Oldskool 6,640 #51 Posted February 20, 2020 10 minutes ago, ebinmaine said: An interesting concept for sure. I've always found garden tractors with metal spoke wheels to be extremely interesting. I thought a lot about doing that on my current big build but I don't have the skills to build something like those yet and the rubber is more forgiving than the steel. Oh I love the look of steel spoked wheels on the smaller tractors. I was thinking if I was to make some I would start with the hoop of a big rig wheel. They are around 20" The old lock ring type and cut the edges off. Should have about 6 or 7" of width and then build from there Share this post Link to post Share on other sites
Oldskool 6,640 #52 Posted March 2, 2020 Well the wheels are finally here, with the original drop axle. I thought they had bushings in them but they have long roller bearings. That may be a plus. 1 Share this post Link to post Share on other sites
ebinmaine 67,309 #53 Posted March 2, 2020 41 minutes ago, Oldskool said: roller bearings As long as they're in decent shape it certainly shouldn't hurt anything 1 Share this post Link to post Share on other sites
Oldskool 6,640 #54 Posted July 19, 2020 Well I found out what to do with those wheels. Today project for the GT 1 3 Share this post Link to post Share on other sites
tarcoleo 119 #55 Posted July 19, 2020 (edited) Too late for suggestion. You found your answer. Edited July 19, 2020 by tarcoleo Too late. Share this post Link to post Share on other sites
Oldskool 6,640 #56 Posted July 19, 2020 22 minutes ago, tarcoleo said: Too late for suggestion. You found your answer. Whhaaat was your suggestion? Share this post Link to post Share on other sites
tarcoleo 119 #57 Posted July 23, 2020 Old School; I was going to suggest the use of your antique wheels half buried on ether side of your driveway entrance. But using them as shown on that wagon is probably the best answer. Away you go!! -Tom 1 Share this post Link to post Share on other sites
