My next custom Wheel Horse

[19richie66 17,500]

Thought of you today. Saw this at the Flywheeler’s show

[WHX?? 48,814]

Right up his alley Richie ...you run into Lane Ranger ther?

[oliver2-44 9,732]

To bad it's not a Wheel Horse.  A "Mobil Bus Stop" like that would get a lot of mileage at the Big Show

[8ntruck 6,998]

Looks like the driver might have to sit sidesaddle on that rig.

[953 nut 55,189]

10 hours ago, oliver2-44 said:

A "Mobil Bus Stop" like that would get a lot of mileage at the Big Show

What say you Mike, @squonk?                                                 

[squonk 41,067]

1 hour ago, 953 nut said:

What say you Mike, @squonk?                                                 

I'm thinking a lot of us including me would be banned from sittin in the middle! 

[rjg854 11,360]

But does Mikey like it  @squonk

[squonk 41,067]

23 minutes ago, rjg854 said:

But does Mikey like it  @squonk

As long as I can drive it through the parade! 

 

[Pullstart 62,834]

Cleaning house a bit... set this hood here.  Maybe I should change my plans a bit?  I’m not really, but don’t it look sweet?

 

 

 

 

[Pullstart 62,834]

I still like this square hood better...

 

 

[ebinmaine 67,422]

I'm normally a fan of the 70s hood and Trina of the 60s square hood.

 

In this case I'd have to say the 60s hood is BETTER.

 

 

[Pullstart 62,834]

It’s just screaming to be @Ed Kennell‘s hot rod’s cousin!

[ebinmaine 67,422]

You best be gittin you a biggah motah.

[Pullstart 62,834]

Just now, ebinmaine said:

You best be gittin you a biggah motah.

 

Remember, the Predator engine that is going in this build... is the whole reason for this build!  “What should I do with the 6.5 horse engine that @elcamino/wheelhorse gave @19richie66 gave me?”

[ebinmaine 67,422]

Get another one and weld them together for a 13 ?

 

[Pullstart 62,834]

4 minutes ago, ebinmaine said:

Get another one and weld them together for a 13 ?

 

 

Is it really that easy?  Wheeeeelllll then...  I’ll bust out the welder and gimme a 49er.  I’m sure there are enough of ‘em hanging around here!

[dells68 7,498]

I guess anything is possible @pullstart.  Check this out!

 

[ebinmaine 67,422]

19 minutes ago, dells68 said:

I guess anything is possible @pullstart.  Check this out!

 

Oh cooooool.

 

I've seen 4s in video.

Heard of an 8-in-a-row...

 

Neat stuff....

 

[953 nut 55,189]

6 hours ago, pullstart said:

like this square hood better..

              You could slide a Wankel Rotary engine under that hood.

[ebinmaine 67,422]

Oh man...

[Pullstart 62,834]

https://youtu.be/eYn6lpt_EJE

[Pullstart 62,834]

Last night I played with trying to find spot welds on the top skin of the hood.  It’s not that easy every time!  I found plenty of spots they aren’t!  Switching to a wire wheel on the disc grinder made it a little easier to strip paint and not metal, but it was still a challenge.  Finally I flipped the hood over and gave the really rusty areas a good scuff.  They popped pretty well and I will try to measure them and drill from the other side.  I also thought about maybe drilling a small pilot straight through that would be easy to weld shut.

 

 

[Tractorhead 9,064]

On 2/29/2020 at 1:31 AM, ebinmaine said:

Oh man...

Think i have seen another nice option..

 

 

 

Hum, kevin, how about this?

 

with the last Front you‘ve mentioned maybe a real cool GT..

ok, not a horse Engine but plenty of Fun i bet.. 😎

[ebinmaine 67,422]

4 minutes ago, Tractorhead said:

Think i have seen another nice option..

 

 

 

Hum, kevin, how about this?

 

with the last Front you‘ve mentioned maybe a real cool GT..

ok, not a horse Engine but plenty of Fun i bet.. 😎

Don't tempt me....

[Tractorhead 9,064]

Muaaaahahaha... yes, i do😎

 

😂😂😂😂