520H said: Copied from the original O.E. kit i believe. Thanks. @WVHillbilly520H 1 Share this post Link to post Share on other sites
Sparky-(Admin) 21,318 #483 Posted December 5, 2020 Same ol’ tractor... 5 1 1 Share this post Link to post Share on other sites
JCM 9,174 #484 Posted December 5, 2020 Long gone but not forgotten. 6 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,596 #486 Posted December 5, 2020 Waiting patiently... How ‘bout you send some of your snow our way @ebinmaine...?!?! 6 1 Share this post Link to post Share on other sites
ebinmaine 67,562 #487 Posted December 5, 2020 1 minute ago, SylvanLakeWH said: Waiting patiently... How ‘bout you send some of your snow our way @ebinmaine...?!?! You can have all of it if you want 1 1 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,596 #488 Posted December 6, 2020 5 minutes ago, ebinmaine said: You can have all of it if you want Excellent! Put it in the mail! 4 Share this post Link to post Share on other sites
JCM 9,174 #489 Posted December 6, 2020 At least it's not 20 plus inches. 5 Share this post Link to post Share on other sites
ebinmaine 67,562 #490 Posted December 6, 2020 20 minutes ago, SylvanLakeWH said: Excellent! Put it in the mail! I'll consult my Packaging And Distribution Department and we'll be in touch. 1 2 Share this post Link to post Share on other sites
Oldskool 6,644 #491 Posted December 6, 2020 Just now, ebinmaine said: I'll consult my Packaging And Distribution Department and we'll be in touch. How much snow have you goten? Share this post Link to post Share on other sites
JCM 9,174 #492 Posted December 6, 2020 Couple of 400 Series helping around the yard last week. 4 Share this post Link to post Share on other sites
Gregor 4,846 #493 Posted December 6, 2020 C-141, just completed. 656, a work in progress. 2 4 Share this post Link to post Share on other sites
ebinmaine 67,562 #494 Posted December 6, 2020 Just now, JCM said: Couple of 400 Series helping around the yard last week. Them are pretty and all but you need you a 70s C-series winter project. 1 Share this post Link to post Share on other sites
ebinmaine 67,562 #495 Posted December 6, 2020 13 minutes ago, Oldskool said: How much snow have you goten? Bout 5" of slushy cement out there right now. Power's been off an on since 2 or so. Judging by these birches which have NEVER been this bowed well have more outages. 2 Share this post Link to post Share on other sites
Oldskool 6,644 #496 Posted December 6, 2020 3 minutes ago, ebinmaine said: Bout 5" of slushy cement out there right now. Power's been off an on since 2 or so. Judging by these birches which have NEVER been this bowed well have more outages. Oh ya...... That doesnt look good at all 1 Share this post Link to post Share on other sites
JCM 9,174 #497 Posted December 6, 2020 8 minutes ago, ebinmaine said: Them are pretty and all but you need you a 70s C-series winter project. A nice clean C- 160 Hydro would be nice, just no more storage room. 1 Share this post Link to post Share on other sites
ebinmaine 67,562 #498 Posted December 6, 2020 Just now, Oldskool said: Oh ya...... That doesnt look good at all Trina shook ends of that low Branch off and it went up some. Wouldn't be a national emergency but I'd rather not chop that tree. It's one of only a handful we left near the building.. Share this post Link to post Share on other sites
SylvanLakeWH 25,596 #499 Posted December 6, 2020 17 minutes ago, JCM said: Couple of 400 Series helping around the yard last week. Nice looking herd! 1 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,596 #500 Posted December 6, 2020 17 minutes ago, Gregor said: C-141, just completed. 656, a work in progress. Both look great! Nice job on the C 141! 2 Share this post Link to post Share on other sites
