Fmerentino 0 #1 Posted December 4, 2019 I just installed the plow on my 312-8 but for some reason the raise and lower seems to be working backwards. When I push the arm forward it raises and does not stay locked. When I pull back it lowers? Can anyone help me out? Share this post Link to post Share on other sites
ebinmaine 67,288 #2 Posted December 4, 2019 Can you post a pic to show how you have it hooked up? I'm thinking maybe you have the Link bar going to the back of the lift pivot instead of the front? Share this post Link to post Share on other sites
Lee1977 6,647 #3 Posted December 4, 2019 (edited) There are two lever on the lift bracket. I believe you attach to the lever that is for the rear lift. It's on the left side and hangs down.. The one in the center just behind the steering shaftis is the one is for the mower deck, and snow plow. Don't know how you have it attached, but if the the connection is too short it will not latch up. Edited December 4, 2019 by Lee1977 Share this post Link to post Share on other sites
857 horse 2,581 #4 Posted December 4, 2019 IM ALL IN ON THIS ONE......I DONT KNOW AN ANSWER........BUT THE SOLUTION WILL BE EPIC,,,,,(((( WORKING CORRECTLY))))) THE CROWD WILL CHIME IN SHORTLY,,,, OH AND WELCOMES YOU .............. REMEMBER....THIS IS ALL ABOUT SEAT TIME..!!!!!!!! HOWARD IN VA 857 HORSE 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #5 Posted December 4, 2019 Welcome to the forum Garry 1 Share this post Link to post Share on other sites
Tach-a-matic 357 #6 Posted December 4, 2019 Lots of useful info in this drawing thanks for posting. Share this post Link to post Share on other sites
