WHX?? 48,763 #1 Posted February 8, 2020 This probably belongs in the tools/equipment section but I don't care ain't often I come up with a good idea these days! Mods can move it they like.. Rescued this old cart out of Dad's garage... it has casters on it... anybody care to guess what it to be used for? Title of this section is a clue. Couple of strategically placed holes and some tearoff cardboard for easy clean up. 8 Share this post Link to post Share on other sites
953 nut 55,065 #2 Posted February 8, 2020 I have the same two hole layout on my transmission work table, one for the input shaft and one for the axle. 2 1 Share this post Link to post Share on other sites
ebinmaine 67,266 #3 Posted February 8, 2020 S'pose you'd be using that as transmission workin-on table... 1 1 Share this post Link to post Share on other sites
WHX?? 48,763 #4 Posted February 8, 2020 Well I guess that was easy! 'Spose you smartys have a differential holder too! 2 1 3 Share this post Link to post Share on other sites
ebinmaine 67,266 #5 Posted February 8, 2020 1 minute ago, WHX24 said: Well I guess that was easy! 'Spose you smartys have a differential holder too! I haven't even got the table.... Thought about building one a time or two but haven't got to it yet... I do like your diff holder. I just use a block of wood and a fair pile of patience. Share this post Link to post Share on other sites
Pullstart 62,783 #6 Posted February 8, 2020 Great way to repurpose a different bench in the shop! 1 1 Share this post Link to post Share on other sites
WHX?? 48,763 #7 Posted February 8, 2020 What's nice is the casters & your waiting for bearings to show up just roll it out of the way. Need to come up with some storage containers for extra bearings, seals, dog points etc. For the first shelf. .. spare trannys going on the middle shelf. Got tired of clamping them in a vise... very unstable and almost lost the whole shebang once. 5 Share this post Link to post Share on other sites
Achto 27,502 #8 Posted February 8, 2020 So does this mean that you will have tranny ready for paint next weekend??? You can even put it back together, I'll paint it as an assembly, that way you don't have to worry about scratching it. 5 Share this post Link to post Share on other sites
ebinmaine 67,266 #9 Posted February 8, 2020 I want you guys to know I just showed this to Trina. I showed her the title of the thread. Guess What This Is.... She says to me "It's clearly a table with holes." I had no argument. She won. 7 Share this post Link to post Share on other sites
WHNJ701 4,165 #10 Posted February 8, 2020 great minds must think alike, I made the same thing about a year ago! 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,490 #11 Posted February 8, 2020 Very nice! I too have several work tables with holes in them... Though, mine are from drilling through projects to far and leaving holes in the table surface... 6 Share this post Link to post Share on other sites
squonk 41,020 #12 Posted February 8, 2020 (edited) 13 hours ago, WHX24 said: This probably belongs in the tools/equipment section but I don't care ain't often I come up with a good idea these days! Mods can move it they like.. Rescued this old cart out of Dad's garage... it has casters on it... anybody care to guess what it to be used for? Title of this section is a clue. Couple of strategically placed holes and some tearoff cardboard for easy clean up. Hope you didn't strain yourself cutting through that cardboard!! I was going to say a "Whack a Mole " table! Or one of those "aptitude test " thingy's Edited February 8, 2020 by squonk 8 Share this post Link to post Share on other sites
