Side shot Saturday... AND SUNDAY !

[8ntruck 7,006]

By Gravely muffler, I mean the ones shown in the jungle site that are meant for Gravely applications.  The Nelson catalog shows a similar muffler.

[Sparky-(Admin) 21,318]

  My normally shiniest and newest machine got dirty today! Father-in-law is not well so I hauled it over to his place to mow his yard.. or should I say sandpit  . He’s not big into his lawn and it’s more weeds and sand than it is grass. 
  The 315-8 got a well deserved bath when I got back home 

 

[Lee1977 6,661]

7 minutes ago, Sparky said:

  My normally shiniest and newest machine got dirty today! Father-in-law is not well so I hauled it over to his place to mow his yard.. or should I say sandpit  . He’s not big into his lawn and it’s more weeds and sand than it is grass. 
  The 315-8 got a well deserved bath when I got back home 

 

I bet you looked like Pig Pen on a Wheel Horse with that cloud of dust following you around.

[Sparky-(Admin) 21,318]

22 hours ago, Mike C160 said:

 

Where did you get that muffler from if you dont mind me asking. Looks like it might be a good answer.

Do you think it would flow enough for the 16 horse K341?

 

@Mike C160 

  Sorry but there are no markings on these mufflers. They do fit a 1” pipe.

 

 

 

 

[D_Mac 8,619]

1075 and the dump cart I bought from a junk man for 10 bucks

[Mike C160 251]

11 hours ago, Sparky said:

@Mike C160 

  Sorry but there are no markings on these mufflers. They do fit a 1” pipe.

 

 

 

 

 

Thanks for the update, much appreciated.

 

Did you see this link? > Muffler for Kohler Tecumseh Fits Briggs and Stratton Reversible Inlet / Outlet | eBay

 

Think this is the one??

 

Cheers!

[ebinmaine 67,510]

19 minutes ago, Mike C160 said:

 

Thanks for the update, much appreciated.

 

Did you see this link? > Muffler for Kohler Tecumseh Fits Briggs and Stratton Reversible Inlet / Outlet | eBay

 

Think this is the one??

 

Cheers!

Without having them Side by each to make careful measurements it's impossible to say that's the exact one but I'm pretty comfortable saying if you order it that it would work.

 

Just an fyi, that muffler is available for about 10 bucks less on the flea Bay from another seller.

 

I've used those on a couple different machines. They have a fairly decent deep tone and our relatively quiet for a flat head single cylinder.

 

[Sparky-(Admin) 21,318]

1 hour ago, Mike C160 said:

 

Thanks for the update, much appreciated.

 

Did you see this link? > Muffler for Kohler Tecumseh Fits Briggs and Stratton Reversible Inlet / Outlet | eBay

 

Think this is the one??

 

Cheers!

 Looks the same. The one in the pictures appears to have a manufacturers name on it where mine has nothing. 

[Jennifer 1,877]

3 hours ago, D_Mac said:

1075 and the dump cart I bought from a junk man for 10 bucks

Any before pictures!  I am assuming you didn’t get it like that for $10.

[D_Mac 8,619]

1 hour ago, Jennifer said:

Any before pictures!  I am assuming you didn’t get it like that for $10.

Oh I just got the dump cart for 10 bucks. I put tubes in tires. I didn't get the 1075 for 10. Here is a before after anyway

[Tractorhead 9,064]

That Mowerdeck looks extremely Hot in combination with the Tracta.

 

Dang Cool 👍👍👍

Edited May 11, 2022 by Tractorhead

[ebinmaine 67,510]

For today's sideshot, you folks get a view of my Mckissick chipper 

 

 

[sjoemie himself 3,068]

1 hour ago, ebinmaine said:

Mckissick chipper 

 

Do you have that working on a Wheel Horse and if yes, is there a topic about it?

[ebinmaine 67,510]

7 minutes ago, sjoemie himself said:

 

Do you have that working on a Wheel Horse and if yes, is there a topic about it?

I do. 

 

It's mentioned a few times here on the site.  

Scroll down for a thread from when I first got it mounted and running. 

 

Note the small twigs I was putting in. 

The side input will accept up to around a (3"?) diameter stick. 

We've since figured out that it'll absolutely demolish any soft wood we put in it. 

Hardwoods close. Just have to be slower.  

 

This thing is an ABSOLUTE BEAST and everyone should get one!!

 

 

I've been having issues getting proper belt alignment. 

May have leaned a little toward fixing that. 

 

 

Soon I'll be adding 5 lug trailer hubs and 6-12 AG tires to the front to get the behemoth up off the ground more.   

 

[sjoemie himself 3,068]

Excellent, thanks! I put your YouTube vid up on my big screen. Chipper seems to work goood! 👌🏻

Also like your safety attire 

[Sparky-(Admin) 21,318]

I know…it’s Wednesday  . Awoke this one today from its 8 month nap in the shed

 

[ebinmaine 67,510]

44 minutes ago, sjoemie himself said:

safety attire

Believe it or not that's on purpose. 

 

DO NOT wear gloves!! 🚫 🧤. Particularly feeding the top.  WOW. 

 

DO NOT wear loose clothing. 

Preferably short sleeves. 👕

 

[ebinmaine 67,510]

14 minutes ago, Sparky said:

this one

Later Magnum on that?

[Sparky-(Admin) 21,318]

25 minutes ago, ebinmaine said:

Later Magnum on that?

Nope, it’s a factory replacement K series block. 

[Mike C160 251]

14 hours ago, Sparky said:

 Looks the same. The one in the pictures appears to have a manufacturers name on it where mine has nothing. 

 

You took your muffler off? How come? 

[Sparky-(Admin) 21,318]

5 hours ago, Mike C160 said:

 

You took your muffler off? How come? 

  I have two…the one you see me holding in the pics and the one that’s mounted on the tractor with the stack. Both identical mufflers. 

[Jennifer 1,877]

On 5/9/2022 at 11:10 AM, Handy Don said:

I can't tell for sure, but it looks like the fenders are on backward. The seat spring should curve forward and then up and the lift cable should be under the left side of the tool box.

Put the 854’s beside each other and they both match directions!  Picture I think was playing an illusion!!  It was worth double checking though.  Thanks!

[Kevin Bowley 130]

First time getting it dirty since restore.  Grading the driveway and getting covered in dust. Love the decals from @vinylguy. The bottom picture is from the day I brought it home.

Edited May 13, 2022 by kbowley

[Sparky-(Admin) 21,318]

Old and new in the same shot 
 

[JPWH 6,034]