hotajax 223 #1 Posted March 15, 2020 (edited) TITAN SCREW DRIVER SET; They've been selling this set of 25 different screwdrivers for $15 when it goes on sale. It is a very complete set. Even has the micro-sized precision screwdrivers. As with anything from Costco, if you don't like it, you can return it for a full refund. I needed a very small screwdriver to adjust the carb on a chainsaw, and the kit had it. I have really torture-tested some of the more standard sizes and they hold up well. I have yet to put them to the ultimate torture test: banging off an axle dust cap with a hammer. Made of CR-V blades, hexagonal shafts so you can get a wrench on them, magnetic tips, comfort grip handles, a lifetime warranty, and an 800 number on the package if something breaks. It was a good find for me, especially because the kid takes tools and doesn't return them without hassling him. BTW, when I need to look for my tools most of them are hanging around his reloading stuff. Edited March 15, 2020 by hotajax 3 1 Share this post Link to post Share on other sites
Pullstart 63,112 #2 Posted March 15, 2020 I have a very large assortment of screw drivers and most of the flat heads are bent (pry bars) or snapped tips (chisels). I have a really old craftsman flat head that I was using the handle as a hammer the other day and the handle snapped right in half. Oops! It may be time to work on an upgraded set some day... 3 Share this post Link to post Share on other sites
hotajax 223 #3 Posted March 15, 2020 Oh, lets just face it: Screwdrivers were meant to be abused. 3 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,998 #4 Posted March 15, 2020 I used a screwdriver to drive a screw once... I think... 1 1 Share this post Link to post Share on other sites
Pullstart 63,112 #5 Posted March 15, 2020 3 hours ago, SylvanLakeWH said: I used a screwdriver to drive a screw once... I think... I don’t get it? Share this post Link to post Share on other sites
SylvanLakeWH 25,998 #6 Posted March 15, 2020 8 minutes ago, pullstart said: I don’t get it? I use them for chisels, pry bars, can openers, mixing drinks, etching tools, tent stakes, hammers... etc... Rarely for screws... that’s what my Milwaukee driver is for... Capiche? 1 1 Share this post Link to post Share on other sites
hotajax 223 #7 Posted March 15, 2020 5 hours ago, SylvanLakeWH said: I used a screwdriver to drive a screw once... I think... I like this comment. Reminds me of that uneasy feeling I get when I see the little woman headed out to my tool box. 2 Share this post Link to post Share on other sites
tom2p 2,394 #8 Posted March 16, 2020 (edited) I have drawers of screwdrivers ( what I lack in ability I attempt to offset with capacity / inventory lol ) the better high quality screwdrivers I use to install and remove screws only older well used and lesser quality screwdrivers I use to pry, open, mix, scrape etc Edited March 16, 2020 by tom2p 1 Share this post Link to post Share on other sites
Cvans 1,009 #9 Posted March 16, 2020 When my youngest was into snowmobiles I would find tools in the spring with the lawn mower. Do you have any idea how far a rotary mower will throw a 9/16 wrench? 2 Share this post Link to post Share on other sites
