Duff 206 #1 Posted December 26, 2019 Hi, folks! Hope everyone had a great Christmas! Got a question about the main drive belt for a 1990 520H. Toro parts manual shows two numbers: 114895, and 107939. The second number has been superceded to 93-9809. I ordered one and it came through just a smidge too long. When installed the tensioner pulley forces it down to where the belt almost touches itself. Has anyone else had this problem, or is the 114895 belt, which still shows as an active number through Jack's Small Engines, just a fraction shorter? Thanks to all and Happy New Year! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,096 #2 Posted December 26, 2019 107939 fits the twin cylinder 8-speed models. The hydro's use the 114895 https://www.wheelhorseforum.com/search/?&q=114895&type=downloads_file&search_and_or=or&sortby=relevancy Garry Share this post Link to post Share on other sites
Duff 206 #3 Posted December 26, 2019 Thanks, Garry! Sure would have been nice if the parts blow-up had that notation. Fortunately Jack's is decent about returns so I'll get the right one headed this way. Happy New Year! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,096 #4 Posted December 26, 2019 That is the problem with the online parts lists supplied by Toro. A parts manual shared by more than one model. One way to tell is look to see if more than one engine and/or transmission is listed. If it is look elsewhere for the correct part numbers. Garry Share this post Link to post Share on other sites
squonk 41,337 #5 Posted December 26, 2019 Napa #1 for 14895 is 5l830w 5/8" X 83" Support your local vendors when you can before going on line. They may be gone before you know it! Share this post Link to post Share on other sites
