Ron A. 35 #1 Posted March 5, 2020 I read and read, called various local parts gurus and still can't find blades. I have a 36 inch rear discharge it was missing a blade and the bolt that holds it on when I got the Horse. The blade that was still on it was the left blade if the deck is down, right one was missing. The blade is 18 inches long, but it's not a flat blade like most 18 inch replacement blades I'm finding. Checked with various links on here and no good so far. It's a 67 867. I can't see the serial number on the deck because PO painted it over... Thanks. Share this post Link to post Share on other sites
WHX?? 48,767 #2 Posted March 5, 2020 (edited) Might be a RM-367?? Check this manual out. Se if a little paint thinner will get the paint off. Sounds like you are looking for a 4116?? Edited March 5, 2020 by WHX24 1 Share this post Link to post Share on other sites
WHX?? 48,767 #3 Posted March 5, 2020 If you can nail down the exact model and part number put a wanted ad in classifieds. Pretty common deck in the day and someone is going to have one. Guessing you tried A-Z tractors? 1 Share this post Link to post Share on other sites
Ron A. 35 #4 Posted March 5, 2020 Thanks for the help so far. Local Toro guys were able to cross reference with the numbers above and located the blades in their system, but they say 'unavailable' on their end so they're going to call and see if that means discontinued completely or just not available at this time. The washer and bolt for the blade are both unavailable as well. So. The blade set if available is $80.00. I don't wish to go all backyard mechanic here, but a standard 18 inch blade wouldn't work? I'd have to mount one upside down, but the blade that was on the deck are flush mount round holes Held with the bolt and washer. I mean what's the worst that can happen? It's rear discharge so all flying parts so go behind me lol... Share this post Link to post Share on other sites
WHX?? 48,767 #5 Posted March 5, 2020 Not sure if that would work Ron. The only 67 deck I had I gave to Mike @prondzy and never messed with it. Lots of guys mow with them yer so hopefully they'll chime in. 1 Share this post Link to post Share on other sites
prondzy 3,881 #6 Posted March 5, 2020 Blades are available on ebay do a little digging you can find them. I might have a decent used set PM me if your interested 2 Share this post Link to post Share on other sites
Ron A. 35 #7 Posted March 5, 2020 I'm waiting on a reply from an Ebay seller who has a couple of sets. Making sure they're 18". Thanks if that doesn't work out, I'll definitely Message you. Now for the bolt and dome washer...16 thread one inch. 1 Share this post Link to post Share on other sites
Ron A. 35 #8 Posted March 5, 2020 Man... I'm about this close to having two. Got someone local with another deck, cheaper than the cost of the replacement blades trying to sell me a 67 Raider 10 for $200 and my Wife is going to kick my a** up between my ears... 1 Share this post Link to post Share on other sites
WHX?? 48,767 #9 Posted March 5, 2020 You best go get that one … tell your wife it's a very rare tractor since Raiders didn't come out till '68! 2 1 Share this post Link to post Share on other sites
Lane Ranger 10,945 #10 Posted March 5, 2020 The original type gear driven 36 inch blades are getting harder to find. That is for sure! Some folks still have on their shelves and collectors probably have an extra set even if they never use the mower deck to mow with! Share this post Link to post Share on other sites
Ron A. 35 #11 Posted March 5, 2020 1 hour ago, WHX24 said: You best go get that one … tell your wife it's a very rare tractor since Raiders didn't come out till '68! This what he's trying to sell me he has a 812 and a 810 71 and 73 models and two 1967 raider10 Share this post Link to post Share on other sites
WHX?? 48,767 #12 Posted March 5, 2020 There is no such model numbers Ron. You need to go to confession. If the seller argues he needs to go too! The Reverend Parsons will now hear your sins and you are forgiven. For your penance you shall memorize the WH all years pdf and go get the aforementioned tractors and give them a home. Your wife says anything you are on a mission from God.... 1 1 Share this post Link to post Share on other sites
Ron A. 35 #13 Posted March 6, 2020 1 hour ago, WHX24 said: There is no such model numbers Ron. You need to go to confession. If the seller argues he needs to go too! The Reverend Parsons will now hear your sins and you are forgiven. For your penance you shall memorize the WH all years pdf and go get the aforementioned tractors and give them a home. Your wife says anything you are on a mission from God.... I was just showing ya what he said. I'm the first to admit I know nothing about all the models. I told him for $200 load it up I'll take it and I haven't heard another word. Found a set on Ebay, 16" not 18". So i'll probably buy a goat and tie it to the front... 2 Share this post Link to post Share on other sites
WHX?? 48,767 #14 Posted March 6, 2020 21 minutes ago, Ron A. said: So i'll probably buy a goat and tie it to the front... That ain't too far off base Ron... I wanted to get a goat and sell the mowers... that went over like a lead balloon with the missus... this is what I got....I says fine I'm buyin more horses then! 2 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,032 #15 Posted March 6, 2020 Pat's shows them still available 8014 BLADE KIT 52362 $53.03 https://www.psep1.biz/page.asp?page=home 5-2362 is one deck model they fit. If you go this route I think someone mentioned he has a flat rate for shipping so order anything else you need. Garry 2 Share this post Link to post Share on other sites
Ron A. 35 #16 Posted March 6, 2020 18 hours ago, gwest_ca said: Pat's shows them still available 8014 BLADE KIT 52362 $53.03 https://www.psep1.biz/page.asp?page=home 5-2362 is one deck model they fit. If you go this route I think someone mentioned he has a flat rate for shipping so order anything else you need. Garry Pat's is the Winner. Blades on the way, even had the blade bolts. Thanks... Share this post Link to post Share on other sites
