Lane Ranger 10,945 #1 Posted February 18, 2020 (edited) What size is the 953/1054 idler pulley? we are working on a 953 that either has a stretched #1592. Drive belt (1/2 x 82). Or an idler pulley that is the incorrect size. the previous owner put a cub cadet hydro pump on this which is incorrect. That is why hydro pump does not have the pulley on it. The cub housing sticks out father than the Wheel Horse Hein Werner hydro pump! Edited February 18, 2020 by Lane Ranger Share this post Link to post Share on other sites
squonk 41,020 #2 Posted February 18, 2020 Lane, the pulley looks like the right style. Lets see the belt. Belts don't stretch. The sides wear down causing the belt to fit deeper in the pulley giving the illusion that it's longer. Maybe a "retired guy "here can measure a pulley as I'm leaving for work. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,032 #3 Posted February 18, 2020 Don't know how accurate it is but this is what I have for the 1623 idler pulley V-idler pulley - 3.062" OD - 1623 replaced by 92-7102 (Generic 1614ZZ bearing Used in belt idler for 5-2321 deck) 3.0625" OD x .375" ID for 1/2" belt Garry 1 Share this post Link to post Share on other sites
953 nut 55,065 #4 Posted February 18, 2020 Lane, the balt for a 953/1054 is listed as a 82 1/2" bet and I have found that a Tractor Supply 93"" X 1/2 Kevlar belt (4L-830K) is just right, 1 Share this post Link to post Share on other sites
Lane Ranger 10,945 #5 Posted February 18, 2020 2 hours ago, 953 nut said: Lane, the balt for a 953/1054 is listed as a 82 1/2" bet and I have found that a Tractor Supply 93"" X 1/2 Kevlar belt (4L-830K) is just right, 93 or 83 953 nut? Share this post Link to post Share on other sites
953 nut 55,065 #6 Posted February 18, 2020 3 hours ago, Lane Ranger said: 93 or 83 953 nut? 83, I fat fingered that one. 1 Share this post Link to post Share on other sites
Herder 2,354 #7 Posted February 18, 2020 33 minutes ago, 953 nut said: 83, I fat fingered that one. No typing prior to Coffee. 1 1 Share this post Link to post Share on other sites
oliver2-44 9,679 #8 Posted February 19, 2020 Any back story to the green paint remnants? What was someone trying to access with those torch cut holes? Share this post Link to post Share on other sites
Lane Ranger 10,945 #9 Posted February 19, 2020 1 hour ago, oliver2-44 said: Any back story to the green paint remnants? What was someone trying to access with those torch cut holes? No knowledge on green paint but previous owner tried to access the Ross Steering gear parts without removing. 1 Share this post Link to post Share on other sites
.thumb.JPG.1b2a1a39cdcedb1e001571713350b32c.JPG)