76c12091520h 3,579 #1 Posted February 9, 2020 (edited) We have over $100,000 worth of current , NOS, discontinued, and obsolete inventory to fit Wheel Horse , Toro, Kohler , Onan, Tecumseh , & Briggs and Stratton . Pm here, or call / text with needs. Shipping available on all orders ( Continental US only ) . Stocking most currently available replacement parts for classic Wheel Horse tractors, including belts, cables, pulleys, & switches ( all oem, no aftermarket ) Edited April 2, 2023 by 76c12091520h add photos 3 2 Share this post Link to post Share on other sites
rmaynard 15,266 #2 Posted February 9, 2020 That's a lot of parts. How far back do the Wheel Horse parts go? If we were to give you a part number, would you be able to quickly ascertain whether or not you have it? Share this post Link to post Share on other sites
Pullstart 62,037 #3 Posted February 9, 2020 Correct me if I’m wrong... your father was a dealer and you were cleaning up his inventory? Once the stock is sold out will you be done, or are you starting back up? Share this post Link to post Share on other sites
76c12091520h 3,579 #4 Posted February 10, 2020 All parts are inventoried; the best way is to give me the part #'s and or model and serial #'s. I can tell you within minutes of seeing your messages if we have it or not. Our inventory covers mostly late 60's thru mid 2000's. There is a small amount of early stuff but it's little things like gears, belts, bearings, seals etc. We never stocked sheetmetal , large items, accessories, etc. because it didn't sell. Dad was a dealer , but I'm getting into it more and more, buying new old stock when I can, and getting into used parts sales also. 7 4 1 Share this post Link to post Share on other sites
TomB 2 #5 Posted May 6, 2020 I'm looking for new or used (original part) fuel pump for a K161. Let me know if you have or any recommendations where to find. Thanks Share this post Link to post Share on other sites
Louis70 0 #6 Posted May 9, 2020 I am looking for a rim that will fit my 520h. They are very hard to come by anything would help me out at this point. Share this post Link to post Share on other sites
Hencho 1 #7 Posted July 13, 2020 Hello, I’m reworking my Sundstrand 90-2001 pump. Do you have any parts for this? Share this post Link to post Share on other sites
Lost.soul.collecter 76 #8 Posted October 23, 2020 I'm needing 4 axle seals part number 100443 do you have them if so message me with a price please and thanks Share this post Link to post Share on other sites
Lost.soul.collecter 76 #9 Posted October 23, 2020 Also a price on them head lights lenses and hud caps thanks Share this post Link to post Share on other sites
Jack695 0 #10 Posted November 4, 2020 Looking for a spindle shaft for a mower deck. Deck is for a D160 Deck model # 65-48XSO1 Part no. on Shaft Spindle is 104890. Part of Spindle Assy 104891. Deck year 1976. Thanks so much in advance. Regards John Price 695retired@gmail.com Share this post Link to post Share on other sites
Jack695 0 #11 Posted December 1, 2020 How about mower blades? 16in long, for a 48in deck (65-48SX01)? And I see you have some of those scalloped edge dome washers- I'd like a price for 6 of those. Any idea where I could get an Ammeter for the dash of my D160? Share this post Link to post Share on other sites
Jack695 0 #12 Posted December 1, 2020 Forgot: If you dont have this, maybe you could point me in the right direction-- I need a gas cap. Its for the large tank the D series use. I think it was originally galvanized and 2 1/4" maybe? Cant find an original so far. The one I have just doesnt fit. I wouldnt mind one of the ones with a fill needle in it if you know one that will fit....Appreciate all your help. By the way, I think I'm going to need another of your Spindle Assemblies. Hope you have one left! Share this post Link to post Share on other sites
tractorking 4 #13 Posted December 27, 2020 I am looking for a throttle cross shaft with the attached arm (ball stud from factory) to fit a Kohler 14hp Carter Carb K321S,spec # is 60137.Any suggestions? The shaft from a Walbro carb will work,but does not have the ball stud. Share this post Link to post Share on other sites
Darb1964 1,035 #14 Posted December 27, 2020 I need a head light lens for my 1067,looks like the ones you have photo of. $ Thanks Share this post Link to post Share on other sites
Jkirn1965 0 #15 Posted April 19, 2021 I am looking for a headlight lens to a 1972 GT 14 wheel horse Share this post Link to post Share on other sites
76c12091520h 3,579 #16 Posted April 19, 2021 6 hours ago, Jkirn1965 said: I am looking for a headlight lens to a 1972 GT 14 wheel horse PM sent Share this post Link to post Share on other sites
manant 57 #17 Posted April 23, 2021 I need 3 double d mower blades for a 48" deck. The part number is 100202. Share this post Link to post Share on other sites
76c12091520h 3,579 #18 Posted April 24, 2021 6 hours ago, manant said: I need 3 double d mower blades for a 48" deck. The part number is 100202. PM sent Share this post Link to post Share on other sites
kevincva1 24 #19 Posted May 9, 2021 looking for two parts 1- 2879 cable clip 2-105971 cable clamp Both parts are for the throttle cable on a C101 Share this post Link to post Share on other sites
kitkit 133 #20 Posted May 18, 2021 need a key switch for a 1277 ,thank you Share this post Link to post Share on other sites
mark v 0 #21 Posted May 23, 2021 On 2/9/2020 at 9:21 PM, 76c12091520h said: All parts are inventoried; the best way is to give me the part #'s and or model and serial #'s. I can tell you within minutes of seeing your messages if we have it or not. Our inventory covers mostly late 60's thru mid 2000's. There is a small amount of early stuff but it's little things like gears, belts, bearings, seals etc. We never stocked sheetmetal , large items, accessories, etc. because it didn't sell. Dad was a dealer , but I'm getting into it more and more, buying new old stock when I can, and getting into used parts sales also. I am looking for the drive belt for my C121 tractor 91-12KS01-13771 ? 178 ID tag Made 1978. I would like the part number and the cost ideally would like 2 mark v. Mav2e2@gmail.com Share this post Link to post Share on other sites
76c12091520h 3,579 #22 Posted May 24, 2021 2 hours ago, mark v said: I am looking for the drive belt for my C121 tractor 91-12KS01-13771 ? 178 ID tag Made 1978. I would like the part number and the cost ideally would like 2 mark v. Mav2e2@gmail.com PM sent Share this post Link to post Share on other sites
wallter large 2 #23 Posted July 22, 2021 how about steering wheel 7469 insert Share this post Link to post Share on other sites
76c12091520h 3,579 #24 Posted July 22, 2021 14 minutes ago, wallter large said: how about steering wheel 7469 insert Share this post Link to post Share on other sites
khawk 0 #25 Posted March 3, 2022 I am looking for a 1611 pulley. Share this post Link to post Share on other sites