Jim Walker 6 #1 Posted January 30, 2020 I have a Model 857 that I still use to mow with. I have an old manual that indicated oil required but does not specify type or amount. Please advise. Jim Walker Share this post Link to post Share on other sites
ebinmaine 67,265 #2 Posted January 30, 2020 Pretty much any 90 weight or 80w 90 gear oil. 1 1 Share this post Link to post Share on other sites
ebinmaine 67,265 #3 Posted January 30, 2020 Quantity on that one should be about 1.5 quarts. Share this post Link to post Share on other sites
stevasaurus 22,706 #4 Posted January 30, 2020 Welcome to Red Square Jim. Eric is right on with 90wt. You want to fill until it starts to seep out the fill plug on the left side of the transmission near the rear axle. Approx 1.5 qts like Eric said. Share this post Link to post Share on other sites
Jim Walker 6 #5 Posted January 30, 2020 To all, Thanks for the responses. I thought it would be 80 or 90 weight oil, more like the rear end on a car. As an aside, the tractor was my Dads back from 196-67. I probably starting mowing the yard about then, it has lasted thru a few Ohio homes and is now with me in Florida. If I can keep it running I will give it to my son. 8HP Kohler engine, I have the dozer blade for it also. May run forever. 2 4 Share this post Link to post Share on other sites
ebinmaine 67,265 #6 Posted January 30, 2020 12 minutes ago, Jim Walker said: If I can ..... No worries on that one. This website will have more than enough information and help to be able to keep that thing going forever. 1 Share this post Link to post Share on other sites
WHX?? 48,762 #7 Posted January 30, 2020 (edited) Jim 857 is a go to worker of mine! She a got new axle bearings this winter and maybe a motor refresh next winter. Time for some 857 pics! Just one of the many great things about RS is the way the pics just pop at ya not those itty bitty thumbnails like other sites! Did I mention the fellas like their pics here Mr. Walker?!?! Edited January 30, 2020 by WHX24 3 2 2 Share this post Link to post Share on other sites
squonk 41,020 #8 Posted January 30, 2020 (edited) WHO DOESN'T LIKE 857 PICS! HHHOOOWWWAAARRRDDD!!! Edited January 30, 2020 by squonk 4 1 1 Share this post Link to post Share on other sites
WHX?? 48,762 #9 Posted January 31, 2020 One question here tho Mike ... is that a trailer queen or a worker? Any pics of it in the dirt? Share this post Link to post Share on other sites
Mr Magoo 226 #10 Posted January 31, 2020 9 hours ago, Jim Walker said: I have a Model 857 that I still use to mow with. I have an old manual that indicated oil required but does not specify type or amount. Please advise. Jim Walker The original manual called for 10W-40, but the updated lubrication chart says SAE 90-140 Service GL-5. Share this post Link to post Share on other sites
squonk 41,020 #11 Posted January 31, 2020 8 hours ago, WHX24 said: One question here tho Mike ... is that a trailer queen or a worker? Any pics of it in the dirt? HHHOOOWWWAAARRRDDD!!! is my yard tug/ show cruiser. Notice the mud splashed on the tires in the first pic after puddle jumping at our steam show 2 ys. ago. I added a Bad Boy air horn to go along with the bike bell since! 1 Share this post Link to post Share on other sites
953 nut 55,062 #12 Posted January 31, 2020 16 hours ago, Jim Walker said: the tractor was my Dads back from 196-67. I probably starting mowing the yard about then, it has lasted thru a few Ohio homes and is now with me in Florida. If I can keep it running I will give it to my son. Always love to hear about a being passed down from generation to generation. With poper care and upkeep I'm sure your son will get a lot of seat time too. 1 Share this post Link to post Share on other sites
Lane Ranger 10,945 #14 Posted January 31, 2020 (edited) Two of the best charts you can use to keep track of your Wheel Horse tractor requirements. I keep them on the wall of the garage. Edited January 31, 2020 by Lane Ranger 2 Share this post Link to post Share on other sites
