headlight lens

[briankd 817]

does anyone on here make the lens cover for the older c series headlight ? was talking to my horse dealer and he was to the big show 2 years ago and someone there had them and he bought 6 of them now he thinks he has sold them all 

he is going to dig and see if he has any but if not  hope someone has any ideas

 

brian

[JCM 9,634]

Are you looking for the Lens / with Decal part # 103771 available through Toro or Parts Tree for $ 47.65. Toro may be more $

[ebinmaine 68,879]

Search

 

Toro 103771

 

On fleabay and one pops up for $38.99 with free shipping.

 

[briankd 817]

5 minutes ago, JCM said:

Are you looking for the Lens / with Decal part # 103771 available through Toro or Parts Tree for $ 47.65. Toro may be more $

yes i suppose it fits 1975 c-120 clear lens 4 screws to outside of headlight assembly haven't  priced one yet  50 bucks pricey for a piece of plastic but guess it is what it is maybe if my dealer had one i could get it cheaper

[JCM 9,634]

I paid $ 37.00  for one at a Toro dealer 5 years ago , Parts tree may be less  money. 1977 c-120 is what I replaced it on.

[gwest_ca-(File Mod) 11,133]

Part number changed

https://www.psep1.biz/arinet.asp?aribrand=TO#/s/TO//98-1713/1/

 

Garry

[Lee1977 6,871]

I got off Ebay last year I think it was 37,50. 

 

[MikMacMike 479]

32 minutes ago, Lee1977 said:

I got off Ebay last year I think it was 37,50. 

 

Lee1977, I see some hubs have been altered, have you any pics and what or how you altered?

[Lee1977 6,871]

31 minutes ago, MikMacMike said:

Lee1977, I see some hubs have been altered, have you any pics and what or how you altered?

Those are 3500# trailer spindles and hubs. I had a bad wheel and bearing to cut up one of my spindles. This was back around1989 I was also have trouble with the tie rods. So I just change all of it.

I cut the Wheel Horse spindle off at round 3" and cut 2" off the trailer spindles drilled them for the WH spindles. I also drilled a 1/2" hole between the bearing surfaces welded there and the back side.

 

 

[MikMacMike 479]

17 minutes ago, Lee1977 said:

Those are 3500# trailer spindles and hubs. I had a bad wheel and bearing to cut up one of my spindles. This was back around1989 I was also have trouble with the tie rods. So I just change all of it.

I cut the Wheel Horse spindle off at round 3" and cut 2" off the trailer spindles drilled them for the WH spindles. I also drilled a 1/2" hole between the bearing surfaces welded there and the back side.

 

 

Excellent job there brodere, I aquired 6 or 8, 4 bolt rims and tires off of a golf cart, I havnt looked too deeply into it yet but sure like your set up, Im also going to beef up the , I think 3/4" swivel that goes through the front cross member. I have plans to build a front end loader, Im thinking it will assure there is no weakness.  Again thanks bro, I sure like the idea of 5 bolt patern too. Any idea what the max weight for those spindle rim and tire set up is?

[Lee1977 6,871]

2 minutes ago, MikMacMike said:

Excellent job there brodere, I aquired 6 or 8, 4 bolt rims and tires off of a golf cart, I havnt looked too deeply into it yet but sure like your set up, Im also going to beef up the , I think 3/4" swivel that goes through the front cross member. I have plans to build a front end loader, Im thinking it will assure there is no weakness.  Again thanks bro, I sure like the idea of 5 bolt patern too. Any idea what the max weight for those spindle rim and tire set up is?

The spindles and hubs are rated at 3500 # I have 6 ply tires don't know how much they are rated for.  We did have turn the hub down some to get it to fit in the 8" wheel.

[MikMacMike 479]

Thanks bro