Maxie 9 #1 Posted February 27, 2020 Well I got the throttle cable working good but the choke cable is giving me a fit. I ran WD40 down it and its moving pretty good. It will choke but when I push the lever down it will not unchoke. I don't k now what to do. Which hole does the cable hook into in the handle? I have it in the lower hole. Do I need a new cable? Any help will be greatly appreciated. Thanks, Maxine. Share this post Link to post Share on other sites
rjg854 11,349 #2 Posted February 27, 2020 Could you help us out with so we can see what you've got going on. We could better diagnose that way. 1 Share this post Link to post Share on other sites
Maxie 9 #3 Posted February 27, 2020 I'll try to get one tomorrow. Thanks. 1 1 Share this post Link to post Share on other sites
Maxie 9 #4 Posted February 29, 2020 I figured out what was wrong and it's working fine now. Thanks. 1 Share this post Link to post Share on other sites
ebinmaine 67,266 #5 Posted February 29, 2020 8 hours ago, Maxie said: I figured out what was wrong and it's working fine now. Thanks. What turned out to be the issue? Share this post Link to post Share on other sites
rjg854 11,349 #6 Posted February 29, 2020 So happy you figured it out! Share this post Link to post Share on other sites
Maxie 9 #7 Posted March 1, 2020 The cable was slipping in the "u" shaped slot on the lever under the dash. It was bent just enough to let it slip.. I used pliers and squeezed it together and now it works fine. I got a new battery yesterday. I'm about ready to put the hood, seat, rear fender and tires on. It's been a long project but I've enjoyed it. 1 1 Share this post Link to post Share on other sites
ebinmaine 67,266 #8 Posted March 1, 2020 37 minutes ago, Maxie said: enjoyed The key word Share this post Link to post Share on other sites
