squonk 41,111 #1301 Posted December 19, 2021 The Leaf King! 2 Share this post Link to post Share on other sites
Jeff-C175 7,202 #1302 Posted December 19, 2021 Saw a guy plowing leaves the other day. He was on a commercial ZT with what looked like a plywood box plow on the front. I shoulda stopped and took a pic cuz it was quite a sight. The leaves were piled up so high in front and around and on top of him that all you could see was his head sticking out the top of the pile! I went real slow so's I could see what was goin' on in my rear view. 2 1 Share this post Link to post Share on other sites
Sparky-(Admin) 21,317 #1303 Posted December 19, 2021 Hauling wood out to the side of the road with my 308 9 2 Share this post Link to post Share on other sites
ebinmaine 67,496 #1304 Posted December 19, 2021 6 5 Share this post Link to post Share on other sites
Andy N. 2,154 #1305 Posted December 19, 2021 Hangin with St. Nick! 7 4 2 1 Share this post Link to post Share on other sites
Horse Newbie 7,069 #1308 Posted December 19, 2021 3 hours ago, Sparky said: Hauling wood out to the side of the road with my 308 Why are you putting it at the side of the road ? Share this post Link to post Share on other sites
AMC RULES 37,130 #1309 Posted December 19, 2021 4 1 Share this post Link to post Share on other sites
Sparky-(Admin) 21,317 #1310 Posted December 20, 2021 1 hour ago, Horse Newbie said: Why are you putting it at the side of the road ? For people to come and get it. I put a post on Facebook on the Freebie page for my town and it’s usually gone in an hour or two. 4 Share this post Link to post Share on other sites
Horse Newbie 7,069 #1311 Posted December 20, 2021 6 minutes ago, Sparky said: For people to come and get it. I put a post on Facebook on the Freebie page for my town and it’s usually gone in an hour or two. Nice !… Helping others out ! 1 1 Share this post Link to post Share on other sites
Sparky-(Admin) 21,317 #1312 Posted December 25, 2021 Merry Christmas ya’ll! My house is full of sleepy heads so I’m taking the opportunity to scroll thru RedSquare before they wake up 10 4 Share this post Link to post Share on other sites
c-series don 8,707 #1313 Posted December 25, 2021 (edited) Ha!ha! Me too! Edited December 25, 2021 by c-series don 7 3 1 Share this post Link to post Share on other sites
JCM 9,165 #1314 Posted December 25, 2021 A lot of cleaning, painting, wiring, flushing, lubing, replacing worn out fastners, battery, fuel shutoff and lines, front wheel bearings, hardware and armrests recovered with leather when a new addition to the herd shows up. All worth it when the time comes to throw a leg over it and get some seat time. In the Spring carb and starter need attention and should be ready for the 4th annual Meet & Greet in September 2022. When the next owner comes along it will probably need nothing but love, that which it deserves. 7 4 1 Share this post Link to post Share on other sites
Gregor 4,846 #1316 Posted December 26, 2021 39 minutes ago, dola12 said: That is a beautiful tractor, and it prompts a question about hydraulics, of which I know nothing. Can hydro be tapped into to run such an attachment or any other hydraulic implement? A cylinder? Hydro motor? Or is another separate pump and reservoir required? 1 Share this post Link to post Share on other sites
dola12 116 #1317 Posted December 26, 2021 I will try to shed some light on this .... The previous owner explained this was a johnson loader trip bucket, as there are no controls to operate the bucket ...just the up and down is controlled by the hydraulics ....which has been adapted to run off the mule out front , to a pump underneath the tractor ...which appears to be a sub frame made out of a plow frame ...sort of a frankenstein setup ....Ive started to change up the bucket a bit still keeping it a trip set up... until i have the time and means to build a new sub frame ...relocate the pump and add some pistons for the bucket... 3 Share this post Link to post Share on other sites
dola12 116 #1318 Posted December 26, 2021 Just need some time at work to finish the fabrication of the bucket to get in back working… then I’ll work on the rest at a later date 3 3 Share this post Link to post Share on other sites
SylvanLakeWH 25,557 #1319 Posted December 26, 2021 Another Christmas train ride in the books… 11 4 Share this post Link to post Share on other sites
D_Mac 8,618 #1320 Posted December 27, 2021 Both sides of the 500 Special I brought back to life. The little Lawn Ranger and the 857. All gone but not forgotten. 8 Share this post Link to post Share on other sites
whtractors24 3,116 #1321 Posted December 27, 2021 1 7 Share this post Link to post Share on other sites
dola12 116 #1322 Posted December 30, 2021 On 12/26/2021 at 3:56 PM, dola12 said: Just need some time at work to finish the fabrication of the bucket to get in back working… then I’ll work on the rest at a later date Getting closer 😁 6 3 Share this post Link to post Share on other sites
D_Mac 8,618 #1325 Posted January 2, 2022 875 and 857 and Jeffrey who loves to go for rides. When he isn't riding in the back he is biting the tires 1 1 1 1 Share this post Link to post Share on other sites
